Dynatel 505 Portable Cable and Conductor Identifier
3M Dynatel 2573-iD Cable/Pipe/Fault and Marker Locator
- Trace view mapping display mode
- 6 active frequencies for direct connect
- 4 induction frequencies with maximum allowed output power
3M Dynatel 2573 Cable / Pipe / Fault Locator
- Trace view mapping display mode
- 6 active frequencies for direct connect
- 4 induction frequencies with maximum allowed output power
Dynatel 2273M
- Locate cable and pipe path
- Measure cable/pipe, or Sonde depth with the push of a button
- Display relative signal current in the cable or pipe
3M Dynatel 2273 Pipe / Cable / Fault Locator
- Four operator-selectable frequencies
- Simultaneous signals
- Fault-locate/cable-locate signals applied simultaneously
Dynatel 2250M Cable/Fault Locater System
- A easy-to-use system that requires very little operator training
- Trace a pipe or cable and locate markers along the way
- M-iD versions locate and read/write to all EMS-RFiD markers
3M Dynatel 2250 Advanced Cable Locator
- Four active frequencies
- Graphic display to distinguish between targeted cable and other cables in congested area
- Passive frequencies for power, cathodic protection systems and CATV
Dynatel 1420-iD Electronic Marker System Locator
- Large backlit, high-resolution graphic display
- Locator PC tools software
- PC interface via standard RS232/USB
Megger EZ-Restore Cable Fault Locator
- Has back-feed alert
- Weighs less than 48.5 lbs
- Offers unique USB load
High Voltage Inc. CDS-2010U Cable Fault Locator
- Combination Hipot, Burner and Fault Locator
- Constant energy at each output voltage setting
- Adjustable thump (impulse) repetition rate, from 6 – 10 seconds
Amprobe UAT-620 Underground Utilities Locator Kit
- Multiple tracing modes allow you to locate and trace energized and de-energized utilities in a variety of applications.
- The intuitive Transmitter automatically chooses the correct locating function based on the connected accessory and includes selectable 8/33 kHz frequencies.
- The Receiver’s high-contrast display allows for clear viewing in full sunlight and features an automatic backlight for shaded and dark areas.
Megger PFL32M1500-EN Portable Cable Fault Location System
- Portable, rugged fault locating systems
- HV insulation testing to 20 kV
- Proof/burn up to 20 kV, 115 mA
Megger MGFL100 Battery Ground Fault Locator
- Alarms when the real fault is identified
- Direct measurement of resistance and stray capacitance
- Direct measurement of fault current and leakage current
Radiodetection RD8100 Underground Cable Locator
- Detect all commonly used RF utility markers with automatic depth estimation
- RD Map cell-phone app for the real-time creation of detailed buried utility maps
- Combined mode to scan simultaneously for cables, pipes and RF markers
Hipotronics CF30-8-A Cable Fault Locator / Thumper
- Self-Contained Unit Features Proof Tester, Burner and Thumper in One
- Burn Currents to 50 mA
- Impulse Energies of up to 900 J
Amprobe AT 5005 Underground Cable / Pipe Locator System
- Locates underground energized and de-energized wires, cables and pipes, eliminates exploratory digging in parking lots or under floors for buried pipes and wires
- Signal Select and Distortion Alert icon indicates clean signal of the traced line, versus "ghost" and "return" path signals coming from the neighboring lines
- Three testing modes for best accuracy: Passive Power Mode (50, 60, 100 and 120 Hz) – tracing energized lines conducting current Passive Radio Mode (RF) – using surrounding radio
Schonstedt XT-512 Underground Pipe and Cable Locator
- Operates on 512 Hz Frequency mode
- Passive detection of 50 Hz or 60 Hz, and sonde
- One button depth measurement
Megger SMART THUMP ST16 Portable Cable Fault Location System
- Delivers 1500 J at 8/16 kV
- 16-kV DC high voltage proof test and insulation resistance test
- Easy Go automatic test sequence to proof test, prelocate and pinpoint
Megger SG15-1150M HV Cable Fault Locating System
- Dual stage cap 1150 J @ 7.5/15 kV
- Internal filter for arc reflection method
- Internal coupler for surge pulse (ICE) method
Radiodetection RD7200 Cable & Pipe Locator
- Speed, accuracy, and reliable performance
- Easy to setup and use
- High performance audio system and vibration alerts for noisy environments
Amprobe AT-3500 Underground Cable Locator
- Locates underground energized and de-energized wires, cables, and pipes
- Three testing modes for best accuracy Passive power (50/60 Hz) Passive radio (RF) Active T-3500 signal generator with induction mode directly connected to the cable with test leads or
- Passive power (50/60 Hz)
Dynatel 573 Sheath Fault/Cable Locator
Dynatel 573DL Cable Fault Locator
Hipotronics PTC-2 Cable ID & Phase Tracer
- Transmitter Continuously adjustable output current Low operating voltage Output ammeter Input circuit breaker switch with "on" pilot light
- Continuously adjustable output current
- Low operating voltage
Megger MTDR1 Single-Phase Time Domain Reflectometer
- Multiple fault locating methods
- Auto-ranging and auto-fault distancemodes
- Single-phase, two-channel transceiver