Haefely PSURGE 30.2 Surge Test System | 30 kV / 30 kA
- Up to 30 kV impulse voltage
- Up to 30 kA impulse current
- automatic polarity switching
Haefely AXOS8 Compact Conducted Immunity Test System
- 0.2 – 5.0 kV ±10% at coaxial output
- 50 Ohms
- 5 ns ±30%
Haefely AXOS5 Compact Immunity Test System
- Easy to operate with manual and automated test modes, software assisted test preparation
- Pre-defined test routines and visual aided test setups
- Economic & efficient touch screen guarantees reduction of time and effort
EMC Partner IMU-MGE Conducted Immunity Test System
- Surge / CWG 4kV / 5 kV / 6kV / 8kV
- Ring Wave 6kV / 8kV
- EFT 4kV / 5kV / 6kV / 7kV
Thermo Keytek ECAT E521
- AC CDN for single-phase lines to 480V, 32A
- Surge Repetition Rate 1 shot/30 seconds @ <=10kV 1 shot/minute @ >10kV
- Open-Circuit Voltage: 1.2/50µs, 200V to 20.2kV ±10%
Haefely PSURGE 8000 Surge Platform Test System
- Built according to IEC/EN 61000-4-5 Ed. 1 & 2 and ANSI C62.41/45
- 1.2/50 µs open circuit up to 7.4 kV
- 8/20 µs short circuit up to 3.7 kA
EMC Partner IMU3000 Immunity Tester
- 7” Colour touch panel
- Rotary knob for navigation and data entry
- EPOS (EMC PARTNER Operating System) a new concept in graphical user interface
M Precision Laboratories EMCPro PLUS EMC Test System
- Portable, mid-range EMC test system
- Resident capabilities for compliance testing to 6 IEC/EN standards
- Addresses ANSI/IEEE C62.41, ITU, ETSI, & UL 864 standards
Thermo Keytek ECAT E103 Control Center
- Virtual Front Panel™ retains key operating parameters during set up & testing
- Multi-level system interlock architecture provides maximum safety
- Single output port/instant mode switching
EMC Partner CDN-A-8-200 Coupling-Decoupling Network | 1500 VDC , 200 A
- Multicolor LED coupling path indication
- Up to 1500 VDC EUT voltage
- Ready for EV and railway testing
EM Test OCS 500N6F | 3 MHz / 10 MHz / 30 MHz
- Fully automated single box test system
- Single DUT port
- Fast Damped Oscillatory Waves up to 4.4kV
EMC Partner IMU-MGS Conducted Immunity Generator
- One touch parameter editing in run state
- Impulse stability over long periods
- Intuitive multi touch graphical interface
Teseq NSG 3060 Transient Generator
- Modular, expandable system
- Surge voltage to 6.6 kV for overtesting
- Easy to use 7" color touch screen
EM Test NX5 Multifunctional Test Generator
- Small transient generator with 7" color touch screen
- IEC 61000-4-4 | Burst testing, 5.5kV
- IEC 61000-4-5 | Surge testing, 5.0kV
EMC Partner IMU4000 Immunity Tester 4kV
Haefely FP-SURGE 100M2 Coupling/Decoupling Network for Surge
- Combination wave 1.2/50us - 8/20us
- Ring wave 100kHz
- 8kV impulse voltage
Haefely FP-COMB 63 Combined Automatic 3-Phase Coupling / Decoupling Network
- 0.2 – 5.0 kV ±10% at coaxial output
- 5 kV
- Up to 690 V AC | 50/60 Hz, 16, 7 Hz, DC
Teseq CDN 3083-S100 CDN | 3 Ph, 100 A, 690 V
- 100 Amps per phase with generous overload capacity
- For EUT power supplies up to 620 Volts
- Complies with IEC/EN 61000-4-5 and ANSI C62.45
Teseq NSG 3150 Combination Wave Surge Generator | 15 kV
- Surge voltage up to 15 kV
- CDN range: Single & Three Phase, up to 63 A, 690 VAC, 1000 VDC
- Safest 15 kV connector type on the market
Haefely FP-COMB 32 Coupling/Decoupling Network
- Surge Combination Wave, 1.2/50us - 8/20us
- Ring Wave, 100kHz
- Electrical Fast Transient (EFT) / Burst
Teseq CDN HSS-2 for Unshielded Symmetrical High Speed Communication Lines
- CDN for 1.2/50 μs pulse as per IEC 61000-4-5/Ed.3/77B/674A/CD:2012-05
- CDN for up to 8 wire unshielded twisted pair (UTP)
- Coupling to 1, 2 or 4 pairs
EMC Partner CDN UTP8 ED3 Coupling/Decoupling Network
Teseq CDN 3083-B100 EFT/Burst Coupling/Decoupling Network
- 690 VAC, 1000 VDC
- Up to 8.8 kV burst pulses
- 100 A three-phase EFT / burst CDN
Haefely PCD126A Telecom CDN
- Combination wave 1.2/50 us - 8/20 us impulse
- Serial resistor 40 Ohm included
- Up to 4 wires can be tested
EM Test ACC Automotive Coupling Clamp
- An automotive coupling clamp
- Constructed with precision
- Up to 40 mm diameter cables