Yokogawa WT500 Precision Power Analyzer
- Voltage Crest Factor set to 3: 15V, 30V, 60V, 100V, 150V, 300V, 600V, 1000V Crest Factor set to 6: 7.5V, 15V, 30V, 50V, 75V, 150V, 300V, 500V
- Crest Factor set to 3: 15V, 30V, 60V, 100V, 150V, 300V, 600V, 1000V
- Crest Factor set to 6: 7.5V, 15V, 30V, 50V, 75V, 150V, 300V, 500V
Yokogawa WT3004E Precision Power Analyzer
- Basic power accuracy: 0.01% of reading
- Both 2 A and 30 A input elements can be installed in a single unit
- Good readability: 8.4-inch LCD and the range indicator LEDs
Voltech PM3000A Universal Power Analyzer
- 0.05% basic accuracy
- Universal application: single-phase, three-phase, and DC rectifier measurements
- Harmonic analysis of voltage current and power on each phase and neutral to the 99th harmonic
Yokogawa WT1806E Precision Power Analyzer
- 6 inputs on a high-resolution display
- Harmonic analyses
- Guaranteed accuracy across a wide range
Keysight PA2203A IntegraVision Power Analyzer | 4 Channels, 3-Phase AC
- Operates like an oscilloscope, but makes measurements like a power analyzer
- Achieve 0.05% basic accuracy for superior measurement integrity
- The PA2201A comes with 2 power channels for single phase measurements and analysis; the PA2203 has 4 power channels for 3-phase measurement and analysis
Hioki PW6001
- High noise resistance and stability
- Accurate measurement even when the load is characterized by large fluctuations
- TrueHD 18-bit resolution
Yokogawa WT230 Digital Power Meter
- Maximum input with assured accuracy: 26 A
- Basic accuracy: 0.1%
- DC measurement: 0.5 Hz to 100 kHz frequency range
Valhalla 2105 Wide-Range Power Analyzer
- Up to 20 A / phase direct (self-contained shunt)
- Expandable to 1000 amps
- True power measurements, VI cos Ø
DaniSense DS600ID 600Arms Current Transducer
- 1ppm maximum linearity error
- Fluxgate loop technology
- DSUB 9 pin connection
Yokogawa WT330 Digital Power Meter
- Basic accuracy: 0.1% of Reading
- DC measurement: 0.5 Hz to 100 kHz frequency range
- Measures all AC and DC parameters
Hioki U7005 Input Module | Precision Power Analyzer
- Input module for the PW8001 Precision Power Analyzer
- Basic accuracy for 50/60 Hz: Power ±0.03%
- Measurement frequency band (DC) of 0.1 Hz to 5 MHz
Yokogawa WT310HC Digital Sampling Power Analyzer
- Basic Accuracy of 0.1% of Reading
- Current Range: 1- 40A
- Voltage: 15-600 Volts RMS
Yokogawa WT333 Digital Power Meter 100 kHz, 3 Ch
- Basic accuracy of 0.1% of reading
- Low current measurement
- Wide current input ranges
Yokogawa WT3000 Precision Power Analyzer
- Basic accuracy: 0.01% of reading
- Basic power accuracy: 0.02% of reading
- 30A current input element
Yokogawa M1114BK IT 700-S Peak Current Transformer System IST
- 700 Amp Peak
- 19 Inch Rack Mount
- Functional for 1 to 6 CTs
Vitrek PA900 Precision Harmonic Power Analyzer
- Unprecedented range of capabilities
- Noise floor—as low as 1ppm vs 300ppm or more on competitive units
- Large, high-resolution color display: shows all the data you want with a touchscreen interface
Valhalla 2400 Wideband Spectrum Power Analyzer Series
- Suitable for stand-by, low power factor, and frequency inverter drivers
- IEEE, USB, RS-232, Ethernet, and Analog interfaces available
- Bright LCD with up to 10 measured values and wave form, bar graph, and trend plot visualizations
Yokogawa WT1800 Digital Power Analyzer
- Reduction of low power-factor error to 0.1% of apparent power (2/3 of previous model)
- Wide voltage and current range allowing direct input
- 0.1 Hz low-speed signal power measurement and max. 50 ms high-speed data collection
NH Research S320 Power Supply Analyzer
- Level of flexibility normally associated with custom design instruments
- Ability to control DC power supplies along with DC dynamic loads within the same 5.25 in chassis
- Allows for power quality analysis
Xitron 2503AH Series Power Analyzer
- 18-bit, 500 kHz sampling speed provides 0.05% basic accuracy
- Ultra-fast FFT’s per channel produce measurements in 10 ms
- 3000 V Peak, 50 Amp Peak internal shunt and Hall effect CT’s
Keysight N6705A DC Power Analyzer | 600 W
- Easy to use R&D tool for sourcing and measuring DC voltage and current into the DUT
- Integrates capabilities of up to 4 Power Supplies, DMM, Scope, Arb and Data Logger
- Access all capabilities without programming; either use the front panel controls or the 14585A Control and Analysis Software
Yokogawa WT1600 Digital Power Meter
- A High-Precision, Wideband Digital Power Meter
- Up to Six-Phase Input on One Unit, Synchronized
- Measurements Between Two Units
AEMC PowerPad IV Model 8345 Power Quality Analyzer
- Full compliance with IEC 61000-4-30 ed. 3.0 Class A functions
- Real-time display of color waveforms (5 voltage/4 current) from 1 cycle to 10/12 cycles
- Calculation of unbalance (current and voltage)
DaniSense DL2000ID 2000Arms Current Transducer
- 1ppm linearity
- 6ppm offset
- Current output
Yokogawa WT332 Digital Power Meter 100 kHz, 2 Ch
- Basic accuracy of 0.1% of reading
- Low current measurement
- Wide current input ranges