{% DocumentName %}
Manufacturer: 

Teseq

Teseq
Teseq GTEM 250 RF Enclosure
Teseq GTEM 250 RF Enclosure The Teseq GTEM 250 cell is a test site for efficiently performing both radiated immunity and emissions test in a single, controlled environment. Compared to other test sites, Gigahertz Transverse Electro Magnetic (GTEM) testing...
SKU: SCHA-GTEM-250
Teseq NSG 438 ESD Gun | 30 kV
Teseq NSG 438 ESD Gun | 30 kV The Teseq NSG 438 30 kV ESD Gun fulfills the requirements of all known ESD standards. The basic model is type approved and calibrated in conformity with IEC 61000-4-2. By adding appropriate network modules, other standards can...
SKU: TESE-NSG438
Calibrate
Teseq NSG 435 | 16.5 kV
Teseq NSG 435 | 16.5 kV The Teseq NSG 435 ESD Simulator is a programmable electrostatic discharge (ESD) testing device which generates a discharge voltage of 200 V to 16.4 kV. Teseq NSG 435 ESD guns simulate ESD, the high-frequency pulse components...
SKU: SCHA-NSG435
Calibrate Rent Now
Teseq NSG 3060 Transient Generator
Teseq NSG 3060 Transient Generator The Teseq NSG 3060 Multi-Function Generator generates surge voltage to 6.6 kV and emits an EFT/Burst pulse of up to 4.8 kV/1 MHz. Teseq NSG 3060 devices simulate electromagnetc interference effects for the purpose of immunity...
SKU: SCHA-NSG3060
Teseq NSG 3150 Combination Wave Surge Generator | 15 kV
Teseq NSG 3150 Combination Wave Surge Generator | 15 kV The Teseq NSG 3150 is a surge generator solution for IEC/EN 61000-4-5 standards. Particularly suited for outdoor use, this model is essential for evaluating various systems such as lighting, communications, and energy...
SKU: TESE-NSG3150
Calibrate
Teseq NSG 3040-SOW Slow Oscillating Waveform Generator
Teseq NSG 3040-SOW Slow Oscillating Waveform Generator The Teseq NSG 3040-SOW is a slow damped oscillatory wave test instrument that fulfills IEC/EN 61000-4-18 and ANSI C37.90.1 testing requirements, operates over a frequency range of 100 kHz to 1 MHz and generates 0.2 to 4.4 kV of...
SKU: SCHA-NSG3040-SOW
Teseq CDN 3063-S100 3-Phase Coupling/Decoupling Network
Teseq CDN 3063-S100 3-Phase Coupling/Decoupling Network The CDN 3063-S100 3-phase 480 V/100 A automatic coupling decoupling network (CDN) for Surge and Ring Wave pulses up to 6.6 kV is part of the CDN 3063 Coupling/Decoupling Networks Series. The new, modular CDN 3063 continue Teseq...
SKU: SCHA-CDN3063-S100
Calibrate
Teseq NSG 5500 Automotive Transient Immunity Tester for ISO 7637
Teseq NSG 5500 Automotive Transient Immunity Tester for ISO 7637 The Teseq NSG 5500 is an Automotive Transient Immunity Test Set made to conduct testing with capacitive discharge pulse interference necessary for ISO 7637, JASO, DIN, SAE, and various others. Teseq NSG 5500 has...
SKU: SCHA-NSG5500-1
Teseq CBA 1G-275 Class A Broadband Amplifier, 80 MHz - 1000 MHz, 250 Watts
Teseq CBA 1G-275 Class A Broadband Amplifier, 80 MHz - 1000 MHz, 250 Watts Designed specifically for radiated EMC Testing, this mismatch tolerant Class A amplifier delivers power continuously into the very poor match typically associated with broadband EMC antennas when used at low frequency.   ...
SKU: SCHA-CBA1G-275
Teseq NSG 3040 Transient Generator
Teseq NSG 3040 Transient Generator The Teseq NSG 3040 Transient Generator generates surge voltage to 4.4 kV and emits an EFT/Burst pulse of up to 4.8 kV/1 MHz. Teseq NSG 3040 devices simulate electromagnetic interference effects for the purpose of immunity...
SKU: SCHA-NSG3040
Teseq Profline 2105 | 1 ph, 5 KVA
Teseq Profline 2105 | 1 ph, 5 KVA The Teseq Profline 2105 Harmonics and Flicker Measuring System is a 5 kVA, single-phase test system crafted to measure the subtleties of harmonic and flicker activity in accordance with IEC 61000-3-2 and IEC 61000-3-3...
SKU: TESE-PROFLINE-2105-208
Teseq PA 5740 Power Amplifier/Battery Simulator
Teseq PA 5740 Power Amplifier/Battery Simulator The Teseq PA 5740 Power Amplifier/Battery Simulator is designed to replace vehicle batteries in test scenarios. This battery simulator meets stringent criteria for power, voltage, slew rate, and impedance, catering to specific...
SKU: SCHA-PA5740
Rent Now
Teseq NSG5200 Automotive Transient Test System
Teseq NSG5200 Automotive Transient Test System Teseq NSG5200 Automotive Transient Test System performs EMC Immunity Testing for the Automotive market and complements the NSG 5000 system. Emphasis has been placed on the modularity of the NSG 5200 to facilitate the...
SKU: SCHA-NSG5200
Teseq KEMZ 801AS 10 kHz - 1 GHz EM Clamp for IEC/EC 61000-4-6
Teseq KEMZ 801AS 10 kHz - 1 GHz EM Clamp for IEC/EC 61000-4-6 IEC 61000-4-6 (EN 61000-4-6) defines three basic types of transducer used for the injection of test signals into the equipment under test (EUT). The basic requirement is to inject a known level of RF signal onto the cable of...
SKU: SCHA-KEMZ801A
Teseq NSG 4070-75 Conducted & Radiated Immunity Test System
Teseq NSG 4070-75 Conducted & Radiated Immunity Test System The NSG 4070, successor of the NSG 2070, is a multifunctional EMC immunity test system. Its large frequency range from 9kHz to 1GHz and its modular set-up using internal or external amplifiers enable a large variety of...
SKU: SCHA-NSG4070-75
Teseq NSG 4070B
Teseq NSG 4070B The Teseq NSG 4070B is a multifunctional device for EMC immunity tests, including LF/RF immunity and transient, with a frequency range of 9kHz to 1GHz. Its modular setup uses internal or external amplifiers to enable a large...
SKU: TESE-NSG4070B-80
Teseq CDN HSS-2 for Unshielded Symmetrical High Speed Communication Lines
Teseq CDN HSS-2 for Unshielded Symmetrical High Speed Communication Lines The Coupling Decoupling Network CDN HSS-2 is designed for convenient surge testing with 1.2/50 μs pulses, as defined in IEC/EN 61000-4-5, on unshielded symmetrical high speed telecommunication lines e.g. Ethernet. Coupling...
SKU: SCHA-CDN-HSS-2
Calibrate Rent Now
Teseq NSG 4031 Broadband Immunity Test System
Teseq NSG 4031 Broadband Immunity Test System The Teseq NSG 4031 Broadband Immunity Test System is a 150kHz to 80MHz transient immunity generator designed to generate test waveforms in compliance with IEC/EN 61000-4-31. Teseq NSG 4031 test systems feature a white noise...
SKU: TESE-NSG4031
Teseq NSG 4060 Low Frequency Immunity Test System
Teseq NSG 4060 Low Frequency Immunity Test System The Teseq NSG 4060 is an EMC immunity test system for the frequency range 15 Hz to 150 kHz. It consists of sine wave generator, power amplifier and EUT monitoring interfaces. The application range includes tests according to...
SKU: TESE-NSG4060
Teseq CDN 3083-B100 EFT/Burst Coupling/Decoupling Network
Teseq CDN 3083-B100 EFT/Burst Coupling/Decoupling Network High frequency pulse signals can result in cross-talk between conductors running in parallel even over short distances. This behavior is taken into account in the latest and currently valid edition of the EFT/burst standard EN...
SKU: SCHA-CDN3083-B100
Calibrate Rent Now
Teseq CDN 3083-S100 CDN | 3 Ph, 100 A, 690 V
Teseq CDN 3083-S100 CDN | 3 Ph, 100 A, 690 V The coupling network Schaffner / Teseq CDN3083-S100 Manual High-Current Coupling Network is intended for use with surge generators. These generators produce high voltage test pulses with high energy. The Schaffner / Teseq...
SKU: SCHA-CDN3083-S100
Rent Now
Teseq CDN 3061 Automated 1-Phase Coupling/Decoupling Network
Teseq CDN 3061 Automated 1-Phase Coupling/Decoupling Network The Teseq CDN 3061 is an automated 1-phase coupling/decoupling network designed for comprehensive EMC testing, ensuring electromagnetic compatibility and resilience of modern electronic devices. Integrating surge, ring wave...
SKU: SCHA-CDN3061
Teseq NSG 3025 Burst Generator
Teseq NSG 3025 Burst Generator The NSG 3025 is optimal for burst tests such as IEC/EN 61000-4-4. The parameters can be adjusted over ranges that exceed the requirements called for in the standards, and pulse data can also be adjusted during an actual test to...
SKU: SCHA-NSG3025
Calibrate
Teseq CBA400M-110 10kHz-400MHz, 100 Watt RF Amplifier
Teseq CBA400M-110 10kHz-400MHz, 100 Watt RF Amplifier Designed specifically for automotive, military and aerospace BCI and other susceptibility EMC testing, this mismatch tolerant Class A amplifier delivers power continuously into the varying match typically associated with this...
SKU: SCHA-CBA400M-110
Teseq CBA 9426 RF Amplifier 80M-1GHz 50W
Teseq CBA 9426 RF Amplifier 80M-1GHz 50W The Teseq CBA-9426 amplifier is a solid-state class-A unit capable of generating 50 W minimum power over an 80-1000 MHz frequency range. The Teseq CBA-9426 is powered by a switched-mode supply for high-efficiency, high-power...
SKU: SCHA-CBA9426
Rent Now
Teseq NSG 437 | 30 kV
Teseq NSG 437 | 30 kV The Teseq NSG 437 ESD Simulator is an electrostatic discharge testing system that produces up to 30 kV of air and contact discharge. Designed to fulfill a host of international requirements, the Teseq NSG 437 meets the vast...
SKU: TESE-NSG437
Calibrate
ESD Simulator Kit
ESD Simulator Kit The ESD Simulator Kit Bundle includes the Teseq NSG 438 ESD Gun Simulator System, Teseq INA, and Electro-Tech 949-2 which together form a comprehensive test solution for achieving IEC 61000-4-2, MIL-461G CS118, or DO-160...
SKU: BUNDLE-ESD-NSG-KIT
IEC 61000-4-6 RF Signal Testing System
IEC 61000-4-6 RF Signal Testing System The IEC 61000-4-6 RF bundle includes the Com-Power CDN-M325 Coupling/Decoupling Network and a Teseq NSG 4070B Test System for Conducted and Radiated Immunity, which together form a complete test solution for achieving IEC 61000...
SKU: *SCHA-NSG4070B-75
Teseq 2145 45kVA 3-Phase Flicker and Harmonics Measuring System
Teseq 2145 45kVA 3-Phase Flicker and Harmonics Measuring System The Teseq 2145 45kVA 3-Phase Flicker and Harmonics Measuring System limits the EMC generated as a result of the continuing expansion of electronics and electrical products that make life in the home, office or factory more...
SKU: SCHA-2145-208
Teseq AES 5501 Automotive Emissions Test System for ISO 7637-2
Teseq AES 5501 Automotive Emissions Test System for ISO 7637-2 The AES 5501 is a system of electronic and mechanical switches, an artificial network, and a unique control station designed for emissions testing to ISO 7637-2. Having gone through meticulous development and intensive beta...
SKU: SCHA-AES5501
Teseq CDN 117 Data Line Coupling/Decoupling Network
Teseq CDN 117 Data Line Coupling/Decoupling Network Teseq’s CDN 117 coupling-decoupling network enables convenient testing with surge pulses of 1.2/50 μs on data, signal or peripheral lines, as specified in many product standards. The test method, severity levels...
SKU: SCHA-CDN117
Calibrate
Teseq CDN 118 Telecom Line Coupling/Decoupling Network
Teseq CDN 118 Telecom Line Coupling/Decoupling Network Teseq’s CDN 118 coupling-decoupling network is designed for convenient surge testing of telecommunications equipment to IEC/EN 61000-4-5, which specifies a 1.2/50 μs or a 10/700 μs pulse. The CDN 118 includes the...
SKU: TESE-CDN118-T4
Teseq CDN 118-M Telecom Line Coupling/Decoupling Network
Teseq CDN 118-M Telecom Line Coupling/Decoupling Network Teseq’s CDN 118-M coupling-decoupling network is designed for convenient surge testing of telecommunications equipment to IEC/EN 61000-4-5, which specifies a 1.2/50 μs or a 10/700 μs pulse. The CDN 118 includes the...
SKU: SCHA-CDN118-M
Calibrate Rent Now
Teseq CDN 163 EFT / Burst Coupling Network
Teseq CDN 163 EFT / Burst Coupling Network High frequency pulse signals do result in cross-talk between conductors running in parallel even over short distances. This behavior is taken into account in the latest and currently valid edition of the burst standard EN/IEC...
SKU: SCHA-CDN163
Rent Now
Teseq CDN 3425 Burst/EFT Coupling Clamp
Teseq CDN 3425 Burst/EFT Coupling Clamp The CDN 3425's principle function is to couple Burst/EFT pulses to data lines. It may also be used to couple to mains lines where no CDN is available. This new design is fully compliant with the specifications of IEC 61000...
SKU: SCHA-CDN3425
Calibrate
Teseq CDN 500 ISO 7637-3 Capacitive Coupling Clamp
Teseq CDN 500 ISO 7637-3 Capacitive Coupling Clamp This product is an accessory for the Teseq NSG 5500. Visit Teseq NSG 5500 The coupling clamp CDN 500 is manufactured exactly in accordance with the drawings and specifications of ISO 7637-3 for capacitively coupling the...
SKU: SCHA-CDN500
Rent Now
Teseq CDN 8015 Capacitive Coupling Clamp
Teseq CDN 8015 Capacitive Coupling Clamp The coupling clamp is primarily used to inject fast transient and burst interference pulses into signal and data cables, i.e. into any type of connection to peripheral equipment. The IEC standard 61000-4-4 also allows the...
SKU: SCHA-CDN8015
Rent Now
Teseq CDN USB/P Coupling/Decoupling Network
Teseq CDN USB/P Coupling/Decoupling Network The Teseq CDN USB/P is a CDN with a USB connector for EUT-peripheral devices. IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable...
SKU: SCHA-CDN-USB/P
Rent Now
Teseq CDN3063-C32 Coupling/Decoupling Network
Teseq CDN3063-C32 Coupling/Decoupling Network The CDN3063-c32 is a automated 3-phase coupling network for burst (EFT) and surge (combination wave, ring wave). This fully automated IEC and ANSI compliant coupling network fulfills the new requirements for EUT currents over...
SKU: SCHA-CDN3063-C32
Calibrate
Teseq CDND M316-2 Coupling/Decoupling Network for Differential Mode
Teseq CDND M316-2 Coupling/Decoupling Network for Differential Mode IEC / EN 61000-4-19 specifies the differential voltage test in the frequency range 2 kHz to 150 kHz. Teseq offers with CDND M316-2 a coupling / decoupling network for single phase mains application. It can be used for both...
SKU: TESE-CDND-M316-2
Rent Now
Teseq CN Series Coupling Network (CN) For IEC / EN 61000-4-16, DC to 150 kHz
Teseq CN Series Coupling Network (CN) For IEC / EN 61000-4-16, DC to 150 kHz The Teseq CN Series Coupling Network (CN) is designed for IEC / EN 61000-4-16, DC to 150 kHz. Each coupling network is related to the type of cable and connector; a specific 60 dB decoupling network is required in addition to...
SKU: TESE-CN-SERIES
Teseq CT 419-5 Current Transformer for IEC / EN 61000-4-19
Teseq CT 419-5 Current Transformer for IEC / EN 61000-4-19 IEC / EN 61000-4-19 specifies the differential current test in the frequency range 2 kHz to 150 kHz. Teseq offers with CT 419-5 a transformer with integrated matching network for testing EUTs like electricity meters. The CT 419...
SKU: TESE-CT419-5
Rent Now
Teseq DCP 0100A Dual Directional Coupler
Teseq DCP 0100A Dual Directional Coupler The Teseq DCP 0100A Dual Directional Coupler is a coupler designed to augment immunity test systems by enhancing the monitoring of forward and reflected power into antennas, clamps or other transducer devices. Dual-directional...
SKU: TESE-DCP0100A
Teseq FG5621 Arbitrary Waveform Module for Teseq NSG5600
Teseq FG5621 Arbitrary Waveform Module for Teseq NSG5600 This product is an accessory to the NSG 5600. Visit the NSG 5600 The function generator FG 5621 is used universally throughout the Teseq NSG 5600 for the control of DC sources and power amplifiers. The AutoStar&trade...
SKU: SCHA-FG5621
Teseq HV-AN 150 100kHz - 100MHz LISN 5µH, 150A
Teseq HV-AN 150 100kHz - 100MHz LISN 5µH, 150A Teseq’s artificial network/LISN HV-AN 150 is the first universal solution which covers several applications and standards in the Automotive, Airborne and MIL range. It offers the right solution for both high current and...
SKU: TESE-HV-AN150
Teseq INA 265B Attenuator
Teseq INA 265B Attenuator INA 265B is part of the calibration set CAS 3025 consisting of a second attenuator (INA 266A) plus an RG58 BNC cable which have been specially designed for periodic verification of the specifications of burst/EFT generators in...
SKU: SCHA-INA265B
Teseq INA 6502 16 A Programmable Step Transformer
Teseq INA 6502 16 A Programmable Step Transformer The Teseq INA 6502 is an automatic step transformer type and a standard accessory for the Teseq NSG 3040/3060 units to meet IEC 61000-4-11 requirements. It enables the AC power supply voltage to be set to 0%, 40%, 70%...
SKU: SCHA-INA6502
Teseq INA 702 Magnetic Field Coil | 1200 A/m Pulsed
Teseq INA 702 Magnetic Field Coil | 1200 A/m Pulsed The Teseq INA 702 Magnetic Field Coil stands as a multifaceted instrument in EMC testing, adept at producing magnetic fields reaching 1200 A/m pulsed, in accordance with the benchmarks set by IEC 61000-4-8 and IEC 61000-4-9...
SKU: SCHA-INA702
Teseq INA6501 Manual Step Transformer
Teseq INA6501 Manual Step Transformer The step-transformer type INA 6501 is a standard accessory for the Schaffner Modula 6000 instrumentation series and for the NSG3040/NSG3060. It provides a convenient means of reducing the incoming supply voltage by pre-set...
SKU: SCHA-INA6501
Rent Now
Teseq ISN T8 Impedance Stabilization Network
Teseq ISN T8 Impedance Stabilization Network The Teseq ISN-T8 offers exacting impedance stabilization to ensure the most accurate EMC testing results. The design caters to a wide array of testing scenarios, offering unmatched flexibility to accommodate a multitude of...
SKU: TESE-ISN-T8
Teseq ISN T8-CAT6 Impedance Stabilization Network
Teseq ISN T8-CAT6 Impedance Stabilization Network Impedance stabilization networks (ISN) are coupling/decoupling networks according to CISPR 22 (EN 55022) for measurement of conducted common mode disturbances of information technology equipment (ITE). The ISN is placed between...
SKU: TESE-ISN-T8-CAT6
Teseq ITF 14A Isolation Transformer 60 dB
Teseq ITF 14A Isolation Transformer 60 dB The Teseq ITF 14A provides the 60 dB decoupling as required in IEC / EN 61000-4-16. The ITF is placed between coupling network and mains. It can be used for a mains frequency in the range 47 to 63 Hz.
SKU: TESE-ITF14A
Rent Now
Teseq ITS 6006 Radiated Immunity Test System 80 MHz - 6 GHz
Teseq ITS 6006 Radiated Immunity Test System 80 MHz - 6 GHz The Teseq ITS 6006 Radiated Immunity Test System 6 GHz consists of an integrated RF signal generator, RF switch and EUT monitoring interfaces. The unit is designed for various radiated EMC applications in the 80 MHz to 6 GHz...
SKU: SCHA-ITS6006
Teseq MD103 ESD Pulse Calibration Set
Teseq MD103 ESD Pulse Calibration Set Calibration procedures on ESD generators call for high class test equipment and a carefully configured test rig. All the elements incorporated within the measurement chain must be matched to one another before highly accurate...
SKU: SCHA-MD103
Teseq MFO 6502 Automatic Power Line Frequency Magnetic Field Generator | 50/60 Hz, 40 A/m
Teseq MFO 6502 Automatic Power Line Frequency Magnetic Field Generator | 50/60 Hz, 40 A/m The Teseq MFO 6502 Automatic Power Line Frequency Magnetic Field Generator, an adjunct to the NSG 3040 series, automates tests, ensuring seamless integration and operation. This model connects via a system cable, embedding...
SKU: SCHA-MFO6502
Teseq Mil-Std-461 CS114 10kHz - 400 MHz Conducted Susceptibility Test System
Teseq Mil-Std-461 CS114 10kHz - 400 MHz Conducted Susceptibility Test System Advanced Test Equipment Rentals provides all components for the mil-std 461 CS114 test system using the Teseq NSG4070 as the nucleus.
SKU: TESE-NSG4070C-80
Teseq NSG 1007-5 Single Phase AC and DC Power Source
Teseq NSG 1007-5 Single Phase AC and DC Power Source By combining a flexible AC/DC power source with a high performance power analyzer, the Teseq NSG 1007-5 Single Phase AC and DC Power Source is capable of handling complex applications that have traditionally required multiple...
SKU: TESE-NSG1007-NR
Teseq NSG 3040A Multifunction Generator, 4.8 kV
Teseq NSG 3040A Multifunction Generator, 4.8 kV The Teseq NSG 3040A Multifunction Generator is a 4.8 kV conducted immunity test solution designed for CE applications. It tests surge voltage to 4.8 kV, EFT/Burst to 4.8 kV / 1 MHz and PQT to 16 A / 300 VAC & DC. The Teseq...
SKU: TESE-NSG3040A
Teseq NSG 3060A Multifunction Generator | 6.6 kV
Teseq NSG 3060A Multifunction Generator | 6.6 kV The Teseq NSG 3060A Multifunction Generator is a conducted immunity generator with surge voltage to 6.6 kV, ringwave voltage to 6.6kV, EFT/Burst to 4.8 kV / 1 MHz and PQT to 16 A / 300 VAC & DC. Teseq NSG 3060A conducted...
SKU: TESE-NSG3060A
Teseq NSG 4070C Test System for Conducted and Radiated Immunity
Teseq NSG 4070C Test System for Conducted and Radiated Immunity Teseq NSG 4070C Test Systems for Conducted and Radiated Immunity are a series of multi-functional EMC test instruments ideal for conducted immunity and radiated immunity testing. Teseq NSG 4070C models conform to IEC / EN 61000...
SKU: TESE-NSG4070C
Teseq NSG 4070C-80 Test System for Conducted and Radiated Immunity
Teseq NSG 4070C-80 Test System for Conducted and Radiated Immunity The Teseq NSG 4070C-80 Test System for Conducted and Radiated Immunity is an 80W, 150kHz - 230MHz immunity test instrument that adheres to IEC/EN 61000-4-6. Teseq NSG 4070C models also fulfill other automotive standards...
SKU: TESE-NSG4070C-80
Teseq NSG 4070C-110 Test System for Conducted and Radiated Immunity
Teseq NSG 4070C-110 Test System for Conducted and Radiated Immunity The Teseq NSG 4070C-110 Test System for Conducted and Radiated Immunity is a 110W, 10kHz - 400MHz / 4kHz - 1GHz immunity testing device with a built in RF signal generator and power meter. Teseq NSG4070C models specialize in...
SKU: TESE-NSG4070C-110
Teseq NSG 438A | 30 kV
Teseq NSG 438A | 30 kV The Teseq NSG 438A ESD Gun Simulator System has an elegant solution to discharge the EUT using a relay circuit which dissipates the residual voltage by connecting a 1 MΩ resistor from the EUT to ground for a controlled...
SKU: TESE-NSG438A
Calibrate
Teseq NSG 5071 Inducitive Switch Transient Test Circuit
Teseq NSG 5071 Inducitive Switch Transient Test Circuit The Teseq NSG 5071 is an inductive switch transient circuit that was created in accordance with Ford standard EMC-CS-2009. Featuring the CI 260 Waveform F,  the test circuit uses the same relay and the test circuit defined...
SKU: SCHA-NSG5071
Rent Now
Teseq NSG 5600 Automotive Transient Generator
Teseq NSG 5600 Automotive Transient Generator Utilizing the only automotive EMC specific synchronized, multi-channel function generator (FG) in the world, the software in the Teseq/Schaffner NSG 5600 integrates the various system components seamlessly into the overall...
SKU: SCHA-NSG5600
Teseq PA 5840 Automotive Power Amplifier/Battery Simulator
Teseq PA 5840 Automotive Power Amplifier/Battery Simulator The Teseq PA 5840 Automotive Power Amplifier/Battery Simulator is designed to replace the vehicle battery in the test environment. The Teseq PA 5840 has unique features that fit a wide variety of EMC testing needs. The Teseq PA...
SKU: SCHA-PA5840-75
Teseq ProfLine 2100 Harmonics and Flicker Measuring System
Teseq ProfLine 2100 Harmonics and Flicker Measuring System The ProfLine 2100 system is a complete and cost effective harmonics and flicker measurement test system to the latest IEC/EN standards. The programmable power generation capability of up to 45 kVA (90 kVA and 145 kVA sources...
SKU: TESE-PROFLINE-2100
Teseq Profline 2103 3 kVA Harmonics & Flicker Measuring System
Teseq Profline 2103 3 kVA Harmonics & Flicker Measuring System The Teseq ProfLine 2103 3 kVA Harmonics & Flicker Measuring System is designed to measure harmonics & flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3, supporting testing on products consuming up to 11 Arms...
SKU: TESE-PROFLINE-2103
Teseq Reverberation Chamber 2XS
Teseq Reverberation Chamber 2XS The Teseq Reverberation Chamber 2XS is a modern EMC test environment in addition to the established methods like semi- or full-anechoic rooms, open area test sites or (G)TEM cells. They can be used for emission and immunity...
SKU: TESE-2XS
Teseq TEM Horn | For IEC 61000-4-39
Teseq TEM Horn | For IEC 61000-4-39 The Teseq TEM Horn is a horn antenna that generates homogeneous fields in the large frequency range from 600 MHz to 6 GHz. The TEM Horn is specifically designed to achieve IEC/EN 61000-4-39 which describes test methods unique...
SKU: TESE-TEM-HORN
Rent Now
Teseq (Schaffner) KEMA 801A Decoupling Clamp
Teseq (Schaffner) KEMA 801A Decoupling Clamp The Teseq (Schaffner) KEMA 801A Decoupling Clamp is a decoupling network and RF absorbtion clamp. This clamp allows EMC testing to be done without the use of a CDN, but with the advantages of decoupling from auxilliary...
SKU: TESE-KEMA801A
Rent Now
Teseq NSG 1007 AC & DC Power Sources
Teseq NSG 1007 AC & DC Power Sources The Teseq NSG 1007 AC & DC Power Source features a frequency range of 16 Hz – 1000 Hz and total power of 15,000 VA. With the capability to operate as both an AC and DC power source, the Teseq NSG 1007 is also a power...
SKU: TESE-NSG1007