Aaronia 60100 HyperLOG Directional Antenna
- HyperLOG log-periodic antenna
- Frequency range of 680 MHz to 10 GHz
- For both work out in the field and in a lab
Aaronia Spectran HF 60105 V4 Spectrum Analyzer
- Frequency range of 1MHz to 9.4GHz
- Real-time remote control via USB
- Exposure limits with percentage display
Tektronix 2714 Cable TV Spectrum Analyzer
- Built-in Automatic Cable TV Measurements
- Addresses all Field FCC Proof-of-Performance Requirements
- Quick-change 75 ohm F and BNC Input Connectors
Keithley 2820 RF Vector Signal Analyzer 6 GHz
- 400MHz to 6GHz frequency range
- –146dBm to +35dBm measurement range
- 40MHz signal bandwidth
Aeroflex IFR 3250 Series Spectrum Analyzer 1 kHz - 26.5 GHz
- Powerful RF performance, phase noise - 115 dBc/Hz, DANL -145 dBm/Hz
- Vector analyzer with 30 MHz I/Q demodulation bandwidth
- Measurement personality options including GSM/EDGE, UMTS, CDMA2000/1xEVDO, WLAN and WiMAX
Keysight 3561A Dynamic Signal Analyzer
- Horizontal: Hz, seconds, RPM, orders; linear, or log spacing
- Vertical: dBV, dBm (selectable Z), volts, volts squared, and user-defined units.
- Spectrum and network analysis, waveform recording, 1/3 and 1/1 octave analysis
Keysight 3562A Dual-Channel, Dynamic Signal Analyzer 100 kHz
- Measurement Range: 64 µHz to 100 kHz. Both channels, single- or dual-channel operation
- Resolution: span/800
Keysight 35650A Dynamic Signal Analyzer System
- Full Scale Voltage Range: 1.26mVp to 39.8 Vp
- Full Scale Charge Range: -18 dBpCp to +72 dBpCp
- Effective Sample Rates: from 0.5Hz to 262kHz
Keysight 35660A Dual-Channel Dynamic Signal Analyzer
- Frequency range Channel 1: 488µHz to 102.4kHz, single channel mode Channel 1 and 2: 244µHz to 51.2kHz, dual channel mode
- Accuracy: ± 0.003% of frequency reading
- Resolution: Span/400
Keysight 35665A Dynamic Signal Analyzer
- 1-channel at 102.4 kHz, 2 channels at 51.2 kHz
- 100, 200, 400, 800 lines of resolution
- Built in 3.5" floppy disk
Keysight 35670A FFT Dynamic Signal Analyzer, DC-102.4 kHz
- 102.4 kHz at 1 channel, 51.2 kHz at 2 channel, 25.6 kHz at 4 channel
- 100, 200, 400, 800 and 1600 lines of resolution
- 90 dB dynamic range, 130 dB in swept-sine mode
Keysight 3582A Spectrum Analyzer, 0.02 Hz to 25.599 kHz
- Transfer function magnitude and phase measurements
- Coherence function measurement
- Phase spectrum measurement
Keysight 3585A Spectrum Analyzer, 20Hz - 40MHz
- Measurement Range: 20 Hz to 40.1 MHz
- Displayed Frequency Span - Range: 0 Hz to 40.1 MHz
- Displayed Center, Start/Stop, and Manual Frequency - Range: 0 Hz to 40.1 MHz
Keysight 3585B Spectrum Analyzer
- Sweep gating option
- 80 to 100 dB dynamic range
- +0.25 dB typical level accuracy
Keysight 4195A Network Spectrum Analyzer
- Source Source Frequency: 10Hz to 500MHz Power: -50dBm to +15dBm Receiver Input: 4 inputs, 50 ohms nominal Resolution Bandwidth: 3Hz to 300kHz, 1 or 3 step Magnitude Ratio Dynamic
- Source Frequency: 10Hz to 500MHz
- Power: -50dBm to +15dBm
Keysight 853A Spectrum Analyzer Display Mainframe
- Rugged portability
- Simple three-knob operation
- Direct plotter control
Keysight 8560A Portable Spectrum Analyzer
- Frequency Range: 50 Hz to 2.9 GHz
- Counter Resolution: 1 Hz - 1MHz (selectable)
- Frequency Span Range: 0 Hz, 100 Hz to 2.9 GHz over the 10-division CRT horizontal axis, variable in approximately 1% increments, or in a 1, 2, 5 sequence
Keysight 8560EC Portable Spectrum Analyzer
- Fast digital resolution bandwidths of 1 Hz to 3 MHz
- Portable, MIL-PRF-28800, Class 3 rugged
Keysight 8561EC Spectrum Analyzer, 30 Hz-6.5 GHz
- Continuous 30 Hz to 6.5 GHz sweep
- Fast digital resolution bandwidths of 1, 3, 10, 30 and 100 Hz
- Adjacent channel power, channel power, carrier power, occupied bandwidth percentage and time-gated measurements
Keysight 8562A Spectrum Analyzer, 9kHz - 22GHz
- Frequency Range: 1 kHz to 22 GHz (extendable to 26.5 with Option 026)
- Counter Resolution: 10 Hz - 1MHz (selectable)
Keysight 8562B 9 kHz - 22 GHz Spectrum Analyzer
- Frequency Range: 9 kHz to 22 GHz (extendable to 26.5 GHz with Option 026 and 325 GHz with external mixing)
- Counter Resolution: 10 Hz - 1MHz (selectable)
- Frequency Span Range: 0 Hz-2.5kHz x N
Keysight 8563E 30 Hz/9 kHz - 26.5 GHz Spectrum Analyzer
- Continuous 30 Hz - 26.5 GHz sweep
- Fast digital resolution bandwidths of 1, 3, 10, 30 and 100 Hz
- Adjacent channel power, channel power, carrier power, occupied bandwidth percentage and time-gated measurements standard
Keysight 8563EC 9 kHz - 26.5 GHz Portable Spectrum Analyzer
- Outstanding performance for sensitivity, phase noise, the 2nd and 3rd order dynamic range, and the voltage standing wave ratio (VSWR)
- Color display
- Continuous 30 Hz to 26.5 GHz sweep
Keysight 8564E 40 GHz Spectrum Analyzer
- Continuous 30 Hz to 40 GHz sweep
- Fast digital resolution bandwidths of 1, 3, 10, 30 and 100 Hz
- Adjacent channel power, channel power, carrier power, occupied bandwidth percentage and time-gated measurements standard
Keysight 8564EC 9 kHz - 40 GHz Spectrum Analyzer
- Fast digital resolution bandwidths of 1 Hz to 3 MHz
- Portable, MIL-PRF-28800, Class 3 rugged
- Easily transfer screen image or trace data to PC with BenchLink software E4444A BenchLink software
Keysight 8565E 50 GHz Spectrum Analyzer
- Continuous 30 Hz to 50 GHz sweep
- Fast digital resolution bandwidths of 1, 3, 10, 30 and 100 Hz
- Adjacent channel power, channel power, carrier power, occupied bandwidth percentage and time-gated measurements standard
Keysight 8565EC 9 kHz - 50 GHz Spectrum Analyzer
- Outstanding performance for sensitivity, phase noise, the 2nd and 3rd order dynamic range, and the voltage standing wave ratio (VSWR)
- Color Display
- Continuous 9 kHz to 50 GHz sweep (to 325 GHz with external mixing)
Keysight 8566B 100 Hz - 22 GHz Laboratory Spectrum Analyzer
Keysight 8568B Spectrum Analyzer
- Frequency Range: 100Hz-1500MHz DC coupled 100kHz-1500MHz AC coupled 20Hz to 2GHz with RF Preselector (to 18 GHz with RFP bypass)
- 100Hz-1500MHz DC coupled
- 100kHz-1500MHz AC coupled
Keysight 8569A Spectrum Analyzer
Keysight 8590A 10 kHz - 1.5 GHz Spectrum Analyzer
- Frequency Range: 10 kHz to 1.5 GHz (extendable to 1.8 GHz with Option H18)
- Readout Accuracy: ± (5 MHz + 1% of frequency span)
- Span Range: 0 Hz & 50 kHz to 1.8 GHz with 4-digit resolution
Keysight 8590B 50/75 Ohm 9 kHz - 1.8 GHz Spectrum Analyzer
- Frequency Range: 9 kHz to 1.8 GHz
- Readout Accuracy: ± (5 MHz + 1% of frequency span)
- Span Range: 0 Hz, 50 kHz to 1.8 GHz
Keysight 8591C Cable TV Analyzer, 1 MHz - 1.8 GHz
- 75 Ω input impedance
- Precision frequency reference
- Protective soft yellow carrying case
Keysight 8593E Spectrum Analyzer
Keysight 8594E Spectrum Analyzer, 9 kHz - 2.9 GHz
- Perform complex tests simply and quickly with measurement personalities that support applications like cable TV/broadcast, component test, electromagnetic compatibility, lightwave, and wireless
- Four slot cardcage
- Split screen display
Keysight 8595A RF Spectrum Analyzer, 9 kHz - 6.5 GHz
Keysight 8595E-41 Spectrum Analyzer, 9 kHz to 6.5 GHz
- Perform complex tests simply and quickly with measurement personalities that support applications like cable TV/broadcast, component test, electromagnetic compatibility, lightwave, and wireless
- Four slot cardcage
- Split screen display
Keysight 8901A Modulation Analyzer 150 kHz - 1300 MHz
- Measures AM and FM to 1% accuracy
- Measures RF frequency
- Measures RF power
Keysight 89441A Vector Signal Analyzer
- High-performance spectrum analysis
- Advanced, optimized time-gated spectrum analysis
- Vector modulation analysis (optional)
Anritsu MS2038C VNA Master & Spectrum Analyzer | 5 kHz to 20 GHz
- 2-port, 2-path, fully-reversing VNA
- S-parameters measured with a single connection
- 350 μsec per data point
Viavi CA5000 CellAdvisor 5G Cell Site Analyzer
- Auto file naming that eliminates manual inputs in file name
- Trace overlay that detects signal degradation over time
- Dual display and multiple tabs that allow fast and efficient measurements
Keysight E4401B ESA-E Series Spectrum Analyzer
- Noise Figure Measurement Personality
- Remotely view and control the ESA over the Internet
- 8590-series programming code compatibility
Keysight E4402B Spectrum Analyzer
- 0.4 dB overall amplitude accuracy
- 1 Hz to 5 MHz Resolution Bandwidth (RBW)
- +16 dBm third order intercept (TOI)
Keysight E4403B ESA-L Basic Analyzer, 9kHz - 3.0GHz
- 1.1 dB overall amplitude accuracy
- 100 Hz to 5 MHz RBW, 100 Hz to 300 Hz optional
- +7.5 dBm TOI
Keysight E4404B ESA-E Spectrum Analyzer
- Large high-resolution, high-contrast color display
- Flexible hardware/software environment
- Built-in floppy disk
Keysight E4405B Spectrum Analyzer, 9 kHz - 13.2 GHz
- Noise figure measurement personality
- Remotely view and control the ESA over the Internet
- 8590-series programming code compatibility
Keysight E4406A RF Vector Signal Analyzer (VSA)
Keysight E4407B Spectrum Analyzer | 9k-26.5GHz
- Noise figure measurement personality
- Remotely view and control the ESA over the Internet
- 8590-series programming code compatibility
Keysight E4408B 9 kHz - 26.5 GHz, ESA-L Standard Spectrum Analyzer
- 1.1 dB overall amplitude accuracy
- 100 Hz to 5 MHz RBW, 100 Hz to 300 Hz optional
- +7.5 dBm TOI
Keysight ESA-L1500A/E4411A Portable Spectrum Analyzer 1.5GHz
- Frequency range 9 kHz to 1.5 GHz with frequency accuracy of ±2.0 kHz at 1 GHz (without temperature)
- Phase noise <= -90 dBc/Hz (10 kHz offset) and residual FM <=100 Hz P-P
- Resolution bandwidths 1 kHz to 3 MHz
Keysight E4440A PSA Spectrum Analyzer | 3 Hz - 26.5 GHz
- All-digital IF with auto-ranging capability
- Phase noise optimization
- Full detector suite
Keysight E4443A PSA Spectrum Analyzer, 3 Hz - 6.7 GHz
- Performance +/-0.19 dB absolute amplitude accuracy -155 dBm (-168 dBm w/preamp) displayed average noise level (DANL) -118 dBc/Hz phase noise at 10 kHz offset 81 dB W-CDMA ACLR
- +/-0.19 dB absolute amplitude accuracy
- -155 dBm (-168 dBm w/preamp) displayed average noise level (DANL)
Keysight E4446A PSA Series Spectrum Analyzer | 3 Hz - 44 GHz
- Optional 40 or 80 MHz analysis bandwidth to capture and measure complex signals
- -78 dB (nominal) third order intermodulation for 40 or 80 MHz analysis bandwidth
- Up to 300 MHz analysis bandwidth for calibrated VSA measurements
Keysight E4448A PSA Spectrum Analyzer, 3 Hz – 50 GHz
- +/-0.19 dB absolute amplitude accuracy
- -154 dBm displayed average noise level (DANL)
- -118 dBc/Hz phase noise at 10 kHz offset
Keysight E7402A EMC Spectrum Analyzer | 30 Hz – 3.0 GHz
- 9 kHz to 3.0 GHz (30 Hz to 9 kHz with UKB option)
- Automatic EMI measurements
- Log sweep
Keysight E7405A | 9 kHz – 26.5 GHz
- 1 Hz to 5 MHz (including 200 Hz, 9 kHz, 120 kHz, 1 MHz EMI BW)
- +12.5 dBm TOI
- ≤150 dBm displayed average noise level (DANL)
Rohde & Schwarz EB500 | 8 kHz – 6 GHz
- ITU-compliant measurements and applications for security authorities and organizations
- Wide frequency range: 8 kHz to 6 GHz (base unit: 20 MHz to 3.6 GHz)
- 20 MHz real-time bandwidth
Rohde & Schwarz ETL TV Analyzer
- Frequency range from 500 kHz to 3 GHz
- TV, FM (radio), video, audio, MPEG-2 transport stream and spectrum analysis in a single box
- FPGA and chip-based realtime demodulators for analog
Rohde & Schwarz Spectrum Rider FPH Handheld Spectrum Analyzer Series
- Handheld spectrum analyzer series
- Replacement for the FSH Series
- Maximum frequency of 44 GHz
Rohde & Schwarz FPL1007 Spectrum Analyzer
- Lightweight with small footprint
- Gated sweep, narrowband resolution filters and spectrogram measurements as standard
- One instrument for multiple applications
Rohde & Schwarz FPS Signal and Spectrum Analyzer 10 Hz - 40 GHz
- Frequency range up to 4/7/13.6/30/40 GHz
- Up to 160 MHz signal analysis bandwidth
- 0.4 dB level measurement uncertainty up to 7 GHz
Rohde & Schwarz FSEA20 Spectrum Analyzer
- Combines the following functions: spectrum analysis and analysis of digitally modulated signals (option)
- Spectrum analysis with maximum dynamic range
- Adaptation of all models to your specific requirements by means of a wide range of options. Easy upgrading of basic models into top-class models
Rohde & Schwarz FSEM20 9 kHz to 26.5 GHz Spectrum Analyzer
- Spectrum Analysis with Ultra-wide Dynamic Range, 9 kHz to 26.5 GHz
- Universal Analysis of Digital and Analog Modulated Signals (option)
- BPSK, QPSK, pi/4-DQPSK, QAM, MSK, GMSK, AM, FM, PM
Rohde & Schwarz FSG Spectrum Analyzer
- Frequency range: 9 kHz to 8 GHz, 13.6 GHz
- 28 MHz demodulation bandwidth
- 4 Msample I and Q memory
Rohde & Schwarz FSH Series Handheld Spectrum Analyzers
- Robust edge protection stable carrying handle
- Easy operation
- Four hours operating time on battery power
Rohde & Schwarz FSH18 10 MHz - 18 GHz Spectrum Analyzer
Rohde & Schwarz FSH20 Spectrum Analyzer 9 kHz - 20 GHz
- Frequency range from 9 kHz to 20 GHz
- High sensitivity (< –141 dBm (1 Hz), with preamplifier < –161 dBm (1 Hz))
- 20 MHz demodulation bandwidth for analyzing LTE signals
Rohde & Schwarz FSH3 100 kHz to 3 GHz, Handheld Spectrum Analyzer
Rohde & Schwarz FSH313 Handheld Spectrum Analyzer w/ Tracking Generator
Rohde & Schwarz FSH6 6 GHz Handheld Spectrum Analyzer
Rohde & Schwarz FSH8 Spectrum Analyzer 9 kHz - 8 GHz
- Frequency range from 9 kHz to 20 GHz
- High sensitivity (< –141 dBm (1 Hz), with preamplifier < –161 dBm (1 Hz))
- 20 MHz demodulation bandwidth for analyzing LTE signals
Rohde & Schwarz FSL Series | 9 kHz – 3/6/18GHz
- Frequency range 9 kHz to 3 GHz, 6 GHz or 18 GHz
- Models with and without tracking generator
- Signal analysis bandwidth of 28 MHz
Rohde & Schwarz FSL18 Spectrum Analyzer | 9 kHz - 18 GHz
- Frequency range 9 kHz to 18 GHz (20 GHz overrange) with and without tracking generator
- Best RF characteristics in its class
- Largest signal analysis bandwidth in its class (28 MHz)
Rohde & Schwarz FSL3 Spectrum Analyzer | 9 kHz - 3 GHz
- Frequency range 9 kHz to 3 GHz with and without tracking generator
- Best RF characteristics in its class
- Largest signal analysis bandwidth in its class (28 MHz)
Rohde & Schwarz FSL313 Spectrum Analyzer | 9 kHz - 3 GHz
- Frequency range 9 kHz to 3 GHz with tracking generator
- Best RF characteristics in its class
- Largest signal analysis bandwidth in its class (28 MHz)
Rohde & Schwarz FSL6 | 9 kHz – 6 GHz
- Frequency range 9 kHz to 6 GHz
- 6 GHz model with and without tracking generator
- Best RF characteristics in its class
Rohde & Schwarz FSMR Measuring Receiver 20 Hz - 50 GHz
- Frequency range from 20 Hz to 3/26.5/43/50 GHz
- Highly accurate level calibrator with wide measurement range from +30 dBm to –140 dBm
- Highly accurate level calibrator
Rohde & Schwarz FSP Spectrum Analyzers
- Frequency range 9 kHz to 3GHz, 7 GHz, 13 GHz, 30 GHz and 40 GHz
- Resolution bandwidth 1 Hz to 10 MHz
- Displayed average noise level -155 dBm (1 Hz)
Rohde & Schwarz FSP13 Spectrum Analyzer 13 GHz
- Frequency range 9 kHz to 13 GHz
- Resolution bandwidth 1 Hz to 10 MHz
- Displayed average noise level -155 dBm (1 Hz)
Rohde & Schwarz FSP30 Spectrum Analyzer 30 GHz
- Frequency range 9 kHz to 30 GHz
- Resolution bandwidth 1 Hz to 10 MHz
- Displayed average noise level -155 dBm (1 Hz)
Rohde & Schwarz FSP38 Spectrum Analyzer | 9 kHz - 40 GHz
- 15 minutes warm-up time at ambient temperature
- specified environmental conditions met, calibration cycle and total calibration
- Data without tolerances: typical values only
Rohde & Schwarz FSP7 Spectrum Analyzer | 9 kHz - 7 GHz
- Frequency range 9 kHz to 7 GHz
- Resolution bandwidth 1 Hz to 10 MHz
- Displayed average noise level -155 dBm (1 Hz)
Rohde & Schwarz FSPN26 Phase Noise Analyzer & VCO Tester
- Pure phase noise analyzer and VCO tester with high measurement speed
- Simultaneous measurement of phase noise and amplitude noise
- Frequency range from 1 MHz to 50 GHz
Rohde & Schwarz FSU Spectrum Analyzer 20 Hz - 67 GHz
- 3.6/8/26/43/46/50/67 GHz
- TOI > 20 dBm, typ. +25 dBm
- 1 dB compression: +13 dBm (0 dB RF attenuation)
Rohde & Schwarz FSV Signal & Spectrum Analyzer
- Frequency range up to 4/7/13.6/30/40 GHz
- Convenient, intuitive operation with touchscreen based user interface 5 GHz
- 0.4 dB level measurement uncertainty up to 7 GHz
Rohde & Schwarz FSVR Real-Time Spectrum Analyzer
- Frequency range from 10 Hz to 7 GHz, 13.6 GHz, 30 GHz or 40 GHz
- 40 MHz real-time analysis bandwidth
- Triggering on frequency masks
Rohde & Schwarz FSW Series Signal and Spectrum Analyzers
- Frequency range from 2 Hz to 8 /13.6 /26.5 /43.5 GHz
- Low phase noise of –137 dBc (1 Hz) at 10 kHz offset (1 GHz carrier)
- –88 dBc dynamic range (with noise cancellation) for WCDMA ACLR measurements
Rohde & Schwarz FSWP Phase Noise Analyzer and VCO Tester
- Frequency range from 1 MHz to 8/26.5/50 GHz
- High sensitivity for phase noise measurements thanks to cross‑correlation and extremely low‑noise internal reference sources
- Simultaneous measurement of amplitude noise and phase noise
Rohde & Schwarz HE 100 Active Directional Antenna | 20 MHz - 1 GHz
- Unambiguous determination of direction of incidence
- Distinct directional pattern
- Antenna voltage maximum as direction criterion (maximum-signal DF method)
Rohde & Schwarz HE300 Active Directional Antenna
- Unambiguous radiation pattern
- Direction finding by orienting antenna toward maximum field strength
- Very wideband performance in a compact size
Narda IDA 2 Interference and Direction Analyzer, Radio Direction Finder | 20 MHz - 6 GHz
- Extremely fast sweep at 12 GHz/s
- Real-time bandwidths up to 32 MHz for recording short duration signals
- Direction Finding mode with automatic azimuth determination
Anritsu MA2700A Handheld InterferenceHunter
- Handheld direction finding system
- Includes GPS and electronic compass
- Bandwidth of 9 kHz to 6 GHz
Anritsu MS2034B VNA Master Vector Network Analyzer
- Frequency range of 9 kHz to 4 GHz
- Includes a powerful spectrum analyzer
- Ideal for making fast and reliable measurements in the field
Anritsu MS2035B VNA Master Vector Network Analyzer
- Frequency range of 9 kHz to 6 GHz
- Includes a powerful spectrum analyzer
- Ideal for making fast and reliable measurements in the field
Anritsu MS2080A RF Spectrum Analyzer
- Real-Time Spectrum Analyzer (RTSA)
- Interference Analyzer
- True Power Meter
Anritsu Field Master Pro MS2090A
- 10.1 inch, 1280 x 800 color touchscreen display
- Gated sweep for timed gated spectrum measurements
- Complex limit lines with pass/fail
Anritsu MS2601A/MH680A1 Spectrum Analyzer
Anritsu MS2623A Spectrum Analyzer, 9 kHz - 6.5 GHz
Anritsu MS2702A Spectrum Analyzer 100 Hz to 24.5 GHz
Anritsu MS2711 Spectrum Analyzer Power Monitor 100 kHz - 3 GHz
- Lightweight (4.0 lbs)
- Synthesized-based performance
- Full range of marker capabilities including peak, center, and delta functions
Anritsu MS2712E 100kHz to 4GHz Spectrum Analyzer
- Spectrum Analyzer, Interference Analyzer with Interference Mapping
- High Accuracy Power Meter, 2-port Transmission Measurements
- Coverage Mapping, Channel Scanner, GPS, AM/FM/PM Analyzer
Anritsu MS2713E Handheld Spectrum Analyzer
- Spectrum Analyzer: 9 kHz – 6 GHz
- Interference Analyzer with Interference Mapping
- High Accuracy Power Meter, 2-port Transmission Measurements
Anritsu MS2721A Handheld Spectrum Master
- 10 Hz to 3 MHz RBW range
- Very low phase noise (–100 dBc/Hz maximum at 10 kHz offset at 7.1 GHz)
- Built-in preamplifier
Anritsu MS2721B Spectrum Analyzer, 9 kHz - 7.1 GHz
- Handheld, battery-operated design
- Large daylight viewable transflective color display
- Built in pre-amplifier (standard)
Anritsu MS2723C High Performance Handheld Spectrum Analyzer
- Frequency Coverage - 9 kHz to 13 GHz
- Broadband preamplifiers over the whole frequency range for increased sensitivity around 20 dB
- Three Sweep Modes – with improved Sweep Speed - up to 100 times faster
Anritsu MS2724C Spectrum Master Handheld Spectrum Analyzer
- LTE, TD-LTE
- GSM/EDGE
- W-CDMA/HSPA+
Anritsu MS2726C Handheld Spectrum Analyzer
- Measure occupied bandwidth, channel power, ACPR, and C/I
- Dynamic Range of >104 dB in 1 Hz RBW
- Phase Noise of –100 dBc/Hz @ 10 kHz offset at 1 GHz
Anritsu MS2760A Spectrum Master | Ultraportable Spectrum Analyzer | 9 kHz – 110 GHz
- mmWave capabilities for 5G, wireless backhaul, 802.11ad, satcom, and more
- Ultra-portable form factor enables measurements right at the device under test
- Measure: channel power, adjacent channel power, occupied bandwidth
Anritsu MS2830A Signal Analyzer
Anritsu MS2840A-040 Spectrum Analyzer/Signal Analyzer
- Frequency range of 9 kHz to 3.6 GHz; 44.5 GHz max. built-in preamp option
- Best close-in phase noise performance in middle range signal analyzer/spectrum analyzer: –138 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency, meas.) –140 dBc/Hz (at
- –138 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency, meas.)
Anritsu MS2840A-041 Spectrum Analyzer/Signal Analyzer
- Frequency range of 9 kHz to 6 GHz; 44.5 GHz max. built-in preamp option
- Best close-in phase noise performance in middle range signal analyzer/spectrum analyzer: –138 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency, meas.) –140 dBc/Hz (at
- –138 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency, meas.)
Anritsu MS2840A Series Spectrum Analyzers/Signal Analyzers
- Frequency range of 9 kHz to 3.6 GHz/6 GHz/26.5 GHz/44.5 GHz (depending on model number); 44.5 GHz max. built-in preamp option
- Best close-in phase noise performance in middle range signal analyzer/spectrum analyzer: –123 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency with all frequency
- –123 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency with all frequency models)
Anritsu MS2850A Spectrum Analyzer / Signal Analyzer
- 5G measurement software built-in
- High EVM performance due to wide dynamic range (EVM: <1%)
- Multicarrier batch (all-at-once) analysis
Anritsu MS710D Spectrum Analyzer
- Internal preselector
- Full range of trace data processing functions
- CRT display of all function parameters
Anritsu BTS Master MT8222A
Keysight N1996A-506 CSA Spectrum Analyzer, 100 kHz - 6 GHz
- 1 dB electronic step input attenuator
- 10 Hz to 5 MHz RBW standard, 10% adjustable
- to 200 kHz, 1 Hz to 50 MHz VBW USB and LAN standard
Keysight N9000A CXA Signal Analyzer
- 9 kHz to 3, 7.5, 13.6 or 26.5 GHz; internal preamplifier options up to 26.5 GHz
- 10 MHz (standard), 25 MHz (optional) analysis bandwidth
- Optional built-in tracking generator 3 or 6 GHz (up to 7.5 GHz models)
Keysight N9000B CXA Signal Analyzer, Multi-touch, 9 kHz to 26.5 GHz
- 89600 VSA Software
- Analog Demodulation
- MATLAB
Keysight N9010A EXA Signal Analyzer
- 10 Hz to 3.6, 7, 13.6, 26.5, 32 or 44 GHz; internal preamplifier options up to 44 GHz
- 25 MHz (standard) analysis bandwidth; optional 40 MHz analysis bandwidth
- Fast sweep capability ships standard with new instruments (requires Option B40 or DP2 or MPB)
Keysight N9010B EXA Signal Analyzer, Multi-touch, 10 Hz to 44 GHz
- 89600 VSA Software
- Analog Demodulation
- MATLAB
Keysight N9020A MXA Signal Analyzer
- 20 Hz to 3.6 , 8.4, 13. 6, or 26.5 GHz
- Up to 300% faster than other mid-performance class spectrum and signal analyzers, ships standard with 160 GB removable hard drive
- Analog baseband IQ inputs with 40 MHz baseband bandwidth (optional)
Keysight N9020B MXA Signal Analyzer, Multi-touch, 10 Hz to 26.5 GHz
- 89600 VSA Software
- Analog Demodulation
- MATLAB
Keysight N9030A PXA Signal Analyzer (Formerly Agilent N9030A)
- 3 Hz to 3.6, 8.4, 13.6, 26.5, 43, 44, or 50 GHz; internal preamplifier options up to 50 GHz
- 10 MHz (standard), 25, 40, or 160 MHz analysis bandwidth
- Extend frequency to 325 GHz and beyond with external mixing
Keysight N9030B PXA Signal Analyzer, Multi-Touch, 3 Hz to 50 GHz
- 89600 VSA Software
- Analog Demodulation
- MATLAB
Keysight N9032B PXA Signal Analyzer | 2 Hz to 50 GHz
- Ready-to-use PathWave X-Series measurement applications and PathWave 89600 vector signal analysis software to ensure standards compliance and more
- Up to 2 GHz bandwidth option available on all models
- Superior spur searching speed with industry-best swept DANL
Keysight N9040B UXA Signal Analyzer, 2 Hz - 50 GHz
- Frequency range of 2 Hz to 50 GHz w/ options
- 1 GHz maximum analysis bandwidth
- 78 dBc spurious-free dynamic range
Keysight N9320A RF Spectrum Analyzer | 9 kHz – 3 GHz
- Fast measurement speed - best for mass production manufacturing tests, service and repair tasks
- Light weight and portable - good for field installation and maintenance tasks
- Full function spectrum analyzer with an affordable price - fits your tight budget and helps you reduce costs
Keysight N9320B RF Spectrum Analyzer | 9 kHz - 3 GHz
- Minimum non-zero span sweep time: < 10 ms
- Resolving power RBW: 10 Hz to 1 MHz
- Sensitivity DANL: -130 dBm, -148 dBm with preamp on
Keysight N9322C Basic Spectrum Analyzer (BSA) | 9 kHz - 7 GHz
- General purpose performance up to 7 GHz with -152 dBm DANL and ±0.6 dB overall amplitude accuracy
- See the real performance of your design with wider (to 1 GHz), deeper views of the most challenging signals
- Measure the spectral purity of your design with industry-leading phase noise and 78 dBc spurious-free dynamic range across 510 MHz bandwidth
Keysight N9340B Handheld RF Spectrum Analyzer, 100 kHz - 3 GHz
- Spectrogram
- Spectrum emission mask
- High-accuracy power measurement with Keysight U2000 Series USB power sensors
Keysight N9342C Handheld Spectrum Analyzer (HSA), 7 GHz
- AM/FM Tune and Listen
- Analog Demodulation
- Field Strength Measurement
Keysight N9343C Handheld Spectrum Analyzer
- 9 kHz to 13.6 GHz
- -144 dBm displayed average noise level (DANL)
- Reduce test setup time by 95% using the innovative task planner option
Keysight N9344C 20 GHz Handheld Spectrum Analyzer
- 9 kHz to 20 GHz
- -144 dBm displayed average noise level (DANL)
- ±1.3 dB amplitude accuracy
Keysight N9912A FieldFox 6 GHz Cable/Antenna Analyzer (Agilent FieldFox N9912A)
- Cable and antenna analyzer for return loss, one-port cable loss, distance to fault, line sweeping, and VSWR measurements
- Handheld network analyzer (S11, S21, phase, and Smith Chart)
- Handheld spectrum analyzer, optional preamplifier
Keysight FieldFox N9917A Handheld Microwave Analyzer
- 18 GHz max frequency
- Carry the world’s most integrated handheld analyzer: standard model includes cable and antenna analyzer
- Expand capabilities with optional VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more
Keysight N9918A FieldFox Handheld Microwave Analyzer
- Standard model includes cable and antenna analyzer.
- Optional VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more
- Ability to measure DTF and TDR in the same sweep
Keysight N9951A FieldFox Handheld Microwave Analyzer
- Standard model includes cable and antenna analyzer.
- Save time by measuring DTF and TDR in the same sweep.
- Measure all four S-parameters simultaneously.
Keysight N9952A FieldFox Handheld Microwave Analyzer | 50 GHz
- 50 GHz max frequency
- Carry industry’s first 50 GHz handheld µW analyzer: standard model includes cable and antenna analyzer
- Expand capabilities with optional VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more
Rohde & Schwarz PR100 Portable Receiver
- Ergonomic and rugged design for portable use
- Detection of unknown signals
- Frequency scan and memory scan
General Dynamics R2625C Communications System Analyzer
RIGOL RSA3030N Real-Time Spectrum Analyzer
- Multiple measurement modes
- Various advanced measurement functions
- Vector network analyzer application
Tektronix RSA306 USB Real Time Spectrum Analyzer
- 9 kHz to 6.2 GHz frequency range
- ACER Laptop with pre-installed SignalVU-PC software included
- +20 dBm to -160 dBm measurement range
Tektronix RSA306B USB Real-Time Spectrum Analyzer | 9 kHz - 6.2 GHz
- Full-featured spectrum analysis capability with included Tektronix SignalVu-PC™ software
- 17 spectrum and signal analysis measurements standard
- Options for mapping, modulation analysis, WLAN, LTE, and Bluetooth standards support, pulse measurements, playback of recorded files, Signal Survey, and frequency/phase settling
Tektronix RSA3303A, 3 GHz Real-Time Spectrum Analyzer
- DC to 3 GHz (RSA3303A) / 8 GHz (RSA3308A) measurement frequency range
- 00 Hz to 3 GHz measurement span and 15 MHz vector span
- Real-time analysis for seamless capture of time-varying RF signals
Tektronix RSA3408B Real-Time Spectrum Analyzer, 8 GHz
- DC to 8 GHz measurement frequency range
- 100 Hz to 3 GHz measurement span and 36 MHz vector span
- Real-time analysis for seamless capture of time-varying RF signals
Tektronix RSA500 Real-Time Spectrum Analyzer Series
- 9 kHz to 3.0/7.5 GHz frequency range covers a broad range of analysis needs
- 40 MHz acquisition bandwidth enables real time analysis for transient capture and vector analysis
- Standard GPS/GLONASS/Beidou receiver for mapping
Tektronix RSA5000 Series Real-Time Spectrum Analyzers
- DPX® Live RF spectrum display
- Triggering expertise
- Seamless data capture
RIGOL RSA5065N Real-Time Spectrum Analyzer
- DANL as low as -165 dBm with optional preamp
- Vector network analysis
- Up to 40 MHz of real-time BW
Tektronix RSA5103A Real-Time Spectrum Analyzer
- Frequency Range 1 Hz to 3.0 GHz.
- Trigger Modes: Free Run, Triggered, FastFrame.
- Level Range 0 dB to –100 dB from reference level.
Tektronix RSA5106A Real-Time Spectrum Analyzer
- Frequency Range 1 Hz to 6.2 GHz.
- Trigger Modes: Free Run, Triggered, FastFrame.
- Level Range 0 dB to –100 dB from reference level.
Tektronix RSA5126A Real-Time Spectrum Analyzer
- Frequency Range 1 Hz to 26.5 GHz.
- Trigger Modes: Free Run, Triggered, FastFrame.
- Level Range 0 dB to –100 dB from reference level.
Tektronix RSA518A Real-Time Spectrum Analyzer
- 9 kHz to18.0 GHz frequency range covers a broad range of analysis needs
- 40 MHz acquisition bandwidth enables real time analysis for transient capture and vector analysis
- High speed full-span sweeps (70 GHz/sec) for fast setup and discovery
Tektronix RSA6000 Series Spectrum Analyzers
- High-performance spectrum analysis Fully preselected and image free at all times for maximum dynamic range at any acquisition bandwidth Fastest high-resolution sweep speed: 1 GHz sweep
- Fully preselected and image free at all times for maximum dynamic range at any acquisition bandwidth
- Fastest high-resolution sweep speed: 1 GHz sweep in 10 kHz RBW in less than 1 second
Tektronix RSA6114A Spectrum Analyzer
- 20 dBm 3rd order intercept at 2 GHz, typical
- Displayed average noise level –151 dBm / Hz at 2 GHz (–170 dBm / Hz, preamp on, typical) enables low-level signal search
- ±0.5 dB absolute amplitude accuracy to 3 GHz for high measurement confidence
Tektronix RSA6114B Spectrum Analyzer | 9 kHz - 14 GHz
- 20 dBm 3rd order intercept at 2 GHz, typical
- Displayed average noise level –151 dBm/Hz at 2 GHz (–167 dBm/Hz, preamp on, typical) enables low-level signal search
- Revolutionary DPX displays transients with a minimum event duration of 3.7 μs
Tektronix RSA6120B Spectrum Analyzer | 9 kHz - 20 GHz
- 20 dBm 3rd order intercept at 2 GHz, typical
- Displayed average noise level –151 dBm/Hz at 2 GHz (–167 dBm/Hz, preamp on, typical) enables low-level signal search
- Revolutionary DPX displays transients with a minimum event duration of 3.7 μs
Anritsu S412D LMR Master - Land Mobile Radio Modulation Analyzer
Wavecrest SIA 3000 Signal Integrity Analyzer
- Infiniband - Test to compliance on all channels simultaneously at speeds up to 4.5Gb/s per channel
- Rambus DRCG - Perform full DRCG validation in seconds
- Fibre Channel and Gigabit Ethernet - Test to compliance on all patterns and all channels simultaneously
Narda SignalShark 3310 Real-Time Handheld Spectrum Analyzer | 8 kHz to 8 GHz
- Extremely high sweep rate of up to 40 GHz/s
- 40 MHz real-time instantaneous bandwidth
- High time resolution spectrogram
Narda SignalShark 3320 Real-Time Remote Analyzer | 8 kHz to 8 GHz
- Frequency range 8 kHz to 8 GHz
- Extremely fast scan rate of up to 50 GHz/s
- 40 MHz real-time instantaneous bandwidth
Narda SignalShark 3330 Real-Time Outdoor Remote Analyzer | 8 kHz - 8 GHz
- IP65-rated robust and weatherproof die-cast aluminum housing
- Stand-alone operation with LTE modem and DC power supply
- Low power consumption
Anritsu S412E LMR Master - Land Mobile Radio Modulation Analyzer
- LMR Signal Analyzers with Coverage Mapping: P25, P25 Phase 2, DMR (MotoTRBO™), TETRA, NXDN, dPMR, PTC-ITCR, PTC-ACSES, NBFM, FDD & TDD LTE
- Broadband Signal Analyzers: LTE, WiMAX
- Interference Analyzer with Interference Mapping and support for MA2700A Handheld Interference Hunter
Anritsu MS2720T Handheld Spectrum Master
- Frequency Ranges: 9 kHz to 9 GHz, 13 GHz, 20 GHz, 32 GHz and 43 GHz
- Internal atomic clock option for increased frequency accuracy
- Measurements: occupied bandwidth, channel power, ACPR, C/I, emission mask, field strength
Stanford Research Systems SR785 Dynamic Signal Analyzer
- DC to 102.4 kHz bandwidth
- 90 dB dynamic range
- 145 dB dynamic range in swept-sine mode
Rohde & Schwarz SR785 Spectrum Analyzer
- DC to 102.4 kHz bandwidth
- 90 dB dynamic range
- 145 dB dynamic range in swept-sine mode