Megger SVERKER 900 Substation and Relay Tester

The Megger SVERKER 900 substation and relay tester provides incredible performance as the need for three-phase testing in renewable power, electrical distribution substations, and industrial applications continues to grow. While designed to perform manual three-phase secondary testing, the SVERKER 900 can also conduct primary testing thanks to the ability for parallel and current series voltage sources that allow for 900V AC or 105A AC output. These voltage sources can be individually adjusted based on a range of settings which allows for more specialized testing results. An intuitive touchscreen interface and protective design allows for reliable field use, making the SVERKER 900 a valuable substation and relay test asset.

Product Info

Mains Input	100-240V AC,50/60Hz
Current Consumption	10A (max)
Power Consumption	1800VA (max)
Voltmeter Measurements	Insulation: 900V, 1273V peak Input Rating: 900V
Voltmeter Frequency Measurements	Range: 10-600Hz Inaccuracy: <0.01% Resolution: <10mHz
Ammeter Frequency Measurements	Range: 10-600Hz Inaccuracy: <0.01% Resolution: <10mHz
Binary Output Insulation	250V AC
Binary Output Current	1A (max)
Unit Measurements	13.8 x 10.6 x 8.7 in. (350 x 270 x 220 mm.
Unit Weight	33.5 lbs. (15.2 kg.)

The toolbox for substation 3-phase testing
Three currents and four voltages
Stand-alone functionality
Rugged and dependable for field use
Generation of 900V and 105A in single phase mode
Secondary and primary testing

Commissioning and maintenance of distributed and generator power Substation
Protection relays
- Electromechanical relays
- Static relays
- Numerical relays
- Self-powered relays
Plotting current transformer excitation curves
Current and voltage transformer ratio tests
Burden measurement for CT circuits
Polarity (direction) tests
Impedance measurement
Primary injection in switchgear
- Three phase
- Single phase
Checking SCADA annunciation and measurement values
Wiring check
Relays with current transformer-operated trip release unit

Keysight 11967D Single Phase LISN

Frequency Range: 9 kHz to 30 MHz
Continuous Current Rating: 10A
Earth Line Choke

EMCO / ETS-Lindgren 3810/2 Line Impedance Stabilization Network

Frequency Range: 9 kHz - 30 MHz
Continuous Current Rating: 10 A
Earth Line Choke

EMCO/ETS-Lindgren 3825/2 Line Impedance Stabilization Network

EMCO 3850/2 Line Impedance Stabilization Network

One Piece, Multi-Line Design for Convenience
Wide Frequency for Broad Measurement
Colis Matched to Application

EMCO/ETS-Lindgren 3925-2 Line Impedance Stabilization Network

One Piece, Multi-Line Design for Convenience
Wide Frequency for Broad Measurement
Coils Matched to Application

EMCO 4825/2 Line Impedance Stabilization Network | 9 kHz - 30 MHz

Frequency range: 9 kHz to 30 MHz
25 A Continuous Current Rating (max.)
Earth Line Choke

Solar 6332 Line Impedance Stabilization Network

Line impedance stabilization Nntwork
Has a current of 100 A
Has an inductance of 5 μH

Solar 6338-5-TS-50-N Line Impedance Stabilization Network

5 μH inductance
Single circuit
Frequency Range of 150 kHz to 65 MHz

Solar 6338-57-PJ-50-N Line Impedance Stabilization Network

Plug and jack terminal
57 µH inductance
Frequency of 14 KHz to 4 MHz

Solar 6338-57-TS-50N Line Impedance Stabilization Network

57 μH inductance
Single-circuit
Frequency range of 150 KHz – 65 MHz

Solar 6693-3L/3R/3R RF-DC Isolator Network

For insertion loss test of EMI filters with DC current flowing through the filter
Consists of two units
Provides a high impedance

Solar 7225-1 Line Impedance Stabilization Network (1 GHz LISN)

Line impedance stabilization network
Supports up to 200 amperes in 50 H styles and 500 amperes in 5 H styles
Frequency range of 10 kHz – 400 MHz (useable up to 1 GHz)

Solar 8012-50-R-24-BNC Line Impedance Stabilization Network

Solar 8309-5-PJ-100-N Line Impedance Stabilzation Network, 5 μH

Line Impedance Stabilization Network (LISN)
Frequency range of 150 kHz to 65 MHz
Has an inductance of 5μH

Solar 8328-50-TS-50-N Line Impedance Stabilization Network

User-friendly and dependable model
Has a current of 50 A
Has a fequency range of 10 KHz to 50 MHz

Solar 9247 Line Impedance Stabilization Network

Line impedance stabilization network
Frequency range of 10 kHz to 50 MHz
Type N, Female connector

Solar 9622 Line Impedance Stabilization Network

Line impedance stabilization network
Has a current of 10 A and an inductance of 50 μH
Frequency range of 10 KHz to 50 MHz

Teseq HV-AN 150 100kHz - 100MHz LISN 5µH, 150A

AN/LISN as defined in CISPR 12, CISPR 25 and ISO 7637-2
HV-AN as defined in draft CISPR 12, draft CISPR 25 and draft ISO 7637-4
LISN as defined in RTCA/DO-160G section 20

PMM ISN T8 Impedance Stabilization Network

Teseq ISN T8 Impedance Stabilization Network

Com-Power ISN T8 Impedance Stabilization Network

Cat. 3 / Cat. 5 ISN
Frequency Range of 150 kHz to 30 MHz
Impedance Stabilization Network for 8 lines

Teseq ISN T8-CAT6 Impedance Stabilization Network

PMM L1-150M Single-Path LISN | 100 kHz - 200 MHz, 150A

L1-150M: 100 kHz to 200 MHz frequency range
L1-150M1: 10 kHz to 400 MHz frequency range
Multi standard design

PMM L2-16B Single-Phase LISN | 9 kHz - 30 MHz, 16 A

9 kHz to 30 MHz frequency range
Up to 16A continuous rated output current
Suitable for DC to 60 Hz power lines

PMM L3-100 3-Phase LISN | 9 kHz - 30 MHz, 100 A

9 kHz a 30 MHz frequency range
100 A max output current
Large baseplate for optimal grounding

PMM L3-32 3-phase LISN | 9 kHz - 30 MHz, 32 A

9 kHz a 30 MHz frequency range
32 A max output current
Large baseplate for optimal grounding

PMM L3-500 3-Phase LISN | 9 kHz - 30 MHz, 500 A

9 kHz to 30 MHz frequency range
Up to 300 A (continuous); 500 A (20 min.) rated output current
Suitable for DC to 60 Hz power lines

PMM L3-64 3-phase LISN | 9 kHz - 30 MHz, 63 A

9 kHz a 30 MHz frequency range
63 A max output current
Large baseplate for optimal grounding

Com-Power LI-1100 Line Impedance Stabilization Network

Frequency range of 150 kHz to 30 MHz
100 Amp (AC) (forced air cooling)
Fully compliant with CISPR 16-1-2 / ANSI C63.4

Com-Power LI-115 Line Impedance Stabilization Network

Com-Power LI-125 Line Impedance Stabilization Network (LISN)

Com-Power LI-125A Line Impedance Stabilization Network 150 kHz - 30 MHz

“Air-core” inductors to prevent saturation
Specification: CISPR 16-1-2 / ANSI C63.4
Application: Power Line conducted emission tests

Com-Power LI-215 Line Impedance Stabilization Network, 30 MHz

Com-Power LI-3100 Line Impedance Stabilization Network (LISN) | 10 kHz - 400 MHz

Frequency range of 10 kHz to 400 MHz
Fully compliant with DO-160/ MIL-STD 461/ CISPR 25/ CISPR 16
5 µH “Air-core” inductor to prevent saturation

Com-Power LI-325 Line Impedance Stabilization Network

Com-Power LI-350 Line Impedance Stabilization Network | 10 kHz - 400 MHz

Frequency range of 10 kHz to 400 MHz
Fully compliant with DO-160/ MIL-STD 461
“Air-core” inductors to prevent saturation

Com-Power LI-400 Line Impedance Stabilization Network

Frequency range of 10 kHz to 10 MHz
Fully compliant with MIL-STD 461
Air-core” inductors to prevent saturation

Com-Power LI-4100 LISN | 10 kHz - 10 MHz

Frequency range of 10 kHz to 10 MHz
Fully compliant with MIL-STD 461
100 Amp(AC) (forced air cooling)

Com-Power LI-550A LISN, 50 Amps, for CISPR 25 & 16

100kHz - 108MHz, 50 Amps
ISPR 25 and CISPR 16-1-2 compliant
Equipped with Superior Electric SUPERCON® shrouded sockets at the mains (power input) and EUT (power output) ports

Solar Electronics Line Impedance Stabilization Networks (LISNs)

Fischer Custom Communications LISN 50-100-1

Fischer Custom Communications LISN 50-100-1-02

LISN
Developed to meet compliance testing requirements and custom requirements
Available for pre-compliance and compliance testing

Chase MN2050B Line Impedance Stabilization Network (LISN)

Frequency Range: 9kHz-30MHz
Max Current: 10A Cont., 16A Peak
Max Voltage: 250V AC & DC

Schwarzbeck NNBL-8240 | 150 kHz - 100 MHz

Complies with MIL-STD-461E standard
150 kHz – 100 MHz
Ideal for military, RF, and space industries

Schwarzbeck NNBM-8124-70 | 10kHz – 400MHz | 70A, 5µH | 1000VDC/400VAC LISN

High Voltage – 1000 VDC 400 VAC
5 µH Network Inductance for MIL/Aero
Calibrated per DO-160

PMM SBRF4 RF Switching Box

PMM SHC-1/1000 CISPR Passive Probes

9 kHz to 30 MHz frequency range
CISPR 16-1-2 compliant
Suitable for lines up to 1000 Vac - 1500 Vdc

PMM SHC-2/1000 CISPR Passive Probes

9 kHz to 30 MHz frequency range
CISPR 16-1-2 compliant
Suitable for lines up to 1000 VAC – 1500 VDC