Keysight N5230C PNA-L Microwave Network Analyzer
- 300 kHz – 20 GHz
- IF Bandwidth: 10 Hz
- up to 122 dB dynamic range standard
Rohde & Schwarz ZNB8 Vector Network Analyzer
- Wide dynamic range of up to 140 dB
- Short sweep times of 4 ms for 401 points
- High temperature stability of typ. 0.01 dB/°C
Keysight N5225B PNA Microwave Network Analyzer
- Frequency Range | 900 Hz-50 GHz
- Dynamic Range | 127 dB
- Harmonics | -60 dBc
Keysight E5071C ENA Vector Network Analyzer, 9 kHz - 20 GHz
- Wide frequency coverage: 9 kHz to 20 GHz
- Low trace noise: <0.004 dB rms at 70 kHz IFBW
- Wide dynamic range: >123 dB
Keysight 8722ES Vector Network Analyzer, 50 MHz - 40 GHz
- 50 MHz to 40 GHz
- Up to 110 dB of dynamic range
- Excellent measurement accuracy
Doble M5500 Sweep Frequency Response Analyzer
- 1045 points (Default)
- Up to 5000 points (Extended Range)
- Lightweight and rugged portable test instrument
Tektronix TTR500 Series Vector Network Analyzer (VNA)
- Full 2-port 2-path S-parameter measurement (S11, S21, S12, S22) in a variety of formats.
- Complete vector network analysis capability with Tektronix VectorVu-PC™ software.
- Built-in bias tee accessible on both ports to bias active devices.
Keysight N9951A FieldFox Handheld Microwave Analyzer
- Standard model includes cable and antenna analyzer.
- Save time by measuring DTF and TDR in the same sweep.
- Measure all four S-parameters simultaneously.
Keysight FieldFox N9923A Network Analyzer (Agilent N9923A)
- Built-in QuickCal technology enables calibration without a cal kit
- Best measurement stability over time and temperature
- Industry´s only handheld network analyzer with MIL PRF 28800F Class 2 compliance with no exceptions
Megger FRAX 101 Sweep Frequency Response Analyzer
- Smallest and most rugged FRA instrument in the industry
- Highest possible repeatability by using reliable cable practice and high-performance instrumentation
- Fulfills all international standards for SFRA measurements
OMICRON Bode 100 Vector Network Analyzer 1 Hz - 40 MHz
- Swept S-parameters in the 50 system
- Reflection coefficient and return loss
- Insertion loss of filters
Anritsu MS2026A Vector Network Analyzer
- Frequency Range: 2 to 6000 MHz
- Frequency Accuracy: 25 ppm
- Frequency Resolution: 10 kHz
Keysight 85093C RF Electronic Calibration (ECal) Module | 3.5mm
- 300 kHz to 9 GHz frequency range
- Fast full two-port calibration with a single connection
- Simple non-insertable device calibration
Tettex Instruments FRA 5310 Transformer Frequency Response Analyzer
- High measurement reliability and reproducibility due to active probes design from 10Hz - 10MHz.
- High signal-to-noise ratio due to output voltage 1V peak to peak (24V)
- Ease of use due to automated test software, large color touch screen interface and remote start button.
Keysight E5061B ENA Vector Network Analyzer
- Cables
- Amplifiers
- Resonators
Keysight E5071B ENA RF Network Analyzer | 300 kHz to 8.5 GHz
- Fast multiport measurements: 9.6 µs/point
- High accuracy 125dB dynamic range1 and 0.001 dB rms trace
- Integrated 2, 3, or 4 test ports
Keysight N5227B PNA Microwave Network Analyzer 10 MHz to 67 GHz
- PNA Network analyzer software tools for investigating, characterizing & troubleshooting designs
- Advanced Design System (ADS): complete, integrated set of fast and accurate circuit & system simulators
- Configurable test set
Keysight N5234B PNA Microwave Network Analyzer 10 MHz to 43.5 GHz
- PNA Network analyzer software tools for investigating, characterizing & troubleshooting designs
- Advanced Design System (ADS): complete, integrated set of fast and accurate circuit & system simulators
- Configurable test set
Keysight E8361C PNA Microwave Network Analyzer
- 10 MHz to 67 GHz frequency range
- 94 dB dynamic range and <0.006 dB trace noise (specified to 67 GHz, with operation to 70 GHz)
- <26 usec/point measurement speed, 32 channels, 20,001 points
Keysight N9928A FieldFox Handheld Microwave Vector Network Analyzer, 26.5 GHz
- Configure as a full, two-port VNA, time-domain reflectometer, vector voltmeter, cable and antenna analyzer, and more
- Measure all four S-parameters simultaneously with a single connection and up to 95 dB of dynamic range
- Perform accurate testing with QuickCal, full two-port unknown thru Cal, and Thru, Reflect, Line (TRL) calibration in the field
Keysight N5227A PNA Network Analyzer 10 MHz - 67 GHz
- 10 MHz to 67 GHz
- 2-ports with single source or 4-ports with two built-in sources
- 128 dB system and 133 dB receiver dynamic range, 32,001 points, 200 channels, 15 MHz IF bandwidth
Keysight PNA Network Analyzer Series
- PNA Network analyzer software tools for investigating, characterizing & troubleshooting designs
- Advanced Design System (ADS): complete, integrated set of fast and accurate circuit & system simulators
- Configurable test set
Keysight N5232B PNA Microwave Network Analyzer 10 MHz to 20 GHz
- PNA Network analyzer software tools for investigating, characterizing & troubleshooting designs
- Advanced Design System (ADS): complete, integrated set of fast and accurate circuit & system simulators
- Configurable test set
Keysight E8357A PNA Vector Network Analyzer 300 kHz - 6 GHz
Keysight N5242B PNA-X Microwave Network Analyzer
- Frequency Range: 900 Hz/10 MHz - 26.5 GHz
- Maximum Output Power (at 20 GHz): +15 dBm
- Harmonics: -51 dBc typical; -60 dBc typical