The E5071B ENA RF Network Analyzer dramatically improves measurement accuracy and responds to current and future test needs. Because it performs up to 125 dB 2 wide dynamic range at 10 Hz IFBW, the sweep speed can be faster at the required dynamic range. The trace noise is lowered to 0.001 dB rms at 3 kHz IFBW. It delivers accurate pass band ripple measurement of a filter. The ENAs excellent measurement performance improves test quality and repeatability as well as test throughput, which affect production yield and the overall cost of test.
The E5071B ENA RF Network Analyzer perform fast and accurate RF component measurements for both R&D evaluations and production testing. The E5071B (300 kHz to 8.5 GHz) model offers integrated 2, 3, or 4 test ports, and enable various component measurements from 2-port filters to multiport devices like duplexers and couplers. The ENA offers built-in balanced measurements, matching circuit simulation, and port characteristic impedance conversion. In addition, the ENA provides frequency-offset and harmonics measurement capabilities. These functions increase engineering efficiency by delivering fast and accurate measurement results for the most advanced RF components, such as balanced SAW filters, differential amplifiers, mixers, converters, and front-end modules. The Keysight E5071B ENA RF Network Analyzer was previously manufactured as the Agilent E5071B ENA Series RF Network Analyzer.
Features
- Fast multiport measurements: 9.6 µs/point
- High accuracy 125dB dynamic range1 and 0.001 dB rms trace
- Integrated 2, 3, or 4 test ports
- Full-port SOLT and TRL/LRM calibration
- Built-in balanced measurement and fixture simulator
- Time domain analysis with gating
- Mixer evaluation with advanced mixer calibration techniques
- Up to 9 ports using the multiport test set
- 4-port electronic calibration (ECal) support
- Bundled Microsoft® Visual Basic® for Applications (VBA)
Specifications
| Test Frequency |
300 kHz to 8.5 GHz |
| Max port output power |
-50 to 10 dBm |
| Test set |
S-parameter test set |
| Number of test ports |
2 |
3 |
4 |
| Measurement parameters with balanced conversion |
S11 - S22 |
S11 - S33 |
S11 - S44 |
| Mixed mode S-parameter, amplitude/phase imbalance |
| Number of points |
2 to 1601 |
| Typical system dynamic range |
120 dB to 10 Hz BW (3 MHz to 1.5 GHz)
122 dB to 10 Hz BW (1.5 MHz to 3 GHz)
121 dB to 10 Hz BW (3 MHz to 4 GHz)
117 dB to 10 Hz BW (4 MHz to 6 GHz)
112 dB to 10 Hz BW (6 MHz to 7.5 GHz)
105 dB to 10 Hz BW (7.5 MHz to 8.5 GHz)
(Response & isolation calibration) |
| Trace noise (magnitude) |
0.001 dBrms at 3 kHz BW (3 MHz to 3 GHz)
0.0012 dBrms at 3 kHz BW (3 GHz to 4.25 GHz)
0.0036 dBrms at 3 kHz BW (4.25 GHz to 7.5 GHz)
0.006 dBrms at 3 kHz BW (7.5 GHz to 8.5 GHz)
(0 dBm source power, through measurement) |