Solar 2352-1 Audio Power Amplifier, 15 Hz - 150 KHz

The Solar 2352-1 Audio Power Amplifier has a wide band frequency response and is capable of providing up to 300 Watts at 1000 Hz into 2.0 Ω at low distortion levels. The 2352-1 requires approximately 0.5 Volts signal input for maximum power output at 1000 Hz. It incorporates feed-back circuit for flat response within 1 dB from 30 Hz to 100 KHz at reduced power levels. The -3 dB points are 25 Hz and 120 KHz when using the 6220-1A transformer with the secondary loaded in 0.5 Ω.

The 2352-1 utilizes silicon transistors for excellent stability. It is designed for laboratory use with a portable case and conventional ¾" binding posts. A panel mounted fuse and an overload trip indicator protect the instrument from excessive output current or over-voltage conditions encountered in some applications.

The Solar Model 2352-1 200 W Solid State Audio Power Amplifier was specifically designed for use with the Solar Type 6220-1A Audio Isolation Transformer in making audio frequency susceptibility tests as required by MIL-STD-461 CS101. It also can be used for other EMI specifications.

Product Info Related Products

Frequency range	15 Hz to 150 KHz
Input voltage	0.6 Volts for maximum power output at 1000 Hz
Input Impedance	600 Ω (For a 50 Ω impedance place a 50 Ω resistor across the input terminal)
Output power	300 Watts into 2.0 Ω (non-inductive)
Output Impedance	2.0 Ω
Output voltage	25 volts RMS into 2.0 Ω (non-inductive)
Power requirements	115 Volts, 60 Hz, 10 Amps
Gain control	Panel mounted input level control
Terminals	3/4" Binding posts for input and output
Two A.C. line fuses (10 Amps)	One DC power supply fuse (12 Amps)
Two A.C. line fuses (10 Amps)	One output overload fuse (15 Amps)
Size	17 1/4" wide x 9 1/4" high x 13/4" deep
Weight	30 lbs.

Optional Accessories:

Solar Type 6220-1A - 30Hz - 250kHz 200W Audio Isolation Transformer

Solar Type 6220-4 - 30Hz - 250kHz 200W Audio Isolation Transformer

Teseq NSG 4070C Test System for Conducted and Radiated Immunity

Class A power amplifier module can be integrated for different applications:
35 W, 150 kHz to 230 MHz;
40 W, 10 kHz to 400 MHz;

AE Techron 7224 Power Amplifier | DC - 300kHz, 900VA

Frequency bandwidth of DC to 300 kHz at rated power.
Continuous output of over 1,100 watts RMS at 4 ohms.
40 mSec pulses of up to 52 amperes peak into a 0.5 ohm load.

EMC Partner MIL3000 Military Test System

Exceeds maximum test levels in MIL-STD-461
One coupler for tests (CS115 & CS116)
Test report data stored in MIL3000, accessible via USB or Ethernet

EM Test CWS 500N1 Continuous Wave Simulator, 80W

Signal generator 9kHz to 1GHz
Amplitude modulation: 1Hz to 3kHz (0% to 95%)
Pulse modulation: 1Hz - 1kHz (10% to 90%)

AE Techron 3110 Standards Waveform Generator

Includes a large library of Automotive and Aviation Standards’ test routines--complete list available as Supplemental Document under Datasheet on left
Drag and drop interface makes it easy to modify existing tests or build new waveform sequences
Loop entire tests or test sections; repeat loops with increments of up to four variables

Schwarzbeck CDN-M5PE-32A-1000V

Part of the coupling decoupling network series
For conducted common mode immunity testing according to IEC 61000-4-6
Frequency range of 150 kHz to 230 MHz

Fischer Custom Communications F-130A Bulk Current Injector Probe

Broad band high efficiency injection probe
Frequency range of 1 MHz to 700 MHz
Insertion loss of 6 dB or less

Prâna IP-DR250 Bulk Current Injection Probe

Broadband (instantaneous single band) : 10 kHz – 400 MHz
Frequency extension between 4kHz to 10kHz possible with limited power specifications
Typical power: 500 W CW

Solar 7541-1 Spike Receptor Probe

Spike receptor probe (calibrated for use with oscilloscope)
The receptor probe is assembled with a hinged construction
Includes a calibrating resistor mounted in the housing

Com-Power CDN-AF8 Coupling/Decoupling Network (CDN)

Solar 8850-1 Sweep Generator for MIL-STD-461 CS01/CS101

Manual or automatic frequency sweep from 30 Hz to 100KHz
Digital display of frequency and output voltage level or injection voltage level
Remote sensing of voltage being injected into the Equipment Under Test

Teseq NSG 4060 Low Frequency Immunity Test System

Signal generator and integrated power amplifier 15 Hz to 150 kHz
Meets IEC / EN 61000-4-16 in combination with the Extension Unit
Meets IEC / EN 61000-4-19 and other standards

Tektronix TCP303

Easy Current Measurements
Probe Connects Directly to TDS Scope through TEKPROBE™ BNC Interface
Split Core Construction for Easy Circuit Connection

Montena EMP10K-5-500 Short Pulse Generator | 10 kV

Short pulse generator
Meets MIL-STD188-125-1/2 standards
Generates short-duration double exponential current pulses

AE Techron T1000 Magnetic-Field Susceptibility Transformer

Up to 100ARMS secondary current.
Exceeds AF Magnetic Field test requirements of DO 160 Section 19 and Boeing D6-16050-5 Section 7.2.2.
Circuit breaker protected from over-current.

Com-Power CDN-M225E Coupling/Decoupling Network (CDN)

Frequency Range - 150 kHz - 230 MHz
Meets EN 61000-4-6 requirements
Current Rating: 25 Amps

Pearson Electronics 3525 Current Monitor | 5 Hz – 15 MHz

0.1 V/A +1/-0% sensitivity
50 Ω output resistance
Maximum peak current of 5000 A

BOLAB 100-TS Series | DC – 200 kHz, 400 W – 18000 W

DC to 200 kHz full range bandwidth
Rise time / fall time up to 100 V/µs
Arbitrary function with 1 Million memory data points

Amplifier Research CI00402 RF Conducted Immunity System

Fully self-contained state of the art system designed to test RF conducted immunity
The system contains a signal generator a spectrum analyzer a 100W nominal AR amplifier a 10 kHz to 400 MHz directional coupler emcware® control software
a signal generator

Com-Power CLCE-1032 RF Current Probe | 9 kHz – 1000 MHz

Frequency range of 9 kHz to 1000 MHz
Suitable for CISPR, MIL-STD-461, and DO-160
Individual calibration

Frankonia CIT-10 Compact Immunity Test System, 10 kHz - 400 MHz

Conducted RF immunity tests acc. to IEC/EN 61000-4-6 and BCI tests acc. to ISO 11452-4 and MIL–STD 461E
Signal generator, RF-power amplifier, RF-power meter and directional coupler (optional) in one 19”-case
Stand-alone operation possible with optional available netbook

AH Systems BCP-510 Broadband Current Probe | 20Hz - 1MHz

Measures currents on 50 Hz, 60 Hz and 400 Hz powerlines
Individually Calibrated (Transfer Impedance calibration included)
Split Type Clamp-on Design

Solar 7399-2 2,500 Volt Spike Generator for MIL-STD-1399

Repetitive spikes up to 2500 volts peak at two pulses per minute.
Single non-synchronous spike actuated by a push button on the panel.
Sync functions provide for placing the spike on the power frequency waveform of 50, 60 or 400 Hz power lines. The spike can be moved to any point of the sine wave from 0 to 360°

Pacific Power 3150AFX AC & DC Programmable Power Source

AC output, DC output, AC+DC output
DC, 15 to 1,200 Hz frequency range
Single, constant power mode 300V L-N/520V L-L/425Vdc voltage range offers wider operating range