Siemens PTS-3 Secondary Injection Test Set Rentals

Siemens PTS-3 Secondary Injection Test Set

The Siemens PTS-3 Secondary Injection Test Set is designed for testing the static overcurrent tripping systems used on the LA line of low voltage power circuit breakers. The PTS-3 is compatible with original first generation Static Trip models to the latest versions of Static Trip II and LimiTrip trip units. It provides a means of testing the magnetic tripping actuator as well as the static trip device.

ABB BTSB Benchtop Trip Simulator for Breakers

Cutler Hammer MTK2000 Magnum Trip Unit Test Kit

Cutler Hammer 1232C50G05 Secondary Injection Test Kit

GE GTUTK20 EntelliGuard Digital Test Kit

Operation from a 100-240VAC 50/60 Hz Universal plug supply or two 9-volt alkaline batteries (batteries not supplied).
Provides power to the trip unit for viewing and setting setpoints with less than 15% load on the breaker or if the replaceable Trip Unit Battery needs replacing.
Verification of metering (phase simulation)

Cutler Hammer 70C1056G54 Circuit Breaker Test Set

Siemens PTS-5 Secondary Injection Test Set

Cutler Hammer 1287C56G02 Secondary Injection Test Kit

Cutler Hammer 140D481G02R DS Breaker Test Kit

Accommodate the lower power requirements of microprocessor
Permits checking of all Trip Unit phase input circuits
Pickup value accuracy ±10%

Merlin Gerin ME Secondary Injection Test Set

Schneider Electric / Square D UTS3 Circuit Breaker Universal Test Set

Self-test module (CBTMT)
Standard and full-function Micrologic Series B module (CBTMB) includes rating plug adapter
Power cord

GE TAK-TS1 Test Set

Schneider Electric / Square D S33595 Circuit Breaker Full Function Test Kit

Circuit breaker full function test kit
For rent at great rates
User-friendly applications

ABB 504 Power Shield Test Set

Madison Testing MadTest DSM4i1 Adapter

DS/DSII 9 pin connector 4 feet in length flexed umbilical cord
14 pin connector 4 feet in length flexed umbilical cord
2 pin auxiliary power module connector 6 feet in length flexed umbilical cord

Carriere STS100 Secondary Injection Relay Tester

Provides the following output ranges 0-2 Amps continuous 0-8 Amps for 24 seconds on, 120 Seconds off 0-10 Amps for 12 seconds on, 60 seconds off 0-12 Amps for 0.6 seconds on, 3 seconds
0-2 Amps continuous
0-8 Amps for 24 seconds on, 120 Seconds off

Cutler Hammer MTK1000 Magnum Trip Unit Test Kit

Compact design less than 2lbs in weight.
Pushbutton operated faceplate display with durable, polycarbonate protective film.
Two line, digital LCD display screen with antiglare coating.

Siemens WLTS Secondary Current Injection Test Set

Madison Testing DMR5I1 Multifunction Trip Unit Adapter

Easy connect to any configuration
Budget-friendly solution for testing aftermarket Digitrip RMS retrofitted trip units
Offers 32 VDC and 120 VAC power source for OPTIM 750 & 1150, and GO3 base unit

General Electric TVTS1 Secondary Injection Test Set

TP4VT
TP9VT
T4VT

Cutler Hammer 140D481G03 DS Breaker Test Kit

Short delay
Ground test
Circuit selector

Siemens PTS-4 Portable Test Set

Input - 120 Volts, 50 or 60 Hz, 15 Amps Maximum
Output - 0 to 120 Volts, 15 Amps Maximum
Maximum continuous current on high scale 1.0 Amp

GE TVRMS2 Digital Test Kit

Operation from 120 Vac or six D-cell batteries.
Trip Unit testing without de-energizing the breaker or removing the Trip Unit from the breaker.
Verification of switch settings on Power+, RMS-9, and Epic Trip Units.

Cutler Hammer 1232C50G10 Secondary Injection Test Kit

Federal Pioneer DDT-USD Secondary Current Injection Relay Tester

Battery powered, portable test unit.
Completely self contained.
Capable of testing in AC and DC modes.