AEMC 3945 Three-Phase Power Quality Analyzer PowerPad
- True RMS single-, two- and three-phase measurements at 256 samples/cycle, plus DC
- Real-time color waveforms
- Easy-to-use on-screen setup
AEMC 3945-B Three-phase PowerPad Power Quality Analyzer
- True RMS single, two, and three-phase measurements at 256 samples/cycle, plus DC
- Real-time color waveforms
- Easy-to-use on-screen setup
AEMC 8335
- Measurement of TRMS voltages up to 1000Vrms AC/DC for two, three, four or five-wire systems
- Measurement of TRMS currents up to 6500Arms (sensor dependant)
- Measurement of DC current up to 1400ADC (with MR193 probe)
AEMC 8336 PowerPad III Three-Phase Power Quality Analyzer
- Measurement of TRMS voltages up to 1000Vrms AD/DC for two-, three-, four- or five-wire systems
- Measurement of TRMS currents up to 10kArms (sensor dependent)
- Measures up to 5000ADC with the AC/DC Current Probe Model J93
Amprobe DM-III MultiTest 1000A Power Quality Recorder
- True-rms
- Measures and records broad spectrum of power quality parameters: AC current, AC voltage to 600V including sags and surges, harmonics (THD and individual up to 49th), active, reactive and apparent
- Compatible with wide range of current transducers
AEMC PEL 103
- Simple to use, single-, dual- (split-phase) and three-phase (Y, ∆) power & energy loggers
- Provides all the necessary functions for Power and Energy data logging for 50Hz, 60Hz, 400Hz and DC distribution systems
- Current measurements from 200mA up to 10,000A using flexible current sensors
AEMC PowerPad IV Model 8345 Power Quality Analyzer
- Full compliance with IEC 61000-4-30 ed. 3.0 Class A functions
- Real-time display of color waveforms (5 voltage/4 current) from 1 cycle to 10/12 cycles
- Calculation of unbalance (current and voltage)
AEMC SDL-A303 Sentinel Current Data Logger
Fluke RPM 1650 Power Recorder
- The sampling system processes every cycle on all channels, recording min/max/avg values and looking for sags, swells, or transients.
- The system can store 6000 events (up to 96,000 withMultisession Option). You can see everything from sub-cycle events to long-term outages with clear detail.
- Records power parameters, RMS voltage, RMS current, harmonics, flicker and monitors for power quality events on all channels simultaneously without havingto reconfigure.
Fluke 1664 FC Installation Multifunction Tester
- Multifunction tester that tests to all local regulations
- Includes "Insulation Pre-test" that detects when appliances are connected to the system and stops the test
- Runs seven installation tests automatically in one sequence with a single connection through Auto Test
Fluke 1730
- Key measurements: Voltage, current, power, power factor and associated values enable you to optimize and implement your energy saving strategies.
- Bright, color touch screen: Perform convenient in-the-field analysis and data checks with full graphical display.
- Comprehensive logging: More than 20 separate logging sessions can be stored on the instrument. In fact, all measured values are automatically logged and can be reviewed during logging and before
Fluke 1735
- Record power and associated parameters for up to 45 days
- Monitor maximum power demand over user-defined averaging periods
- Efficiency improvements with energy consumption tests
Fluke 1736
- Ability to automatically log voltage and current
- Ability to find harmonics and power quality values
- Event waveform snapshots
Fluke 1738 Advanced Power Logger
- Automatically capture and log voltage, current, power, harmonics and associated power quality values
- Fluke Connect® compatible: view data locally on the instrument or via Fluke Connect mobile app and desktop software
- Convenient instrument powering
Fluke 1743 Water-Proof Power Quality Logger
- Measurement of common power parameters: V, A, W, VA, VAR, PF, energy, flicker, voltage events, and THD
- IP65 waterproof
Fluke 1745 Three-Phase Power Quality Logger
- Measurement of common power parameters: V, A, W, VA, VAR, PF, energy, flicker, voltage events, and THD
- Measurement of voltage and current harmonics to the 50th, unbalance, and mains signaling
- IP50 resistance
Fluke 1750
- Power quality that meets the standard: all measurements comply with IEC61000-4-30 standards for correct evaluation
- Threshold-free setup: apply thresholds after data is collected with Fluke Power Analyze Software
- Captures everything through cross-channel and current triggering
Fluke 1760 Three-Phase Power Quality Recorder Topas
- Fully Class-A compliant
- GPS time synchronization
- Flexible and fully configurable thresholds and scale factors
Fluke 1773 Three-Phase Power Quality Analyzer
- Automatically measure power and power quality parameters
- At-a-glance power quality health for faster troubleshooting
- Easily view V/A/Hz, power, dips, swells, and harmonics data
Fluke 1775
- Automatically measure power and power quality parameters
- At-a-glance power quality health for faster troubleshooting
- Easily view V/A/Hz, power, dips, swells, and harmonics data
Fluke 1777
- Automatically measure power and power quality parameters
- At-a-glance power quality health for faster troubleshooting
- Easily view V/A/Hz, power, dips, swells, and harmonics data
Dranetz 3030A Powerprofiler Basic Measuring Instrument
Hioki 3169-20 Clamp-On Power HiTester
- Measure up to 3-phase, 3-wire system (displays voltage and current for three lines)
- Measure up to four single-phase, 2-wire systems
- 5A to 5000A range
Fluke 345 Power Quality Clamp Meter
- AC/DC current: Clamp-on measurement of ac current up to 1400 A rms and dc current up to 2000 A without breaking the circuit
- Highest safety rating: 600 V CAT IV power analyzer is rated for use at the service entrance
- Accurate in noisy environments: Clamp meter performs even with distorted waveforms present on electronic loads with low-pass filter
Fluke 3540 FC Three-Phase Power Monitor & Condition Monitoring Kit
- Measures: Single, split, or three phase loads Voltage, current, and frequency Active power, non-active power, and power factor Total harmonic distortion
- Single, split, or three phase loads
- Voltage, current, and frequency
Fluke 375 True-RMS AC-DC Clamp Meter
- iFlex flexible current probe expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.
- CAT IV 600 V, CAT III 1000 V
- True-rms ac voltage and current for accurate measurements on non-linear signals
Fluke 39 Power Meter Harmonics Analyzer 1 Ch, 2.1 kHz
Fluke 41B Power Harmonics Analyzer
- Displays voltage, current and power waveforms
- Measures RMS, Peak and Total Harmonic Distortion of voltage and current
- Displays harmonic detail in bar graph format
Fluke 43 Power Quality Analyzer
- Combines the most useful capabilities of a power quality analyzer multimeter and scope
- Measure power harmonics. and catch intermittents
- monitoring functions help track intermittent problems and power systems performance
Fluke 430 Series Three-Phase Power Quality Analyzers
Fluke 433 Three-Phase Power/Electrical Meter
- Records all your necessary values in a three phase system.
- Minimal setup required with intuitive menus.
- Highest safety rating in the industry.
Fluke 434, 3-Phase Power/Electrical Meter
- Records all your necessary values in a three phase system
- Minimal setup required with intuitive menus
- Highest safety rating in the industry
Fluke 435 Three Phase Energy & Power Quality Analyzer
- Troubleshoot real-time: Analyze the trends using the cursors and zoom tools-even while background recording continues.
- Automatic Transient Mode: Capture 200 kHz waveform data on all phases simultaneously up to 6 kV
- Measure all three phases and neutral: With included four current probes
Fluke 435-II Power Quality & Energy Analyzer
- Quickly see how much money losing due to energy waste in terms of real dollars
- Easily see how motor startups are affecting motor drive performance
- Get at-a-glance power quality health data in real-time so you can make better maintenance decisions
Fluke 437 Three Phase Energy & Power Quality Analyzer
- Power inverter efficiency: Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp.
- PowerWave data capture: Capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.).
- Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint the fiscal costs of energy losses
Fluke 437-II Three-Phase Power Quality Analyzer
- Energy loss calculator: quantified to pinpoint true system energy losses in dollars
- Power inverter efficiency: simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp
- Capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics
Fluke 438-II Power Quality Analyzer & Motor Analyzer
- Measure key parameters on direct-on-line motors and motors driven by specific variable frequency drive systems including torque, RPM, mechanical power and motor efficiency
- Perform dynamic motor analysis by plotting of motor de-rating factor against load according to NEMA guidelines
- Calculate mechanical power and efficiency without the need of mechanical sensors, just connect to the input conductors and you’re ready to go
Fluke 43B 1-Phase Power Quality Analyzer | 600V/500A
- Displays voltage, current, and power waveforms
- Measures RMS, Peak, and Total Harmonic Distortion of voltage and current
- Displays harmonic detail in bar graph format
Dranetz 8000-2 Energy Analyzer
- Motor Inrush Analysis
- Harmonic Analysis
- Removable Memory Cards
Dranetz Analyst 3Q Power Quality Analyzer
- Available as single-phase or three-phase instrument
- 3 voltage and 4 current channels
- Ergonomic, optimized user interface
Yokogawa Clamp-on Power Meter CW240 Power Supply Quality
- Electric power analysis and power supply quality control in a single unit
- Simultaneous measurement of loads in four systems(common to voltage)
- Wide measurement range
Dranetz DranXperT
- DranXperT Power Logger with 4 Flex Current Probes 16-inch, 1500 A
- PQ disturbance/event detector, power/energy logger, and sensor logger
- 3 voltage channels – direct measurements up to 600 Vrms, CAT III
Dranetz Dran-View 6 Software
- Presentation of up to 16 simultaneous data sets emanating from different instrument models. This allows comparison of data from different sources in the same chart. Performs mathematical calculations
- Supports an unlimited number of presentation aides such as charts, statistical tables, and phasors in each window.
- Uses simple, intuitive drag-and-drop function to manipulate screen items.
Dranetz EP1 Energy Platform 600 V, 45 Hz - 65 Hz
- Advanced Demand, Energy, Harmonics and Power Analysis - Perfect for energy reduction/savings and alternative energy applications
- High accuracy & High resolution — 0.1% V&I, 256 samples/cycles - continuous monitoring
- Automatic setup — No learning curve!
Elspec BlackBox G4500 Power Quality Analyzer
- Battery life of up to 2 hours allowing continuous measurement and recording
- No need for cables
- Easy to use everywhere
Dranetz HDPQ Guide Power Quality Analyzer
- High definition PQ & energy monitoring: 1000 Vrms, AC/DC, 512 samples/cycle
- Eight channels, 4 voltage & 4 current
- AnswerModules: sag directivity, PF capacitor identification, motor: automatic event categorization
Dranetz HDPQ Guide SP Power Quality Analyzer
- IP65 enclosure
- GPS
- High Definition PQ & Energy Monitoring – 1000Vrms, AC/DC, 512 samples/cycle
Dranetz HDPQ Visa Power Quality & Energy Monitoring Analyzer
- High Definition PQ & Energy Monitoring – 1000Vrms, AC/DC, 512 samples/cycle
- Eight channels, 4 voltage & 4 current
- Advanced PQ – IEC 61000-4-30 Class A & IEEE 1159 compliant
Dranetz HDPQ Xplorer Power Quality Analyzer
- High definition PQ & energy monitoring: 1000 Vrms, AC / DC, 512 samples/cycle
- High speed digitized transients to 1us – to 2000Vpk
- Eight channels, 4 voltage & 4 current
Dranetz HDPQ Xplorer 400 Power Quality Analyzer
- 50/60Hz and 400Hz operating modes
- 1000Vrms, AC/DC, 512 samples/cycle
- 10 to 2000Vpk
Dranetz HDPQ Xplorer Plus Power Quality Analyzer
- High Definition PQ & Energy Monitoring – 1000Vrms, AC/DC, 512 samples/cycle
- High Speed Digitized Transients – 1us, 10 to 2000Vpk
- Transient triggers – V & I – waveshape triggers, high speed. Well beyond PQ standards requirements
Megger MPQ2000 Portable Power Quality Analyzer
- Power off Phase A or auxiliary, allowing it to be used anywhere without an AC outlet
- Weather proof to NEMA 4 standard for use in any environment
- Auto CT identifies the current that the instrument is connected to and the range that it is in
Keysight N1911A P-Series Single Channel Power Meter
- 30 MHz video bandwidth
- Single shot real time capture at 100 Msample/s per second
- Key Measurements: - peak, average, peak-to-average ratio, rise time, fall time and pulse width
CHK Power Quality MIRO PQ45 Power Quality Logger & Analyzer
- Certified to IEC61000-4-30, Class A
- Rugged, shock resistant, portable, and weatherproof – NEMA 4X (IP66 rated)
- WIFI or 3G/4G remote communications
Elspec Pure BlackBox Handheld Power Quality Analyzer
- Continuous waveform recording at 256 sample/cycle
- Class A devices IEC30-4-61000
- Conguration FREE Device
Hioki PW3198 Power Quality Analyzer
- Transient overvoltage : 2MHz sampling.
- Frequency cycle : Calculated as one cycle, 40 to 70Hz
- RMS voltage/ RMS current refreshed each half-cycle
Hioki PW3360 Clamp On Power Logger
- Supports single to three-phase, 4-wire circuits
- Measure between 90V to 780V
- Simultaneously measure up to three single-phase, 2-wire circuits (in the same power system)
Hioki PW3365 Clamp On Power Logger
- Voltage measurement from the top of the cable, zero risk of short circuit
- Supports single to three-phase, 4-wire circuits
- Measure between 90V to 520V
Dranetz PX5-400 Power Analyzer
- Tests at 50/60 and 400Hz
- Meets MIL Standard 1399 testing
- Eight channels, 4 voltage & 4 current
Dranetz PX5-X-Fast PowerXplorer Power Quality Meter
- Eight channels: 4 voltage & 4 current
- Intuitive color touch screen
- Light weight – About 4 pounds, 2 kg – with rugged rubber boot
Dranetz MP MeasuringPAD 16 Channel Power Recorder
- 16 differential channels: 16 analog, 8 digital
- High speed sampling: 10 kHz per analog input, 40 kHz per digital input
- Intuitive color touch screen