EM Test 3-Phase Netwave Series AC/DC Power Supply
- Wide Power Bandwidth; DC - 5kHz
- Output Power up to 60,000VA AC / 72,000W DC
- Output Voltage up to 3*360V AC (p-n), +/-500V DC
Newtons4th IMP753 Impedance Network
Newtons4th PPA5531 Flicker and Harmonics Analyzer
- Fully Compliant Harmonics and Flicker Test Solutions
- Leading wideband accuracy Basic 0.01% with class leading high frequency performance
- ISO17025 accredited ISO17025 IEC61000 certification available
Advanced Analyzers HFA-3-36-REF Harmonics and Flicker Analyzer | 3 ph, 36 A
- Up to Harmonic 40
- Can be optionally selected to show 2 - 9 kHz
- 0 - 350 V-rms ±500 Volt peak std
Advanced Analyzers AA-HFA-3-75-Z-REF-Z-TEST | 3 ph, 75 A
- 0 - 36 A-rms
- 0 - 100 A-pk for 10 seconds
- 1 - 15000 VA
California Instruments CSW5550 Programmable AC/DC Power Source
- Output: 5.5kVA, 0-156/312V, 3ph
- Frequency Range: 40Hz - 5kHz
- Input Power: 187/264Vrms (3 wire), 342/457Vrms (4 wire), 3ph
Teseq Profline 2105 | 1 ph, 5 KVA
- 5 kVA output power
- Immunity test system that is simple to upgrade, pc-based
- Accessible control interface
Keysight PA2203A IntegraVision Power Analyzer | 4 Channels, 3-Phase AC
- Operates like an oscilloscope, but makes measurements like a power analyzer
- Achieve 0.05% basic accuracy for superior measurement integrity
- The PA2201A comes with 2 power channels for single phase measurements and analysis; the PA2203 has 4 power channels for 3-phase measurement and analysis
Danisense 6 Channel Current Transducer System
- Compact 19” rack mount 1U height
- Current transducers’ output signals (current or voltage) available via 4mm banana plugs
- Individual or serial access to calibration windings of all 6 transducers via 4mm banana plugs
Yokogawa WT1806E Precision Power Analyzer
- 6 inputs on a high-resolution display
- Harmonic analyses
- Guaranteed accuracy across a wide range
Tektronix PA4000 Power Analyzer, DC - 1 MHz, 30 ARMS, 1000 VRMS
- 1 to 4 Input Modules allows several configurations to match your application
- High measurement accuracy of 0.04% (basic voltage & current accuracy) for demanding test requirements
- Dual internal current shunts for each module maximize accuracy for high- and low-current measurements
Teseq NSG 1007-5 Single Phase AC and DC Power Source
- 5 kVA AC Source L-L three phase input
- Single phase output
- Arbitrary waveform generation
CNS Poway HFA-16/75 1 Phase Harmonics & Flicker Analyzer
- ISO-17025 accredited device
- 16 bit USB based data acquisition
- PLL based sampling method
Keysight N6705A DC Power Analyzer | 600 W
- Easy to use R&D tool for sourcing and measuring DC voltage and current into the DUT
- Integrates capabilities of up to 4 Power Supplies, DMM, Scope, Arb and Data Logger
- Access all capabilities without programming; either use the front panel controls or the 14585A Control and Analysis Software
DaniSense DS600ID 600Arms Current Transducer
- 1ppm maximum linearity error
- Fluxgate loop technology
- DSUB 9 pin connection
Xitron 2503AH Series Power Analyzer
- 18-bit, 500 kHz sampling speed provides 0.05% basic accuracy
- Ultra-fast FFT’s per channel produce measurements in 10 ms
- 3000 V Peak, 50 Amp Peak internal shunt and Hall effect CT’s
NH Research S320 Power Supply Analyzer
- Level of flexibility normally associated with custom design instruments
- Ability to control DC power supplies along with DC dynamic loads within the same 5.25 in chassis
- Allows for power quality analysis
Danisense DS50ID 50Arms Current Transducer
- Linearity error maximum 8 ppm
- Fluxgate, closed loop compensated technology with fixed excitation frequency and second harmonic zero flux detection for best in class accuracy and stability
- Industry standard DSUB 9 pin connection
Voltech IEC555 Reference Impedance Network
Hioki PW6001
- High noise resistance and stability
- Accurate measurement even when the load is characterized by large fluctuations
- TrueHD 18-bit resolution
Yokogawa WT230 Digital Power Meter
- Maximum input with assured accuracy: 26 A
- Basic accuracy: 0.1%
- DC measurement: 0.5 Hz to 100 kHz frequency range
Yokogawa WT310E Digital Power Analyzer
- DC, 0.1Hz – 100kHz
- 5mA – 20A (direct input)
- Voltage Input: 15V – 600V
Valhalla 2105 Wide-Range Power Analyzer
- Up to 20 A / phase direct (self-contained shunt)
- Expandable to 1000 amps
- True power measurements, VI cos Ø
Pacific Power 320ASX Single / Three Phase AC Power Supply | 2000 VA
- 22 Waveform Library – Arbitrary Waveform Generator
- 15 to 1,200 Hz Operation – 5,000 Hz Bandwidth
- Precision Voltage Programming – 0.05% with CSC engaged
California Instruments MX45 AC Power Source
- Output: 45kVA, 0-150/300V, 3ph
- Frequency Range: 40 - 1000Hz
- Input Power: 208/480 ±10%VAC, 3ph