Baker Hughes Krautkramer USN 60/60L Portable Ultrasonic Flaw Detector

The Baker Hughes Krautkramer USN 60/60L Portable Ultrasonic Flaw Detector is an ultrasonic inspection tool with a range of 0.040” to 1100” (1 mm to 28 m) at steel velocity (range selectable in fixed steps or continuously variable). Baker Hughes Krautkramer USN 60/60L flaw detectors are optimized for use in direct sunlight and operation at extreme temperatures. These characteristics, in addition to 11 hours of battery, fast rotary knob operation and square wave pulser functionality, make the Krautkramer USN 60/60L ideally suited for outdoor use.

The Baker Hughes Krautkramer USN 60/60L comes with DAC/TCG.

Product Info Available Add-Ons

Range USN 60	0.040” to 1100” (1 mm to 28 m) at steel velocity; range selectable in fixed steps or continuously variable
Material Velocity	Continuously adjustable from 0.0098 to 0.6299 inches/µs (250 to 16,000 m/s); 65 selectable material velocities
Display Delay	-20 to 3498 µs in steel (dependent on range)
Probe Delay/Zero Offset	0 to 999.9 µs
Damping	50, 75, 150, 500 ohms
Gain	0 to 110 dB adjustable in selectable steps 0.1, 0.5, 1.0, 2.0, 6.0, user definable, and locked
Test Modes	Pulse echo, dual, and thru-transmission
Pulser	Square wave excitation pulse
Pulse Voltage (Square wave pulser mode)	50 to 450 V scrollable in 10 V adjustments
Pulse Width (Square wave pulser mode)	Tunable from 50 to 1000 ns in 10 ns adjustments
Pulse Energy (Spike mode)	Low, High
Pulse Repetition Frequency USN 60	Autolow, autohigh, manually adjustable from 15 to 6000 Hz (spike mode) and 15 to 2000 Hz in square wave mode, in 5 Hz increments, external trigger (spike mode only)
Size	11.1” W x 6.75” H x 6.25” D (282 x 171 x 159 mm)
Weight	6.6 lbs. (3.0 kg) Li-Ion battery; 3.5 lbs.(1.6 kg) without battery

Rugged USN durability
11 hours of battery operation
Fast rotary knob operation
Outstanding ultrasonic performance
Extreme temperature use (-20°C to +55°C /-4°F to 130°F)
Hi-resolution color LCD
4 selectable vibrant display color schemes to match lighting conditions
Gates and gate functions color coded for easy identification
Simple operation with fast rotary knob adjustments
Auto CAL makes calibration fast & easy
PRF (pulse repetition frequency) in spike mode: USN 60 = 15 Hz to 6 kHz; USN 60L = 15 Hz to 2 kHz
2 independent gates monitor amplitude and sound path distance for both flaw detection and thickness measurement applications
250 KHz to 25 MHz frequency range
RF display mode enhances signal evaluation and bond inspection of dissimilar materials
4 selectable damping settings (50, 75, 150, 500 ohms) for optimum probe performance
1 mm to 28 m (0.040” to 1100”) range (in steel) covers thin to lengthy acoustically clean materials
dB REF key evaluates subsequent echoes gain value and amplitude against the highest echo in Gate A when activated
VGA Output provides an easy way to connect to a PC monitor or PC projector
IF (Interface) Gate Option for automatic start of the display, Gate A, Gate B, and / or DAC / TCG for immersion testing applications
RF Output Option outputs the raw RF waveform via a standard Lemo connector for further analysis
BEA (Backwall Echo Attenuator) Option allows independent gain control of the region under Gate B for backwall echo monitoring

XDCR-IPS-1X.25MD-NF	Baker Hughes XDCR-IPS-1X.25MD-NF Immersion Probe
XDCR-ISS-5X.5-APHSF	Baker Hughes XDCR-ISS-5X.5-APHSF Immersion UT Flaw Detector Transducer
A542S-SM	Olympus A542S-SM Angle Beam Transducer
OLYM-ABSA-4T-60	Olympus ABSA-4T-60 Screw in Wedge
I-I2-5.0-.50-C-UHF-1.5S	Sensor Networks I-I2-5.0-.50-C-UHF-1.5S

Baker Hughes Krautkramer USN 60/60L Portable Ultrasonic Flaw Detector

Available Add-Ons

Related Products

Olympus Nortec Rotating Bolthole Minimite Scanners

General Electric Mentor EM Eddy Current Flaw Detector

Olympus Nortec 500D Flaw Detector

Olympus NORTEC 600 High-Performance Eddy Current Flaw Detector