Chroma 11210 Battery Cell Insulation Tester
- Built-in reliable contact check
- Automated test sequence: charge-dwell-measure-discharge
- High speed testing (20 ms/device)
Chroma 17011 Programmable Charge/Discharge ATS
- High-accuracy current output & measurement up to 0.02%
- Linear circuit design, low ripple current
- Long term stability suitable for life cycle testing
Chroma 17020 Regenerative Battery Pack ATS
- Regenerative Battery Energy Discharge Energy saving Environment protection Low heat output
- Energy saving
- Environment protection
Chroma 17030 Regenerative Battery Pack ATS
- Regenerative battery energy discharge Energy saving Environment protection Low heat output
- Energy saving
- Environment protection
Chroma 17040 Regenerative Battery Pack Test System
- Conforms to international standards for battery testing: IEC, ISO, UL, and GB/T, etc.
- Regenerative battery energy discharge (Eff. >90%, PF >0.95, I_THD <5%)
- 4 voltage and current ranges for auto ranging function to provide optimum resolution
Chroma 17040E | 1700 VDC, 200 kW – 1.2 MW
- Meets international standards for battery testing: IEC, ISO, UL, and GB/T, etc.
- Regenerative battery energy discharge
- Auto-ranges with multiple voltage and current ranges for optimal resolution
Chroma 62180D-1800 Bidirectional DC Power Supply
- Two-quadrant operation: source and load functions
- High power density: 18 kW in 3 U
- Easy master/slave parallel & series, 1 operation up to 180 kW
Megger Torkel 840 DC Battery Load Tester
- "In Service" batteries can be tested
- Load currents in the test parameters are included as the unit adjusts
- Adjustable alarm and shutdown points to prevent excessive discharge
NH Research 9200 Battery Test System
- Best configuration flexibility
- Custom waveform/profile generation
- Microsecond voltage, current, and mode transition times
NH Research 9210 Single Channel DC Test System | 40 V, 600 A or 600 V, 40 A
- Smaller footprint makes it easier to move within a lab (roughly half the size of the 9200)
- Custom waveform/profile generation
- Sub-mS voltage, current & mode transition times
Megger BGFT Battery Ground Fault Tester
- Digital display of voltage and current signal amplitudes
- Bridge measurement of fault resistance and system capacitance. (The use of the bridge is optional.)
- Wide fault resistance measurement range from 1 kΩ to 399 kΩ
Megger BGL Battery Ground-Fault Locator
- Locates ground faults on floating battery systems
- Operates on floating or resistance-grounded battery systems
- Multiple fault detection and tracking
DV Power BLU360V Battery Load Unit
Hioki BT3554 Battery HiTester
- Measure and save data in as fast as 2 seconds, a 60% improvement from the legacy 3554
- Instantaneously diagnose degradation (PASS, CAUTION FAIL) by measuring internal resistance and voltage
- Noise Reduction Technology improves noise resistance
Megger BVM300 Battery Voltage Monitor
- Automates battery voltage measurement during capacity tests
- "Daisy-chain" design allows expandability up to 120 units
- High accuracy and stability for precise data collection
Megger BVM600 Battery Voltage Monitor
- Automates battery voltage measurement during capacity tests
- "Daisy-chain" design allows expandability up to 120 units
- High accuracy and stability for precise data collection
Eagle Eye IBEX-1000 Portable Resistance Battery Tester
Eagle Eye IBEX-Pro Portable Resistance Battery Tester
Eagle Eye IBEX-Ultra Portable Resistance Battery Tester
Arbin LBT21024 Battery Tester | 8 Ch up to 10V, 100A
- 0-10 V
- 8-channel
- 100 A/25 A/5 A/500 mA
Megger BVM (Battery Voltage Monitor)
- Automates battery voltage measurement during capacity tests
- "Daisy-chain" design allows expandability up to 120 units
- High accuracy and stability for precise data collection
SOCTESTER SOC140 Battery Analyzer
- Simple to operate minimizing training time and eliminating end user error
- Enables quick decisions 20hr discharge results in less than a minute
- Unmatched accuracy, reliability and repeatability
Megger Torkel 820 12, 24, 48 Volt DC Battery Load Unit
- External measurement input used to measure current in an external path by means of a clamp-on ammeter or a current shunt.
- Alarm output equipped with a relay contact for triggering an external alarm device.
- Start/Stop input used for starting and stopping discharging from an external device. Galvanically isolated.
Megger Torkel 860 Battery Bank Load Tester
- Batteries can be tested "in service"
- Unit adjusts to include load currents in the test parameters
- User adjustable alarm and shutdown points to avoid excessive discharge
Megger TORKEL 900 Battery Load Unit
- Batteries can be tested in service
- Dynamic discharge technology – full power at all voltages
- Safety in all details, e.g. detection of blocked airflow
Megger Torkel 950 Battery Load Unit
- Display range: 0.0 to 2999.0 A
- Basic inaccuracy: ±(0.5% of reading +0.1 A)
- Resolution: 0.1 A
Megger TXL Extra Load Units for Torkel Test Systems
- Provide higher load currents for concurrent power tests
- Discharging process controlled by a TORKEL unit
- Connect directly to the battery under test