Related Products

Amplifier Research CI00250A RF Conducted Immunity System

Teseq NSG 4070C Test System for Conducted and Radiated Immunity

  • Class A power amplifier module can be integrated for different applications:
  • 35 W, 150 kHz to 230 MHz;
  • 40 W, 10 kHz to 400 MHz;

AE Techron 7224 Power Amplifier | DC - 300kHz, 900VA

  • Frequency bandwidth of DC to 300 kHz at rated power.
  • Continuous output of over 1,100 watts RMS at 4 ohms.
  • 40 mSec pulses of up to 52 amperes peak into a 0.5 ohm load.

EM Test CWS 500N1 Continuous Wave Simulator, 80W

  • Signal generator 9kHz to 1GHz
  • Amplitude modulation: 1Hz to 3kHz (0% to 95%)
  • Pulse modulation: 1Hz - 1kHz (10% to 90%)

AE Techron 3110 Standards Waveform Generator

  • Includes a large library of Automotive and Aviation Standards’ test routines--complete list available as Supplemental Document under Datasheet on left
  • Drag and drop interface makes it easy to modify existing tests or build new waveform sequences
  • Loop entire tests or test sections; repeat loops with increments of up to four variables

Schwarzbeck CDN-M5PE-32A-1000V

  • Part of the coupling decoupling network series
  • For conducted common mode immunity testing according to IEC 61000-4-6
  • Frequency range of 150 kHz to 230 MHz

Fischer Custom Communications F-130A Bulk Current Injector Probe

  • Broad band high efficiency injection probe
  • Frequency range of 1 MHz to 700 MHz
  • Insertion loss of 6 dB or less

Prâna IP-DR250 Bulk Current Injection Probe

  • Broadband (instantaneous single band) : 10 kHz – 400 MHz
  • Frequency extension between 4kHz to 10kHz possible with limited power specifications
  • Typical power: 500 W CW

Solar 7541-1 Spike Receptor Probe

  • Spike receptor probe (calibrated for use with oscilloscope)
  • The receptor probe is assembled with a hinged construction
  • Includes a calibrating resistor mounted in the housing

Com-Power CDN-AF8 Coupling/Decoupling Network (CDN)

Teseq NSG 4060 Low Frequency Immunity Test System

  • Signal generator and integrated power amplifier 15 Hz to 150 kHz
  • Meets IEC / EN 61000-4-16 in combination with the Extension Unit
  • Meets IEC / EN 61000-4-19 and other standards

Tektronix TCP303

  • Easy Current Measurements
  • Probe Connects Directly to TDS Scope through TEKPROBE™ BNC Interface
  • Split Core Construction for Easy Circuit Connection

AE Techron T1000 Magnetic-Field Susceptibility Transformer

  • Up to 100ARMS secondary current.
  • Exceeds AF Magnetic Field test requirements of DO 160 Section 19 and Boeing D6-16050-5 Section 7.2.2.
  • Circuit breaker protected from over-current.

Com-Power CDN-M225E Coupling/Decoupling Network (CDN)

  • Frequency Range - 150 kHz - 230 MHz
  • Meets EN 61000-4-6 requirements
  • Current Rating: 25 Amps

Pearson Electronics 3525 Current Monitor | 5 Hz – 15 MHz

  • 0.1 V/A +1/-0% sensitivity
  • 50 Ω output resistance
  • Maximum peak current of 5000 A

BOLAB 100-TS Series | DC – 200 kHz, 400 W – 18000 W

  • DC to 200 kHz full range bandwidth
  • Rise time / fall time up to 100 V/µs
  • Arbitrary function with 1 Million memory data points

Amplifier Research CI00402 RF Conducted Immunity System

  • Fully self-contained state of the art system designed to test RF conducted immunity
  • The system contains a signal generator a spectrum analyzer a 100W nominal AR amplifier a 10 kHz to 400 MHz directional coupler emcware® control software
  • a signal generator

Com-Power CLCE-1032 RF Current Probe | 9 kHz – 1000 MHz

  • Frequency range of 9 kHz to 1000 MHz
  • Suitable for CISPR, MIL-STD-461, and DO-160
  • Individual calibration

Frankonia CIT-10 Compact Immunity Test System, 10 kHz - 400 MHz

  • Conducted RF immunity tests acc. to IEC/EN 61000-4-6 and BCI tests acc. to ISO 11452-4 and MIL–STD 461E
  • Signal generator, RF-power amplifier, RF-power meter and directional coupler (optional) in one 19”-case
  • Stand-alone operation possible with optional available netbook

AH Systems BCP-510 Broadband Current Probe | 20Hz - 1MHz

  • Measures currents on 50 Hz, 60 Hz and 400 Hz powerlines
  • Individually Calibrated (Transfer Impedance calibration included)
  • Split Type Clamp-on Design

EM Test CWS 500N3 Low Frequency Simulator 10 Hz - 250 kHz

Schwarzbeck CDN-AF2

  • Part of the coupling decoupling network series
  • For conducted common mode immunity testing according to IEC 61000-4-6
  • Frequency range of 0.15 - 230 MHz

Solar 9120-1N Injection Probe

  • Injection probe
  • Split toroidal design for easy clamping onto test wires
  • Calibrated for insertion loss and transfer impedance

AH Systems BCP-520 Broadband Current | 10kHz - 500MHz

  • Individually Calibrated (Transfer Impedance calibration included)
  • High current conducted emissions measurements without saturation
  • High Current Capability

Com-Power CDN-M125E Couplers Coaxial

  • Frequency Range - 150 kHz -230 MHz
  • Meets EN 61000-4-6 requirements
  • Current Rating: up to 25 Amps