OMICRON TESTRANO 600 Three-phase Power Transformer Test System

The OMICRON TESTRANO 600 is a three-phase power transformer test system designed for both routine and diagnostic testing of power transformers on-site or during factory acceptance tests. It enables multiple transformer tests without the need for reconnection, enhancing efficiency. Featuring an active discharge system, it quickly discharges windings after testing, ensuring technician safety. The system is operable through an integrated 10.6-inch multi-touch display with TESTRANO TouchControl or remotely via laptop using the Primary Test Manager software, which guides users step-by-step. It can energize all three phases simultaneously, reducing rewiring and shortening test times. Additionally, paired with the CP TD1, the TESTRANO 600 extends its testing capabilities across a frequency range of 15 Hz to 400 Hz, increasing sensitivity and enabling earlier detection of issues.

Product Info

Voltage	Nominal: 100 V - 240 V AC Permitted: 85 V - 264 V AC
Frequency	Nominal: 50 Hz - 60 Hz Permitted: 45 Hz - 65 Hz
Power fuse	magnetic overcurrent tripping at I > 16 A
Temperature	Operating: -10 °C - +55 °C / +14 °F - +131 °F Storage: -30 °C - +70 °C / -22 °F - +158 °F
Relative humidity	5 % - 95 %, non-condensing
Maximum altitude	Operating: 2000 m / 6550 ft
Dimensions	580 × 386 × 229 mm / 22.9 × 15.2 × 9.0 inch
Weight	20.6 kg (45.5 lb.)

Powerful device (3x 33 A DC and 400 V AC)
One setup for multiple tests, less reconnecting
Three times faster testing
Active discharge function for increased efficiency and safety during testing
Fast and reliable demagnetization
Portable and compact one-box solution 20 kg (44 lbs)

Transformer turns ratio
Exciting current
DC winding resistance
Dynamic resistance (DRM)
Short-circuit impedance / leakage reactance
Frequency response of stray losses (FRSL)
Power/dissipation factor and capacitance (with CP TD1 accessory)
Demagnetization

Shock	IEC / EN 60068-2-27, 15 g / 11 ms,
Vibration	IEC / EN 60068-2-6, frequency range from 10 Hz to 150 Hz, continuous acceleration 2 g (20m⁄s2 / 65ft⁄s2), 10 cycles per axis