ABB 504 Power Shield Test Set
ABB BTSB Benchtop Trip Simulator for Breakers
Cutler Hammer 1232C50G05 Secondary Injection Test Kit
Cutler Hammer 1232C50G10 Secondary Injection Test Kit
Cutler Hammer 1287C56G02 Secondary Injection Test Kit
Cutler Hammer 140D481G02R DS Breaker Test Kit
- Accommodate the lower power requirements of microprocessor
- Permits checking of all Trip Unit phase input circuits
- Pickup value accuracy ±10%
Cutler Hammer 140D481G03 DS Breaker Test Kit
- Short delay
- Ground test
- Circuit selector
Cutler Hammer 70C1056G54 Circuit Breaker Test Set
Cutler Hammer 7801C57 OPTIMizer Programmer and Trip Test
Vanguard Auto-Ohm 200 S3
- Measures circuit breaker contact resistance with safety ground on (with the Dual Ground option)
- Stores test records on-board or on external USB Flash drive
- 1 to 200A programmable test current
Utility Relay Company B-292 AC-PRO and AC-PRO-II Test Set
- Rugged construction
- Telescoping handle
- Abbreviated instruction manual
Megger B10E Voltage Power Supply
- Reliable and stable power supply for circuit breaker testing
- Continuously variable 24V - 250V AC or DC output
- Separate outputs for close coil, trip coil and spring charging motor voltage
Megger CB-360-DC DC Circuit Breaker Test Set Up to 30,000 A
- High-current output up to 30,000 amperes
- Capable of testing electromechanical or thermal-magnetic trip devices with dc current
- Digital timer
Multi-Amp/Megger CB-832 Circuit Breaker/Overload Relay Test Set
- Digital memory ammeter
- Digital, multi-range timer
- High-current output
AVO/Multi-Amp/Megger CB-845 Circuit Breaker Test Set
- Digital memory ammeter: High-accuracy, direct reading instrument features read-and-hold memory for measurement
- Digital, multi-range timer: Crystal controlled, high accuracy instrument measures operating time to 1 ms.
- Lightweight and portable: Two-section unit has a total weight of only 175 lb (80 kg).
Multi-Amp/Megger CB-845 Circuit Breaker Test Set
- Digital memory ammeter: High-accuracy, direct reading instrument features read-and-hold memory for
- measurement of short-duration currents.
- Digital, multi-range timer: Crystal controlled, high accuracy instrument measures operating time to 1 ms.
OMICRON COMPANO 100 Primary Injection and Secondary Injection Test Set
- Accurate output of desired value
- Run complex predefined sequences and ramps
- Polarity check signal generation for quick setup of wiring tests
OMICRON CP CB2 Current Amplifier for 2000 Amp CB Testing
- High voltage source can be positioned near the device to be tested
- Low losses thanks to short, high current cable
OMICRON CPC 100 Multi-functional Primary Test System
- Excellent interference suppression facilitates measurement of small signals
- Easy to transport (just 29 kg)
- Ideal for on-site testing
Megger DDA-1600 Circuit Breaker Test Set
- Portable: Housed in a lightweight, rugged, three-piece chassis that can be carried. This reduces the need for heavy equipment to transport the test set.
- Versatile: Designed to test a wide range of air frame and molded-case circuit breakers. Model DDA-1600 will test airframe circuit breakers rated up to 1600 amperes and molded-case circuit breakers
- Initiating control circuit: Fully digital initiating control circuit provides both pulsed and maintained control modes of output duration.
Megger DDA-6000 Universal Circuit Breaker Test Set
- Initiating control circuit
- Zero dc offset
- Compact enclosure
Federal Pioneer DDT-USD Secondary Current Injection Relay Tester
- Battery powered, portable test unit.
- Completely self contained.
- Capable of testing in AC and DC modes.
GE DEH-233 Entellisys System Test Kit
- Simulates power line characteristics for a single circuit breaker in the Entellisys Low Voltage System
- Verifies the function/operation of the protection system
- Overcurrent Protection Tests – Long Time, Short Time, Instantaneous and Ground Fault Protection Tests
Vanguard DMOM-200 S3 True DC Digital Micro-Ohmmeter
- Dual ground option
- Test record storage
- Included cables
Madison Testing DMR5I1 Multifunction Trip Unit Adapter
- Easy connect to any configuration
- Budget-friendly solution for testing aftermarket Digitrip RMS retrofitted trip units
- Offers 32 VDC and 120 VAC power source for OPTIM 750 & 1150, and GO3 base unit
Madison Testing MadTest DSM4i1 Adapter
- DS/DSII 9 pin connector 4 feet in length flexed umbilical cord
- 14 pin connector 4 feet in length flexed umbilical cord
- 2 pin auxiliary power module connector 6 feet in length flexed umbilical cord
Siemens ELTPHB Test Kit
AVO/Multi-Amp/Megger Epoch-II High-Current Output Unit
- Output current source has a 5-minute duty cycle rating of 1000 volt-amperes.
- Four output ranges at 0.01 ampere and two output ranges at 0.1 ampere are provided.
- Tough steel, sealed enclosure provides a high shock and vibration resistance.
GE GTUTK20 EntelliGuard Digital Test Kit
- Operation from a 100-240VAC 50/60 Hz Universal plug supply or two 9-volt alkaline batteries (batteries not supplied).
- Provides power to the trip unit for viewing and setting setpoints with less than 15% load on the breaker or if the replaceable Trip Unit Battery needs replacing.
- Verification of metering (phase simulation)
Phenix HC-2 Portable High Current Test Set 0 - 70 V, 500 A
- Portability: Compact and lightweight, making it easy to transport and use in various field conditions.
- Current Capability: Provides sufficient current output to test high-capacity electrical systems.
- Versatility: Suitable for testing multiple types of electrical protection equipment.
Phenix HC-3 Portable High Current Test Set
- Easy to operate
- Ruggedly constructed for years of field and shop use
- Designed using proven technology, these units combine a variable high current output with user-friendly controls and precision instrumentation
_18.png)
Phenix Technologies HC1 Portable High Current Test System
- Maximum Output: The HC1 can deliver up to 1000 amps for short durations, suitable for testing devices like a typical 150-ampere molded-case circuit breaker when an instantaneous trip element must be
- Variable Current Output: It combines a variable high current output with precise control and instrumentation, making it versatile for various testing needs.
- Auto-Sensing Feature: This function simplifies operation by automatically detecting the state change in the test object (from normally open to normally closed, or vice versa), which helps in managing
Phenix Technologies HC5 Portable High Current Test System
Merlin Gerin ME Secondary Injection Test Set
Phenix MRM-100 Portable 100 Amp Digital Microhmmeter
- Microprocessor Based - Allows for user interface to easily program, read, store, and print tests
- Wide Range of Measurements - Allows user to vary test current from 10 Amps to 105 Amps and measure 1 micro-ohm to 240 milliohms
- Ability to store and print up to 300 Readings—User can print (using a 2.25 inch impact printer) or output readings via an RS-232 interface (USB adapter is optional)
Multi-Amp MS-1A Overload Relay and Circuit Breaker Test Set
- 0 - 140 volts at 4.5 amperes
- 0 - 24 volts at 25 amperes
- 0 6 volts at 100 amperes
Multi-Amp/Megger MS-2 Circuit Breaker Test Set
- Digital memory ammeter: High-accuracy, direct reading instrument has read-and-hold memory for measurement of short-duration currents.
- Digital, multi-range timer: Crystal-controlled, high accuracy instrument with autoranging measures operating time to 1 millisecond.
- High-current output: Provides instantaneous currents up to 750 amperes through a 125 ampere breaker.
Megger MS-2A Circuit Breaker and Overcurrent Relay Test Set
- Light Weight, Portable Primary Injection Test Instrument
- Overcurrent Relay Testing
- Ground Fault Performance Testing for NEC 230.95
Cutler Hammer MTK1000 Magnum Trip Unit Test Kit
- Compact design less than 2lbs in weight.
- Pushbutton operated faceplate display with durable, polycarbonate protective film.
- Two line, digital LCD display screen with antiglare coating.
Cutler Hammer MTK2000 Magnum Trip Unit Test Kit
Megger ODEN AT/2X Primary Current Injection Test System
- Most Advanced Primary Current Injection Test System to simplify all types of switchgear and CT commissioning, ground grid, circuit breaker testing and more
- Modular design to permit optimal user configuration of output current vs. unit size
- Compact transport cart facilitates portability into switchgear rooms with limited space
Megger ODEN AT/3X Primary Current Injection Test System
- Most Advanced Primary Current Injection Test System to simplify all types of switchgear and CT commissioning, ground grid, circuit breaker testing and more
- Modular design to permit optimal user configuration of output current vs. unit size
- Compact transport cart facilitates portability into switchgear rooms with limited space
Cutler Hammer Digitrip OPTIM Trip Unit System
- Programmable protection and coordination
- Trip early warnings
- System diagnostics
Siemens PTS-3 Secondary Injection Test Set
Siemens PTS-4 Portable Test Set
- Input - 120 Volts, 50 or 60 Hz, 15 Amps Maximum
- Output - 0 to 120 Volts, 15 Amps Maximum
- Maximum continuous current on high scale 1.0 Amp
Siemens PTS-5 Secondary Injection Test Set
Schneider Electric / Square D S33594 Circuit Breaker Handheld Test Kit
- Solution for testing and troubleshooting electrical systems
- Works with micrologic trip units and compact NS circuit breakers
- User-friendly interface
Schneider Electric / Square D S33595 Circuit Breaker Full Function Test Kit
- Circuit breaker full function test kit
- For rent at great rates
- User-friendly applications
Megger SPI225 Smart Primary Injection Test System
- Up to 2000 A output
- Smallest primary injection test system in its class
- First unit on the market to eliminate variac control
Carriere STS100 Secondary Injection Relay Tester
- Provides the following output ranges 0-2 Amps continuous 0-8 Amps for 24 seconds on, 120 Seconds off 0-10 Amps for 12 seconds on, 60 seconds off 0-12 Amps for 0.6 seconds on, 3 seconds
- 0-2 Amps continuous
- 0-8 Amps for 24 seconds on, 120 Seconds off
GE TAK-TS1 Test Set
GE TAK-TS2 Secondary Injection Test Set for SST/ECS Trips
Siemens TS-31 Secondary Injection Test Set
GE TVRMS2 Digital Test Kit
- Operation from 120 Vac or six D-cell batteries.
- Trip Unit testing without de-energizing the breaker or removing the Trip Unit from the breaker.
- Verification of switch settings on Power+, RMS-9, and Epic Trip Units.
General Electric TVTS1 Secondary Injection Test Set
- TP4VT
- TP9VT
- T4VT
Vanguard UPS-S2 Portable AC/DC Power Supply
- All output power sources are isolated from the primary power input by an isolation transformer.
- Voltage outputs are variable (auto-transformer) via a front panel control knob.
- The primary power input is selectable (120Vac or 240Vac).
Schneider Electric / Square D UTA Test Set for PowerPack H-, J- and L-Frame Circuit Breakers
Schneider Electric / Square D UTS3 Circuit Breaker Universal Test Set
- Self-test module (CBTMT)
- Standard and full-function Micrologic Series B module (CBTMB) includes rating plug adapter
- Power cord
Vanguard VBT-75P-S2 Vacuum Bottle Tester
- Automatic testing
- 10 kV ¬ 75 kV DC output in 1 kV steps
- Selectable test time duration from 5 seconds to 2 minutes
Siemens WLTS Secondary Current Injection Test Set