AEMC PowerPad IV Model 8345 Power Quality Analyzer
- Full compliance with IEC 61000-4-30 ed. 3.0 Class A functions
- Real-time display of color waveforms (5 voltage/4 current) from 1 cycle to 10/12 cycles
- Calculation of unbalance (current and voltage)
Valhalla 2105 Wide-Range Power Analyzer
- Up to 20 A / phase direct (self-contained shunt)
- Expandable to 1000 amps
- True power measurements, VI cos Ø
Valhalla 2400 Wideband Spectrum Power Analyzer Series
- Suitable for stand-by, low power factor, and frequency inverter drivers
- IEEE, USB, RS-232, Ethernet, and Analog interfaces available
- Bright LCD with up to 10 measured values and wave form, bar graph, and trend plot visualizations
Xitron 2503AH Series Power Analyzer
- 18-bit, 500 kHz sampling speed provides 0.05% basic accuracy
- Ultra-fast FFT’s per channel produce measurements in 10 ms
- 3000 V Peak, 50 Amp Peak internal shunt and Hall effect CT’s
Yokogawa 2505 Digital AC Meter
Yokogawa 2533-13 Digital Power Meter
- Three Displays measures V, A, W, V, A, VA, var, PF
- Measures single phase, 3-phase, 3-wire, 3-phase, 4-wire power systems
- Frequency range of 10 Hz to 20 kHz
Xitron 2553 Three Phase Power Analyzer, 20 mHz - 80 kHz
- Low Cost/High Performance
- Measures and displays power, frequency, harmonics, THD, CF, K-Factor, Triplens & Inrush
- Up to 1500 volts peak, 40 amps peak internally & up to 10,000 amps with the use of External Current Transducers
Valhalla 2800 Multiphase Power Analyzer Series
- Has 4 operating modes
- 18 bit resolution
- High accuracy at 10% full scale
Xitron 2801 Advanced Power Analyzer
- Highest Performance-to-Cost ratio in the industry
- Up to 2000V peak and 150A peak measurable internally (external CT capable)
- Base accuracy <0.08%. Current and voltage accuracies specified to less than 1mArms and 1Vrms respectively (<0.2%)
Xitron 2802 Two Channel Power Analyzer
- Highest Performance-to-Cost ratio in the industry
- Base accuracy <0.08%. Current and voltage accuracies specified to less than 1 mArms and 1 Vrms respectively (<0.2%)
- 2000 Vpk and 150 Apk measurable internally (external CT capable)
Danisense 6 Channel Current Transducer System
- Compact 19” rack mount 1U height
- Current transducers’ output signals (current or voltage) available via 4mm banana plugs
- Individual or serial access to calibration windings of all 6 transducers via 4mm banana plugs
DaniSense DL2000ID 2000Arms Current Transducer
- 1ppm linearity
- 6ppm offset
- Current output
Danisense DS50ID 50Arms Current Transducer
- Linearity error maximum 8 ppm
- Fluxgate, closed loop compensated technology with fixed excitation frequency and second harmonic zero flux detection for best in class accuracy and stability
- Industry standard DSUB 9 pin connection
DaniSense DS600ID 600Arms Current Transducer
- 1ppm maximum linearity error
- Fluxgate loop technology
- DSUB 9 pin connection
Voltech IEC555 Reference Impedance Network
Yokogawa M1114BK IT 700-S Peak Current Transformer System IST
- 700 Amp Peak
- 19 Inch Rack Mount
- Functional for 1 to 6 CTs
Keysight N6705A DC Power Analyzer | 600 W
- Easy to use R&D tool for sourcing and measuring DC voltage and current into the DUT
- Integrates capabilities of up to 4 Power Supplies, DMM, Scope, Arb and Data Logger
- Access all capabilities without programming; either use the front panel controls or the 14585A Control and Analysis Software
Fluke Norma 4000, N4K High Precision Power Analyzer
- Number of phases: 1 or 3
- Bandwidth: dc to 3 MHz or dc to 10 MHz depending on input module
- Basic Accuracy: 0.2%, 0.1% or 0.03% depending on input modules
Fluke Norma 5000, N5K High Precision Power Analyzer
- Number of phases: 3, 4 or 6
- Bandwidth: dc to 3 MHz or dc to 10 MHz depending on input module
- Basic Accuracy: 0.2%, 0.1% or 0.03% depending on input modules
Keysight PA2203A IntegraVision Power Analyzer | 4 Channels, 3-Phase AC
- Operates like an oscilloscope, but makes measurements like a power analyzer
- Achieve 0.05% basic accuracy for superior measurement integrity
- The PA2201A comes with 2 power channels for single phase measurements and analysis; the PA2203 has 4 power channels for 3-phase measurement and analysis
Tektronix PA4000 Power Analyzer, DC - 1 MHz, 30 ARMS, 1000 VRMS
- 1 to 4 Input Modules allows several configurations to match your application
- High measurement accuracy of 0.04% (basic voltage & current accuracy) for demanding test requirements
- Dual internal current shunts for each module maximize accuracy for high- and low-current measurements
Vitrek PA900 Precision Harmonic Power Analyzer
- Unprecedented range of capabilities
- Noise floor—as low as 1ppm vs 300ppm or more on competitive units
- Large, high-resolution color display: shows all the data you want with a touchscreen interface
Voltech PM1000 AC Power Analyzer
- Easy to use-fully autoranging for voltage, current and frequency
- Accurate measurements of real power (W) and apparent power (VA) even with distorted waveforms
- Displays real power factor
Voltech PM3000 Universal Power Analyzer
Voltech PM3000A Universal Power Analyzer
- 0.05% basic accuracy
- Universal application: single-phase, three-phase, and DC rectifier measurements
- Harmonic analysis of voltage current and power on each phase and neutral to the 99th harmonic
Voltech PM3000ACE Precision Power Analyzer
- Intuitive front-panel or Windows software operation
- High 0.05% basic accuracy
- Wide bandwidth measurements, DC and 0.1Hz to 1MHz
Voltech PM6000 Multi-Phase Power Analyzer
- Up to six channels configurable as required, for example AC input plus 5 DC outputs or three-phase input and output.
- Basic accuracy: 0.02% of reading
- Accurate on all waveforms.
Newtons4th PPA3500 Series 1 to 6 Phase Power Analyzers
- High Speed Power Measurement - 5ms Datalog Interval
- 1MHz Wideband Frequency Response
- High Accuracy
Hioki PW6001
- High noise resistance and stability
- Accurate measurement even when the load is characterized by large fluctuations
- TrueHD 18-bit resolution
Hioki PW8001-01 Precision Power Analyzer
- Accurate capture of power fluctuations caused by high-speed switching
- Up to 8 power channels optimizing your measurement
- ​Safe evaluation of increasingly high-voltage power conditioners
NH Research S320 Power Supply Analyzer
- Level of flexibility normally associated with custom design instruments
- Ability to control DC power supplies along with DC dynamic loads within the same 5.25 in chassis
- Allows for power quality analysis
Hioki U7001 Input Module | Precision Power Analyzer
- Input module for the PW8001 Precision Power Analyzer
- Basic accuracy for 50/60 Hz: Power ± 0.07%
- Measurement frequency band (DC) of 0.1 Hz to 1 MHz
Hioki U7005 Input Module | Precision Power Analyzer
- Input module for the PW8001 Precision Power Analyzer
- Basic accuracy for 50/60 Hz: Power ±0.03%
- Measurement frequency band (DC) of 0.1 Hz to 5 MHz
Yokogawa WT1600 Digital Power Meter
- A High-Precision, Wideband Digital Power Meter
- Up to Six-Phase Input on One Unit, Synchronized
- Measurements Between Two Units
Yokogawa WT1800 Digital Power Analyzer
- Reduction of low power-factor error to 0.1% of apparent power (2/3 of previous model)
- Wide voltage and current range allowing direct input
- 0.1 Hz low-speed signal power measurement and max. 50 ms high-speed data collection
Yokogawa WT1803 Power Analyzer
Yokogawa WT1806 Power Analyzer
- High-precision, wide-range, fast-sampling, simultaneous harmonic measurement High-precision, wide-range, fast-sampling, simultaneous harmonic measurement.
- A wide variety of communication and data saving functions.
- Measurement data can be displayed on a single screen.
Yokogawa WT1806E Precision Power Analyzer
- 6 inputs on a high-resolution display
- Harmonic analyses
- Guaranteed accuracy across a wide range
Yokogawa WT200-C1 Digital Power Meter
- Basic power accuracy: 0.1%
- DC measurement, 0.5 Hz to 100 kHz power frequency range
- Compact design (half-rack size)
Yokogawa WT210 Single Input Digital Power Meter
- Basic power accuracy of 0.1%
- DC measurement, 0.5 Hz to 100 kHz power frequency range
- Compact design (half-rack size)
Yokogawa WT230 Digital Power Meter
- Maximum input with assured accuracy: 26 A
- Basic accuracy: 0.1%
- DC measurement: 0.5 Hz to 100 kHz frequency range
Yokogawa WT300 Series Digital Power Meters
- Basic accuracy: 0.1% of Reading
- DC measurement: 0.5 Hz to 100 kHz frequency range
- Measures all AC and DC parameters
Yokogawa WT3000 Precision Power Analyzer
- Basic accuracy: 0.01% of reading
- Basic power accuracy: 0.02% of reading
- 30A current input element
Yokogawa WT3004E Precision Power Analyzer
- Basic power accuracy: 0.01% of reading
- Both 2 A and 30 A input elements can be installed in a single unit
- Good readability: 8.4-inch LCD and the range indicator LEDs
Yokogawa WT310 Digital Power Meter
- Basic accuracy: 0.1% of Reading
- DC measurement: 0.5 Hz to 100 kHz frequency range
- Measures all AC and DC parameters
Yokogawa WT310HC Digital Sampling Power Analyzer
- Basic Accuracy of 0.1% of Reading
- Current Range: 1- 40A
- Voltage: 15-600 Volts RMS
Yokogawa WT330 Digital Power Meter
- Basic accuracy: 0.1% of Reading
- DC measurement: 0.5 Hz to 100 kHz frequency range
- Measures all AC and DC parameters
Yokogawa WT332 Digital Power Meter 100 kHz, 2 Ch
- Basic accuracy of 0.1% of reading
- Low current measurement
- Wide current input ranges
Yokogawa WT333 Digital Power Meter 100 kHz, 3 Ch
- Basic accuracy of 0.1% of reading
- Low current measurement
- Wide current input ranges
Yokogawa WT500 Precision Power Analyzer
- Voltage Crest Factor set to 3: 15V, 30V, 60V, 100V, 150V, 300V, 600V, 1000V Crest Factor set to 6: 7.5V, 15V, 30V, 50V, 75V, 150V, 300V, 500V
- Crest Factor set to 3: 15V, 30V, 60V, 100V, 150V, 300V, 600V, 1000V
- Crest Factor set to 6: 7.5V, 15V, 30V, 50V, 75V, 150V, 300V, 500V
Yokogawa WT5000 Precision Power Analyzer
- Unmatched basic power accuracy of ±0.03%
- 10 MS/s, 1MHz power bandwidth, 18 bit resolution enabled by Yokogawa isoPRO™ fiber optic isolation technology
- Precision current measurement guaranteed by innovative symmetric coaxial shunt design