Keysight PA2203A IntegraVision Power Analyzer | 4 Channels, 3-Phase AC
- Operates like an oscilloscope, but makes measurements like a power analyzer
- Achieve 0.05% basic accuracy for superior measurement integrity
- The PA2201A comes with 2 power channels for single phase measurements and analysis; the PA2203 has 4 power channels for 3-phase measurement and analysis
Danisense 6 Channel Current Transducer System
- Compact 19” rack mount 1U height
- Current transducers’ output signals (current or voltage) available via 4mm banana plugs
- Individual or serial access to calibration windings of all 6 transducers via 4mm banana plugs
Yokogawa WT1806E Precision Power Analyzer
- 6 inputs on a high-resolution display
- Harmonic analyses
- Guaranteed accuracy across a wide range
Keysight N6705A DC Power Analyzer | 600 W
- Easy to use R&D tool for sourcing and measuring DC voltage and current into the DUT
- Integrates capabilities of up to 4 Power Supplies, DMM, Scope, Arb and Data Logger
- Access all capabilities without programming; either use the front panel controls or the 14585A Control and Analysis Software
DaniSense DS600ID 600Arms Current Transducer
- 1ppm maximum linearity error
- Fluxgate loop technology
- DSUB 9 pin connection
Xitron 2503AH Series Power Analyzer
- 18-bit, 500 kHz sampling speed provides 0.05% basic accuracy
- Ultra-fast FFT’s per channel produce measurements in 10 ms
- 3000 V Peak, 50 Amp Peak internal shunt and Hall effect CT’s
NH Research S320 Power Supply Analyzer
- Level of flexibility normally associated with custom design instruments
- Ability to control DC power supplies along with DC dynamic loads within the same 5.25 in chassis
- Allows for power quality analysis
Danisense DS50ID 50Arms Current Transducer
- Linearity error maximum 8 ppm
- Fluxgate, closed loop compensated technology with fixed excitation frequency and second harmonic zero flux detection for best in class accuracy and stability
- Industry standard DSUB 9 pin connection
Voltech IEC555 Reference Impedance Network
Yokogawa WT3000 Precision Power Analyzer
- Basic accuracy: 0.01% of reading
- Basic power accuracy: 0.02% of reading
- 30A current input element
Yokogawa M1114BK IT 700-S Peak Current Transformer System IST
- 700 Amp Peak
- Current transfer ratio of 1750/1
- Functional for 1 to 6 CTs
Vitrek PA900 Precision Harmonic Power Analyzer
- Unprecedented range of capabilities
- Noise floor—as low as 1ppm vs 300ppm or more on competitive units
- Large, high-resolution color display: shows all the data you want with a touchscreen interface
Valhalla 2400 Wideband Spectrum Power Analyzer Series
- Suitable for stand-by, low power factor, and frequency inverter drivers
- IEEE, USB, RS-232, Ethernet, and Analog interfaces available
- Bright LCD with up to 10 measured values and wave form, bar graph, and trend plot visualizations
Yokogawa WT1800 Digital Power Analyzer
- Power accuracy of 0.% with 5MHz Bandwidth
- 0.1 Hz low-sped signal power measurement
- Current measurement from 100 μ A to 55 A
Yokogawa WT210 Single Input Digital Power Meter
- Basic power accuracy of 0.1%
- DC measurement, 0.5 Hz to 100 kHz power frequency range
- Compact design (half-rack size)
Yokogawa WT1600 Digital Power Meter
- A High-Precision, Wideband Digital Power Meter
- Up to Six-Phase Input on One Unit, Synchronized
- Measurements Between Two Units
DaniSense DL2000ID 2000Arms Current Transducer
- 1ppm linearity
- 6ppm offset
- Current output
Yokogawa WT332 Digital Power Meter 100 kHz, 2 Ch
- Basic accuracy of 0.1% of reading
- DC, 0.5 Hz to 100 kHz Frequency Range
- Peak Value of 450A or RMS value of 300 A
Yokogawa WT5000 Precision Power Analyzer
- Basic power accuracy of ±0.03%
- 10 MS/s, 1MHz power bandwidth
- Peak voltage of 2.5 kV or RMS of 1.5kV
Voltech PM3000 Universal Power Analyzer
Yokogawa WT1806 Power Analyzer
- DC Power Accuracy ±0.05%
- Voltage/Current Frequency Range: 5 MHz
- Voltage Range of 1.5 V to 1000 V
Valhalla 2800 Multiphase Power Analyzer Series
- Has 4 operating modes
- 18 bit resolution
- High accuracy at 10% full scale
Yokogawa WT300 Series Digital Power Meters
- Basic accuracy: 0.1% of Reading
- DC measurement: 0.5 Hz to 100 kHz frequency range
- Measures all AC and DC parameters
Yokogawa WT332E Digital Power Analyzer
- 3-phase, DC, 0.1 Hz – 100 kHz
- 15V – 600V, 5mA – 20A
- ±0.15% reading accuracy
Hioki U7001 Input Module | Precision Power Analyzer
- Input module for the PW8001 Precision Power Analyzer
- Basic accuracy for 50/60 Hz: Power ± 0.07%
- Measurement frequency band (DC) of 0.1 Hz to 1 MHz
