Related Products

AEMC H111 Hipot / Insulation Resistance Tester

  • No load setup of trip current and output voltage
  • Large 24 x 2 character LCD with adjustable backlight
  • Quick and easy setup from the front panel

AEMC H216 Hipot / Insulation Resistance Tester

  • No load setup of trip current and output voltage
  • Large 24 x 2 character LCD with adjustable backlight
  • Quick and easy setup from the front panel

Quadtech Guardian 1030 Multi-Purpose AC/DC/IR Hipot Tester

Chroma 19032 Sentinel I Electrical Safety Analyzer

  • Floating output, compliance with EN50191
  • AC/DC/IR/GB/LC five instruments in one
  • Function test up to 20A

Chroma 19035 Wound Component EST Scanners

  • 5kVAC & 6kVDC Hipot Test
  • 1MΩ~50GΩ/5kV IR Test
  • 10mΩ~100kΩ DCR Test

Chroma 19036 Wound Component EST Analyzer

  • 5 in 1 (10 channels) composite analyzer (ACWV/DCWV/IR/Impulse/DCR)
  • Hi-pot test 5kVac / 6kVdc HSCC (High Speed Contact Check) 500 VA output
  • 5kVac / 6kVdc

Chroma 19052 AC/DC/IR Hipot Tester

  • AC/DC/IR 3 in 1 hipot tester
  • AC 5kV and DC 6kV output
  • 1kV insulation resistance test

Chroma 19054 AC/DC/IR/SCAN Hipot Tester

  • AC/DC/IR 3 in 1 hipot tester
  • AC 5kV and DC 6kV output
  • 1kV insulation resistance test

Chroma 19055/19055-C Series Hipot Analyzers 500 VA

  • 500 VA output rating
  • Floating output complies with EN50191
  • Corona Discharge Detection (CDD, option)

Chroma 19057 Hipot Analyzer

  • 10 kV AC & 20 kV DC withstand voltage test
  • 0.1 MΩ - 50 GΩ insulation impedance test
  • BDV (BreakDown Voltage test)

Chroma 19071 AC Hipot Tester

  • Ground fault interruption shutdown the instrument when imbalance current > 0.5mA, provide the highest protection capability
  • TUV approved
  • CE Certified

Chroma 19073 AC/DC/IR Hipot Tester

  • Ground fault interruption shutdown the instrument when imbalance current > 0.5mA, provide the highest protection capability
  • TUV approved
  • CE Certified

Chroma 19572 Ground Bond Tester

  • TUV approved
  • CE certified
  • High current ground continuity testing up to 45Amps

SCI 266 60 Amp AC Ground Bond Tester

  • 0 - 150 mΩ for 30.1 - 60.0 A
  • 0 - 200 mΩ for 15.1 - 30.0 A
  • 0 - 600 mΩ for 3.0 - 15.0 A

Associated Research 3140 40 Amp Ground Bond Tester

  • Patented VERI-CHEK feature prompts users through steps to validate the instrument's operation
  • Graphic LCD provides intuitive menu system to simplify the entire testing process from set-up to results
  • Patented CAL-ALERT feature alerts the operator that the tester is due for re-calibration

Associated Research 3160 Hyamp III Ground Bond Tester

  • Patented VERI-CHEK® feature prompts users through steps to validate the instrument's operation
  • Graphic LCD provides intuitive menu system to simplify the entire testing process from set-up to results
  • Patented CAL-ALERT® feature alerts the operator that the tester is due for re-calibration PLC Remote Control allows operators to remotely control the Ground Bond tester

Associated Research 3500D AC Hipot w/Continuity Test Set

Associated Research 3565D AC / DC Hipot Ground Continuity Tester

  • For production line safety agency compliance testing
  • Microprocessor digital design with software friendly menuing
  • Electronic ramp & dwell

Associated Research 3665 Dielectric Withstand Tester

  • Tamper proof front panel controls to limit user access
  • User selectable output voltage & frequency
  • Complete user configurable system capability

Associated Research 5030DT Hyamp II 31A Ground Bond Tester

Associated Research 510L LineChek Line Leakage Tester

Associated Research 5400DT Hipot AC Dielectric Withstand Tester

  • 0 to 5KVAC, 20mA hipot tester
  • 5002D High Current Ground Bond Continuity Tester
  • 3 to 30amp output.

Associated Research 5450DT AC/DC Hipot/Ground Tester

Associated Research 5560DT Hypot PLUS Dielectric Withstand Tester

  • Microprocessor Digital Design with Software Friendly Menuing
  • Tamper Proof Front Panel Controls
  • Enhanced PLC & Ten Volt Analog Signal for Automated Applications

Quadtech Guardian 6000 Plus Electrical Safety Analyzer

  • Twin Port - Simultaneous Hipot & GB
  • Programmable Output Voltage to 5KV AC and 6KV DC
  • Ground Bond Testing to 30A AC (to 40A with Optional Transformer)

Associated Research Linechek 620L Fully Automated Line Leakage Tester

Associated Research 6550DT HypotUltra

Associated Research 6554SA Quadchek Electrical Safety Analyzer

Associated Research 7520DT AC Hipot Ground Continuity Tester

  • Input Voltage: 115/230 VAC, ± 15 %, Single Phase, User Selection
  • Input Frequency: 47 - 63 Hz
  • Output Rating: 5 KV @ 20 mA AC

Associated Research 7550DT HypotULTRA Electrical Safety Analyzer

Associated Research 7564SA Quadchek II AC/DC Hipot

  • GPIB (IEEE-488), RS-232 or Printer Interfaces
  • Available in 500 VA Output Versions
  • Optional Built-In & External Scanner Capabilities

Associated Research 7704 AC/DC Hipot, Insulation Resistance

  • Patented SmartGFI® safety circuit protects the operator from shock hazards
  • 50 memories that can be stored and recalled. Multi-function models include 8 steps per memory
  • Patented RAMP HI and CHARGE LO systems for more effective DC Hipot testing

Associated Research 7850 HYPOTULTRA Dielectric Analyzer

  • AC Hipot 0-5000VAC Leakage Current Limits = 0.000-30.00mA Output Frequency = 50/60Hz
  • 0-5000VAC
  • Leakage Current Limits = 0.000-30.00mA

Associated Research Omnia 8006 Hipot Tester

  • Built-in Cal-Alert
  • Built-in Real Current measurement
  • Dual function Ground Bond and Ground Continuity

Associated Research 8104 Hipot/Ground Tester

  • Dielectric Withstand Test Mode Output Rating: 5 kV @ 40mA AC and 20mA DC Voltage Setting Range: 0-5000 V AC; 0-5000 V DC Resolution: 1 V Accuracy: ± (2% of setting + 5
  • Output Rating: 5 kV @ 40mA AC and 20mA DC
  • Voltage Setting Range: 0-5000 V AC; 0-5000 V DC Resolution: 1 V Accuracy: ± (2% of setting + 5 volts)

Associated Research 8106 Electrical Safety Compliance Analyzer

  • Ethernet Communication Card
  • USB/RS-232, & GPIB Interfaces
  • Data Storage Card

Associated Research OMNIA II 8206 Electrical Safety Compliance Analyzer

Vitrek 930i Ground Bond Tester/Ground Integrity Analyzer

  • 3 to 30 Amp Test Current - meets a wide variety of regulatory test specifications
  • Password Protected Test Routine Storage
  • Frequency Synthesis 50-400Hz

Vitrek 944i 5kV AC, 6 kV DC Hipot, IR & Ground Continuity Tester

  • AC Hipot to 5KV,10KV Optional
  • DC Hipot to 7KV with 14KV Optional
  • Earth Continuity Testing 1mΩ

Vitrek 955i Ultra-High Performance Hipot Tester

  • High power output
  • Wide range of built-in voltage capabilities
  • Reliable electrical safety tester

Vitrek 95X Series Hipot Testers

  • Highest Level of Operator Safety
  • High Power Output
  • Wide Range of built-in Voltage Capabilities

Fluke Biomedical Ansur Test Automation Software

  • Allows creating and managing custom test protocols electronically to eliminate dependence on service manuals
  • Guides users through stepwise testing process to ensure standardized testing and to minimize training
  • Generates test report (PDF or MTR) per requirements with needed level of data to ensure compliance

Fluke ESA620 Electrical Safety Analyzer

  • Superior compliance with multiple standards: IEC60601:2005, EN62353, VDE 751, ANSI/AAMI ES1:1993, NFPA-99, AN/NZS 3551, IEC61010
  • Three test loads
  • Expanded leakage ranges through 10,000 μA

QuadTech Guardian 5000 AC/DC Hipot Tester

  • Programmable output voltage to 5KV AC and 6KV DC
  • Ground Bond Testing to 30A AC with adjustable limit
  • Multi-point Scanner Option for High Voltage Switching of up to 64 Points

QuadTech Guardian 6000 Electrical Safety Analyzer

  • Programmable output voltage to 5KV AC and 6KV DC
  • Ground Bond Testing to 30A AC with Adjustable Limit
  • Insulation Resistance Measurements from 100kΩ to 50GΩ

Quadtech Guardian 6100 Plus Safety Analyzer

  • Twin Port - Simultaneous Hipot & GB
  • Built-in 20A Hipot/Line Leakage Scanner
  • Output Voltage to 5 kV AC and 6kV DC

Associated Research HYAMP Series Ground Bond Tester

  • PLC Remote
  • Remote Safety Interlock
  • Data Transfer

Associated Research OMNIA II 8207 Electrical Safety Compliance Analyzer

  • Built-in AC Power Source
  • 4-Wire Measurement
  • Arc Detection

Fluke QA-ES III Electrosurgical Tester and Analyzer

  • Test all critical ESU functions with precise power, current, frequency, crest factor and load resistance ranges
  • Collect measurements in single and continuous mode
  • Connect wirelessly via Bluetooth for easy record retrieval without interference or limitation by cables and wires*

QuadTech Sentry 50 High Current Ground Bond Tester

  • Adjustable Output Current from 1A to 30A AC
  • Adjustable High and Low Resistance Limits
  • Adjustable No-Load Voltage Limit

QuadTech Sentry 50 Plus 30 Amp Ground Bond Tester

  • Programmable Output Current from 3A to 30A AC
  • Programmable Source Voltage from 1.0 to 8.0V rms
  • Resistance Measurements from 0.1mW to 510mW

Kikusui TOS1200 Withstanding Voltage Tester Current Calibrator

  • Model TOS1200 Withstanding Voltage Tester Current Calibrator: For calibration of current sensitivity of withstanding voltage testers
  • Calibration of Leakage Current Detection Sensitivity As a result of containing an internal test load resistor, the TOS1200 enables switching of ammeter sensitivity and load resistance values
  • Direct Reading of Error from Error Display Scale. The main scale consists of an error display scale ranging from -10% to +10% around a central full scale value. Thus, if the leakage current detection

Kikusui TOS5050 Withstanding Voltage Tester

  • AC use only (0 to 5 kV)
  • Large color display
  • Digital voltmeter and ammeter

Kikusui TOS5051 AC/DC Hipot Tester

  • AC/DC output (0 to 5 kV)
  • Large color display
  • Digital voltmeter and ammeter

Kikusui TOS5101 Hipot Tester | 10 kV

  • Complies with various safety standards
  • AC/DC output (0 to 10 kV)
  • Large color display

Kikusui TOS5300 Series AC/DC Hipot Testers

  • Reduces tact time; capable of setting the test time from 0.1s
  • High-efficiency PWM switching amplifier provides a stable output of high voltage without being affected by AC line variation
  • Rise/fall time control function of the applied voltage

Kikusui TOS6100 Earth Continuity Tester

  • 0 to 0.12 ohms/0 to 0.6 ohms
  • Test current can be set to any desired value (3 to 30A)
  • Equipped with various signal output terminals

Kikusui TOS6200 Earth Continuity Tester

  • Making a test current constant - A test current for earth continuity testing has been made constant. Thus, the test current does not need to be reset even in the face of fluctuating resistance values
  • High accuracy - The tester is equipped with an ammeter of ±(1% of reading +0.2 A), a voltmeter of ±(1% of reading +0.02 V), and an ohmmeter of ±(2% of reading +0.003 ohms) that
  • Offset canceling function - The tester is provided with an offer canceling function that cancels resistance values, such as the contact resistance at alligator-clip and the resistance of measurement

Kikusui TOS8700 AC/DC Hipot Tester

Kikusui TOS8750 AC/DC Hipot Tester

Kikusui TOS8850 W/I Auto Tester

Kikusui TOS9201 Hipot Tester with Insulation Resistance Test

  • Rise-time control function
  • Fall-time control function
  • Offset cancel function

Vitrek V4 AC/DC Hipot Electrical Safety Analyzer

  • Tests to UL, CSA, IEC, & TUV specifications
  • 4 EST functions in 1 compact, feature-rich instrument
  • Leakage current measurement down to 10µA

Vitrek V51 AC/DC Electrical Safety Tester

  • Fully automated testing at the touch of a button or via PC control
  • AC hipot to 5 kV with 20 mA sourcing
  • DC hipot to 6 kV with 7.5 mA sourcing

Vitrek V53 Electrical Safety Tester

  • Fully automated testing
  • 4 models to choose from
  • Available QuicktestTM test automation software for your PC

Vitrek V60 Programmable AC-DC Hipot / Electrical Safety Tester Series

  • Fully automated testing at the touch of a button or via RS232 & PLC control (GPIB optional)
  • Three models to choose from - select the functions you need to get the job done
  • Available Quicktest™ test automation software for your PC

Vitrek V63 AC/DC/IR Hipot Electrical Safety Analyzer

Vitrek V70 AC Hipot Tester

  • Easy to Use 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface Large High Reliability START and STOP switches Large easy to see PASS/FAIL Indicators
  • 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface
  • Large High Reliability START and STOP switches

Vitrek V71 AC/DC Hipot Tester

  • Easy to Use 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface Large High Reliability START and STOP switches Large easy to see PASS/FAIL Indicators
  • 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface
  • Large High Reliability START and STOP switches

Vitrek V73 AC/DC Hipot, Insulation Resistance Tester

  • Easy to Use 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface  Large High Reliability START and STOP switches Large easy to see PASS/FAIL
  • 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface 
  • Large High Reliability START and STOP switches

Vitrek V74 AC/DC Hipot, IR and Ground Bond Tester

  • Easy to Use 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface Large High Reliability START and STOP switches Large easy to see PASS/FAIL Indicators
  • 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface
  • Large High Reliability START and STOP switches

Vitrek V79 4 Wire 30A Ground Bond Tester

  • Easy to Use 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface Large High Reliability START and STOP switches Large easy to see PASS/FAIL Indicators
  • 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface
  • Large High Reliability START and STOP switches

Vitrek V7X Series Hipot Testers

  • Easy to Use 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface Large High Reliability START and STOP switches Large easy to see PASS/FAIL Indicators
  • 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface
  • Large High Reliability START and STOP switches