The following standards are composed by government agencies and globally recognized organizations in every effort to prevent faultiness in technology and to provide health and safety. Without such standards and regulations, the chances of helicopters falling from the sky or even radio waves interfering with incorrect devices would all have a higher probability of occurring. Thankfully, these tests and regulations are globally recognized to maintain and improve the quality of both technological devices and the public they seek to serve. Since 1981, Advanced Test Equipment Rentals (ATEC) has been committed to providing customers with a variety of test equipment and solutions to meet these standards as well as the standards themselves to comply by them. Pre-compliance and compliance testing can be achieved with ATEC's large database of international test and compliance standards.
Aerospace & Avionics
Automotive
- DaimlerChrysler Standards
- ECE Standards
- Fiat Standards
- Ford Standards
- GM Standards
- JASO Standards
- LV Standards
- Mercedes-Benz Standards
- Peugeot Standards
- Renault Standards
- SAE Standards
Commercial
- ANSI/ASA Standards
- ANSI/IEEE Standards
- CE Marking
- EN Standards
- FCC Standards
- IEC CISPR Standards
- IEC Standards
- ISO Standards
- ISTA Standards
- JEDEC Standards
- UL Standards
Communications
- AEN Standards
- ANSI/BICSI Standards
- ANSI/SCTE Standards
- ANSI/TIA Standards
- ITU-T Standards
- NEBS Standards (Network Equipment Building System)
- TIA-EIA Standards
Environmental Health & Safety
Military
Standards A-Z
Directory of International Test and Compliance Standards- AEN 134: OTDR Testing Basic
- AEN 135: Fiber Optic Testing Procedure
- Airbus ABD0100.1.8: Environmental Conditions and Test Requirements Associated with Qualification
- ANSI C62.45: Guide On Surge Testing For Equipment Connected To Low-Voltage AC Power Circuits
- ANSI C63.16: American National Standard Guide For Electrostatic Discharge Test Methodologies And Acceptance Criteria For Electronic Equipment
- ANSI C63.2: American National Standard For Specifications Of Electromagnetic Interference And Field Strength Measuring Instrumentation In The Frequency Range 9 kHz To 40 GHz
- ANSI C63.4: American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
- ANSI/ASA S1.4 - 1983 (R2006): Specification for Sound Level Meters
- ANSI/ASA S1.42 2001 (R2011): Design Response of Weighting Networks for Acoustical Measurements
- ANSI/ASA S1.43-1997 (R2007): Specifications for Integrating-Averaging Sound Level Meters
- ANSI/IEEE C37.90: Standard for Relays and Relay Systems Associated with Electric Power Apparatus
- ANSI/IEEE C37.90.1: Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus
- ANSI/IEEE C62.41: IEEE Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits
- ANSI/IEEE C95.1: Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz
- ANSI/SCTE 81: Surge Withstand Test Procedure
- ANSI/TIA-568-C.3: “Optical Fiber Cabling Components Standard”
- ANSI/TIA-568.1-D: “Commercial Building Telecommunications Cabling Standard”
- ANSI/TIA/EIA 526-7: Measurement of Optical Power Loss of Installed Single-Mode Fiber Cable Plant
- ASTM D2247: Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
- ASTM D3103: Standard Test Method for Thermal Insulation Performance of Distribution Packages
- ASTM D3580: Standard Test Methods for Vibration Test of Products
- ASTM D4332: Standard Practice for Conditioning Containers Packages and Packaging Components
- ASTM E1171 - Standard Test Methods For Photovoltaic Modules in Cyclic Temperature and Humidity Environments
- ASTM F2825: Standard Practice for Climatic Stressing of Packing Systems for Single Parcel Delivery
- BICSI 006-2015 Distributed Antenna System (DAS) Design and Implementation Best Practices
- Boeing D6-16050-4: Electromagnetic Interference Control Requirements
- Boeing D6-16050-5: Electromagnetic Interference Control Requirements for Composite Airplanes
- Canada Safety Code 6: Radiofrequency Exposure Guidelines, 3 kHz – 300 GHz
- CE Mark
- CISPR 11: Industrial, scientific and medical equipment
- CISPR 12: Vehicles, boats, and internal combustion engine driven devices
- CISPR 14-1: Electromagnetic compatibility - Household Appliances
- CISPR 14-2: Electromagnetic compatibility - Part 2: Immunity
- CISPR 16-1-1: Measuring apparatus
- CISPR 16-1-3: Ancillary equipment – Disturbance power
- CISPR 16-1-4: Ancillary equipment – Radiated disturbances
- CISPR 16-2: Specification for radio disturbance and immunity
- CISPR 22: Information technology equipment
- CISPR 24: Immunity Testing of ITE
- CISPR 25: Vehicles, boats and internal combustion engines
- CISPR 32: Electromagnetic compatibility of multimedia equipment
- DaimlerChrysler DC-10540
- DaimlerChrysler DC-10614
- DaimlerChrysler DC-10615
- DaimlerChrysler PF-9326
- Directive 2013/35/EU: Occupational Exposure to Electromagnetic Fields
- ECE R10.4
- EN 45502-1: Implants for surgery - Active implantable medical devices - General requirements for safety, marking and for information to be provided by the manufacturer
- EN 45502-2-2: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (includes implantable defibrillators)
- EN 50082-1: Electromagnetic compatibility - Generic immunity standard - Part 1: Residential, commercial and light industry
- EN 50082-2: Electromagnetic compatibility - Generic immunity standard - Part 2: Industrial Environment
- EN 50173: Information technology - Generic cabling systems
- EN 50191: The Erection and Operation of Electrical Test Installations
- EN 55011: Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
- EN 55022: Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
- EN 61000-6: Electromagnetic compatibility (EMC) - Part 6: Generic Standards
- EPA Method 10: Determination Of Carbon Monoxide Emissions From Stationary Sources (Instrumental Analyzer Procedure)
- EPA Method 3A: Determination Of Oxygen And Carbon Dioxide Concentrations in Emissions from Stationary Sources (Instrumental Analyzer Procedure)
- EPA Method 6C: Determination of Sulfur Dioxide Emissions from Stationary Sources (Instrumental Analyzer Procedure)
- EPA Method 7E: Determination Of Nitrogen Oxides Emissions From Stationary Sources
- EUROCAE ED-14: Environmental Conditions and Test Procedures for Airborne Equipment
- FCC Part 15: Radio Frequency Devices
- Fiat 9.90110
- Ford EMC-CS-2009
- FORD FMC1278
- GM GMW3097: EMC Requirements for Automotive Products
- GM GMW3172: General Specification for Electrical/Electronic Components Environmental/Durability
- ICNIRP 1998: Guidelines for Limiting EMF Exposure, 0 – 300 GHz
- ICNIRP 2010: Guidelines for Limiting EMF Exposure, 1 Hz – 100 kHz
- IEC 60050-444 International Electrotechnical Vocabulary Part 444: Elementary Relays
- IEC 60255: Electrical Relays
- IEC 60270: Partial Discharge Measurements
- IEC 60533: EMC Testing of Ships with Metallic Hulls
- IEC 60601-1-2: Medical Electrical Equipment - Collateral standard: Electromagnetic compatibility - Requirements and tests
- IEC 61000-3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 75 A per phase and not subject to conditional connection.
- IEC 61000-3-12: Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase
- IEC 61000-3-13: Electromagnetic compatibility (EMC) Limits - Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems.
- IEC 61000-3-2: Limits - Limits for Harmonic Current Emissions (equipment input current up to and including 16 A per phase)
- IEC 61000-3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection.
- IEC 61000-4-10: Testing and Measurement Techniques Damped Oscillatory Magnetic Field Immunity Test
- IEC 61000-4-11: Testing and Measurement Techniques - Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests
- IEC 61000-4-12: Testing and measurement techniques - Ring wave immunity test
- IEC 61000-4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
- IEC 61000-4-14: Testing and measurement techniques - Voltage fluctuation immunity test
- IEC 61000-4-15: Testing and Measurement Techniques - Flickermeter. Functional and Design Specifications. Basic EMC Publication
- IEC 61000-4-16: Testing and Measurement Techniques – Test for Immunity to Conducted, Common Mode Disturbances in the Frequency Range 0 Hz to 150 kHz
- IEC 61000-4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
- IEC 61000-4-18: Testing and measurement techniques – Damped oscillatory wave immunity test
- IEC 61000-4-19: Test for Immunity to Conducted, Differential Mode Disturbances and Signaling
- IEC 61000-4-2: Electrostatic Discharge Immunity Test
- IEC 61000-4-20 Electromagnetic compatibility (EMC) – Part 4-20: Testing and measurement techniques – Emission and immunity testing in transverse electromagnetic (TEM) waveguides
- IEC 61000-4-21 Electromagnetic compatibility (EMC) Part 4-21: Testing and measurement techniques Reverberation chamber test methods
- IEC 61000-4-27: Unbalance, immunity test
- IEC 61000-4-28: Testing and measurement techniques - Variation of power frequency, immunity test
- IEC 61000-4-29 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on DC input power port immunity test
- IEC 61000-4-3: Radiated, radio-frequency, electromagnetic field immunity test
- IEC 61000-4-30: Testing and Measurement Techniques - Power Quality Measurement Methods.
- IEC 61000-4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test
- IEC 61000-4-34: Testing and Measurement Techniques - Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests (>16 A)
- IEC 61000-4-39:2017: Electromagnetic Compatibility Immunity Requirements
- IEC 61000-4-4: Electrical Fast Transient (EFT) / EMC Burst Immunity Test Standard
- IEC 61000-4-5: Testing and Measurement techniques - Surge Immunity Test
- IEC 61000-4-6: Immunity to Conducted Disturbances, Induced by Radio Frequency Fields
- IEC 61000-4-7: General Guide on Harmonics and Interharmonics Measurements and Instrumentation
- IEC 61000-4-8 Electromagnetic Compatibility (EMC) - Part 4-8: Testing and Measurement Techniques - Power Frequency Magnetic Field Immunity Test
- IEC 61000-4-9 Electromagnetic Compatibility (EMC) - Part 4-9: Testing and Measurement Techniques - Pulsed Magnetic Field Immunity Test
- IEC 61000-6-2: Immunity Testing of Industrial Equipment
- IEC 61000-6-4: Emission standard for industrial environments
- IEC 61000-6-5: Immunity for Power Station and Substation Environments
- IEC 61010-1: Safety of Measuring, Control and Laboratory Equipment
- IEC 61326: EMC Testing of Laboratory Equipment
- IEC 61340-3-1: Methods for Replication of Electrostatic Effects - Human Body Model (HBM) Electrostatic Discharge Test Waveforms
- IEC 61340-3-2: Methods for Replication of Electrostatic Effects – Machine Model (MM) Electrostatic Discharge Test Waveforms
- IEC 61672-1: Electroacoustics – Sound level meters – Part 1: Specifications
- IEC 61672-2: Electroacoustics – Sound level meters – Part 2: Pattern evaluation tests
- IEC 61672-3: Electroacoustics – Sound level meters – Part 3: Periodic tests
- IEC 61850: Communication Networks and Systems in Substations
- IEC 62037: Passive RF and Microwave Devices, Intermodulation Level Measurement
- IEC 62233: Electromagnetic Fields of Household Appliances and Similar Apparatus with Regard to Human Exposure
- IEEE 519-2014: Recommended Practice & Requirements for Harmonic Control
- ISO 10605: Road Vehicles—Test Methods for Electrical Disturbances from Electrostatic Discharge
- ISO 11452-4:2020 BCI Testing in Road Vehicles
- ISO 11452: Immunity Testing of Road Vehicle Components
- ISO 11801:2002 - Information technology – Generic cabling for customer premises
- ISO 13766-1: 2018 Earth-Moving and Building Construction Machinery
- ISO 14117: EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices
- ISO 14644 Series: Cleanroom Standards
- ISO 14982: Agricultural and Forestry Machinery
- ISO 16750-2: Road Vehicles: Environmental Conditions and Testing for Electrical and Electronic Equipment
- ISO 21501-4: Light Scattering Airborne Particle Counter for Clean Spaces
- ISO 7196:1995 Acoustics — Frequency-weighting characteristic for infrasound measurements
- ISO 7637-2: Electrical Transient Conduction Along Supply Lines Only
- ISO 7637: Road Vehicles – Electrical Disturbances from Conduction and Coupling
- ISTA 7 Series: Development Tests
- ITU-T K Series: Protection Against Interference
- ITU-T Y.1564
- JASO D001-94: Environmental Testing Methods for Automotive Electronic Equipment
- JEDEC JESD22-A110: Highly – Accelerated Temperature and Humidity Stress Test (HAST)
- LV 123
- LV 124 Electric and Electronic Components in Motor Vehicles up to 3.5t
- LV 148: Electric and Electronic components for vehicles
- Mercedes-Benz MBN 10284-2
- MIL-HDBK-5400 Paragraph 4.6.2.6: Shock
- MIL-STD-1275: Characteristics of 28 Volt DC Input Power to Military Vehicles
- MIL-STD-1399-300: Interface Standard for Shipboard Systems
- MIL-STD-1553: Aircraft Internal Time Division Command/Response Multiplex Data Bus
- MIL-STD-1576: Electroexplosive Subsystem Safety Requirements and Test Methods For Space Systems
- MIL-STD-188-125-2: HEMP Protection for Ground-Based C41 Facilities Performing Critical Missions, Part 2
- MIL-STD-461
- MIL-STD-461F: Electromagnetic Interference Characteristics of Equipment
- MIL-STD-461G CE101, CE102: Conducted Emissions, Audio Frequency Currents and Radio Frequency Potentials
- MIL-STD-461G CE106: Conducted Emissions, Antenna Port
- MIL-STD-461G CS101: Conducted Susceptibility, Power Leads
- MIL-STD-461G CS103: Conducted Susceptibility, Antenna Port, Intermodulation
- MIL-STD-461G CS104: Conducted Susceptibility, Antenna Port, Rejection of Undesired Signals
- MIL-STD-461G CS105: Conducted Susceptibility, Antenna Port, Cross-Modulation
- MIL-STD-461G CS106: Conducted Susceptibility, Transients, Power Leads
- MIL-STD-461G CS109: Conducted Susceptibility, Structure Current
- MIL-STD-461G CS114: Conducted Susceptibility, Bulk Cable Injection
- MIL-STD-461G CS115: Conducted Susceptibility, Bulk Cable Injection, Impulse Excitation
- MIL-STD-461G CS116: Conducted Susceptibility, Damped Sinusoidal Transients, Cables and Power Leads, 10 kHz to 100 MHz
- MIL-STD-461G CS117: Conducted Susceptibility, Lightning Induced Transients, Cables and Power Leads
- MIL-STD-461G CS118: Personnel Borne Electrostatic Discharge (ESD)
- MIL-STD-461G RE101: Radiated Emissions, Magnetic Field
- MIL-STD-461G RE102: Radiated Emissions, Electric Field
- MIL-STD-461G RE103: Radiated Emissions, Antenna Outputs
- MIL-STD-461G RS101: Radiated Susceptibility, Magnetic Field
- MIL-STD-461G RS103: Radiated Susceptibility, Electric Field
- MIL-STD-461G RS105: Radiated Susceptibility, Transient Electromagnetic Field, or EMP (Electromagnetic Pulse)
- MIL-STD-461G: Electromagnetic Interference Characteristics of Equipment
- MIL-STD-464: RF Environmental Effects on Systems
- MIL-STD-704: Aircraft Electric Power Characteristics
- MIL-STD-750: Test Methods for Semiconductor Devices
- MIL-STD-810G: Test Method Standard for Environmental Engineering Considerations and Laboratory Tests
- MIL-STD-883: Test Method Standard, Microcircuits
- Peugeot PSA B21 7110
- Renault 36-00-808
- RTCA/DO-160 Section 10: Waterproofness Testing
- RTCA/DO-160 Section 15: Magnetic Effect
- RTCA/DO-160 Section 16: Power Input
- RTCA/DO-160 Section 17: Voltage Spike
- RTCA/DO-160 Section 18: Audio Frequency Conducted Susceptibility – Power Inputs
- RTCA/DO-160 Section 19: Induced Signal Susceptibility
- RTCA/DO-160 Section 20: Radio Frequency Susceptibility (Conducted/Radiated)
- RTCA/DO-160 Section 21: Emission of Radio Frequency Energy
- RTCA/DO-160 Section 22: Lightning Induced Transient Susceptibility
- RTCA/DO-160 Section 23: Lightning Direct Effects
- RTCA/DO-160 Section 25: Electrostatic Discharge (ESD)
- RTCA/DO-160 Section 5: Temperature Variation Testing
- RTCA/DO-160 Section 6: Humidity Testing
- RTCA/DO-160 Section 8: Vibration Testing
- SAE J1113: Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicle
- SAE J551: Measurement of Magnetic and Electric Strength
- Standard PRC-005-1.1b: Transmission and Generation Protection System Maintenance and Testing
- Standard PRC-005-2 Protection System Maintenance Schedule
- Telecordia GR-1089 Core: Electromagnetic Compatibility and Electrical Safety - Generic Criteria for Network Telecommunications Equipment
- TIA/EIA-568-B: Commercial Building Telecommunications Cabling Standard
- UL 1414 Section 16: Impulse Voltage Test
- UL 1449: Surge Protective Devices (SPD)
- UL 1703: Flat-Plate Photovoltaic Modules and Panels
- UL 1741: Inverter testing, Converters, Controllers and Interconnection System Equipment for Use With Distributed Energy Resources
- UL 508A: Industrial Control Panels
- UL 60950: Safety of Information Technology Equipment
- UL 6500: Audio/Video and Musical Instrument Apparatus for Household, Commercial, and Similar General Use
- UL 864: Control Units and Accessories for Fire Alarm Systems
- UL 943: Ground-Fault Circuit-Interrupters