Keysight Streamline Series USB Vector Network Analyzers
- Get consistent technology, user interface, and automated code capabilities across bench, modular, and USB platforms
- Most compact VNA for easy sharing between test locations
- Wide choice of frequency ranges from 300 kHz up to 26.5 GHz
Keysight N9912A FieldFox 6 GHz Cable/Antenna Analyzer (Agilent FieldFox N9912A)
- Cable and antenna analyzer for return loss, one-port cable loss, distance to fault, line sweeping, and VSWR measurements
- Handheld network analyzer (S11, S21, phase, and Smith Chart)
- Handheld spectrum analyzer, optional preamplifier
Keysight N9000B CXA Signal Analyzer
- Frequency Options | 3, 7.5, 13.6, 26.5 GHz
- Max Analysis Bandwidth | 25 MHz
- DANL @1 GHz | -163 dBm
Rohde & Schwarz FSW Series Signal and Spectrum Analyzers
- Frequency range from 2 Hz to 8 /13.6 /26.5 /43.5 GHz
- Low phase noise of –137 dBc (1 Hz) at 10 kHz offset (1 GHz carrier)
- –88 dBc dynamic range (with noise cancellation) for WCDMA ACLR measurements
Tektronix RSA5106A Real-Time Spectrum Analyzer
- Frequency Range 1 Hz to 6.2 GHz.
- Trigger Modes: Free Run, Triggered, FastFrame.
- Level Range 0 dB to –100 dB from reference level.
Narda IDA 2 Interference and Direction Analyzer, Radio Direction Finder | 20 MHz - 6 GHz
- Extremely fast sweep at 12 GHz/s
- Real-time bandwidths up to 32 MHz for recording short duration signals
- Direction Finding mode with automatic azimuth determination
Keysight E5071C ENA Vector Network Analyzer, 9 kHz - 20 GHz
- Wide frequency coverage: 9 kHz to 20 GHz
- Low trace noise: <0.004 dB rms at 70 kHz IFBW
- Wide dynamic range: >123 dB
Keysight N5221B PNA Microwave Network Analyzer 10 MHz to 13.5 GHz
- PNA Network analyzer software tools for investigating, characterizing & troubleshooting designs
- Advanced Design System (ADS): complete, integrated set of fast and accurate circuit & system simulators
- Configurable test set
Anritsu ShockLine MS46131A | 1 MHz – 43.5 GHz
- 1-port VNA with frequency options from 1 MHz to 8 GHz / 20 GHz / 43.5 GHz
- Guaranteed performance to 43.5 GHz with Extended-KTM ports
- PC control takes advantage of external computer processing power and functionality
Rohde & Schwarz FSL Series | 9 kHz – 3/6/18GHz
- Frequency range 9 kHz to 3 GHz, 6 GHz or 18 GHz
- Models with and without tracking generator
- Signal analysis bandwidth of 28 MHz
Rohde & Schwarz FSH18 10 MHz - 18 GHz Spectrum Analyzer
- Frequency range of 10 MHz to 18 GHz
- Reference Level -80dBm to +20dBm
- TOI typ. 7 dBm
Keysight 8753E RF Network Analyzer, 30 kHz - 3/6 GHz
- 30 kHz to 3 or 6 GHz frequency range
- Integrated S-parameter test set with solid-state switching
- Up to 110 dB dynamic range
Anritsu MS2038C VNA Master & Spectrum Analyzer | 5 kHz to 20 GHz
- 2-port, 2-path, fully-reversing VNA
- S-parameters measured with a single connection
- 350 μsec per data point
Keysight N9320B RF Spectrum Analyzer | 9 kHz - 3 GHz
- Minimum non-zero span sweep time: < 10 ms
- Resolving power RBW: 10 Hz to 1 MHz
- Sensitivity DANL: -130 dBm, -148 dBm with preamp on
Tektronix RSA306 USB Real Time Spectrum Analyzer
- 9 kHz to 6.2 GHz frequency range
- ACER Laptop with pre-installed SignalVU-PC software included
- +20 dBm to -160 dBm measurement range
Keysight 35670A FFT Dynamic Signal Analyzer, DC-102.4 kHz
- 102.4 kHz at 1 channel, 51.2 kHz at 2 channel, 25.6 kHz at 4 channel
- 100, 200, 400, 800 and 1600 lines of resolution
- 90 dB dynamic range, 130 dB in swept-sine mode
Keysight E7402A EMC Spectrum Analyzer | 30 Hz – 3.0 GHz
- 9 kHz to 3.0 GHz (30 Hz to 9 kHz with UKB option)
- Automatic EMI measurements
- Log sweep
Anritsu MS2080A RF Spectrum Analyzer
- Real-Time Spectrum Analyzer (RTSA)
- Interference Analyzer
- True Power Meter
Rohde & Schwarz FSMR Measuring Receiver 20 Hz - 50 GHz
- Frequency range from 20 Hz to 3/26.5/43/50 GHz
- Highly accurate level calibrator with wide measurement range from +30 dBm to –140 dBm
- Highly accurate level calibrator
Keysight N9342C Handheld Spectrum Analyzer (HSA), 7 GHz
- AM/FM Tune and Listen
- Analog Demodulation
- Field Strength Measurement
Keysight E4440A PSA Spectrum Analyzer | 3 Hz - 26.5 GHz
- All-digital IF with auto-ranging capability
- Phase noise optimization
- Full detector suite
Keysight 85093C RF Electronic Calibration (ECal) Module | 3.5mm
- 300 kHz to 9 GHz frequency range
- Fast full two-port calibration with a single connection
- Simple non-insertable device calibration
Keysight N5249A PNA-X Microwave Network Analyzer
- Simple user interface for full control of pulse modulators, generators, and point-in-pulse measurements
- Point-in-pulse measurements with 20 ns minimum pulse width
- Improved measurement speed and accuracy for narrowband detection via hardware filters and patented spectral-nulling and software IF-gating techniques
Anritsu MS46522B ShockLine 2-Port Performance VNA
- High output power allows measurement of high attenuation devices
- Advanced time domain option provides tools for signal integrity (SI) analysis
- Industry leading dynamic range enables measurement of very low reflection artifacts
Keysight N9020A MXA Signal Analyzer
- 20 Hz to 3.6 , 8.4, 13. 6, or 26.5 GHz
- Up to 300% faster than other mid-performance class spectrum and signal analyzers, ships standard with 160 GB removable hard drive
- Analog baseband IQ inputs with 40 MHz baseband bandwidth (optional)