Keysight N5230C PNA-L Microwave Network Analyzer
- 300 kHz to 20 GHz
- 2- or 4- ports with a built-in sources
- 110 dB system and 122 dB receiver dynamic range
Rohde & Schwarz ZNB8 Vector Network Analyzer
- Wide dynamic range of up to 140 dB
- Short sweep times of 4 ms for 401 points
- High temperature stability of typ. 0.01 dB/°C
Keysight 4294A Precision Impedance Analyzer
- Accurate measurement over wide impedance range and wide frequency range
- Basic impedance accuracy: +/- 0.08 %
- 40 Hz to 110 MHz, 3 m ohms 500M ohms
Keysight 4396B RF Network/Spectrum/Impedance Analyzer
- Full-vector network and spectrum measurement and analysis
- Wide dynamic range network measurement with fast sweep speeds
- +/-0.05 dB/ +/-0.3deg C dynamic magnitude/phase accuracy
Keysight N5225B PNA Microwave Network Analyzer
- Frequency Range | 900 Hz-50 GHz
- Dynamic Range | 127 dB
- Harmonics | -60 dBc
Keysight E5071C ENA Vector Network Analyzer, 9 kHz - 20 GHz
- Wide frequency coverage: 9 kHz to 20 GHz
- Low trace noise: <0.004 dB rms at 70 kHz IFBW
- Wide dynamic range: >123 dB
Keysight 8722ES Vector Network Analyzer, 50 MHz - 40 GHz
- 50 MHz to 40 GHz
- Up to 110 dB of dynamic range
- Excellent measurement accuracy
Tektronix TTR500 Series Vector Network Analyzer (VNA)
- Full 2-port 2-path S-parameter measurement (S11, S21, S12, S22) in a variety of formats.
- Complete vector network analysis capability with Tektronix VectorVu-PC™ software.
- Built-in bias tee accessible on both ports to bias active devices.
Doble M5500 Sweep Frequency Response Analyzer
- 1045 points (Default)
- Up to 5000 points (Extended Range)
- Lightweight and rugged portable test instrument
Keysight N9951A FieldFox Handheld Microwave Analyzer
- Standard model includes cable and antenna analyzer.
- Save time by measuring DTF and TDR in the same sweep.
- Measure all four S-parameters simultaneously.
Keysight 4191A RF Impedance Analyzer
- 1 - 1000 MHz variable test frequency with sweep capability
- Direct reading of |Z| - Θ, |Y| - Θ, |F| - Θ; L, C-R, G, D, Q, R-X, G-B, Px-Py
- High resolution - 4½ digit max
Anritsu MS2026A Vector Network Analyzer
- Frequency Range: 2 to 6000 MHz
- Frequency Accuracy: 25 ppm
- Frequency Resolution: 10 kHz
Keysight FieldFox N9923A Network Analyzer (Agilent N9923A)
- Built-in QuickCal technology enables calibration without a cal kit
- Best measurement stability over time and temperature
- Industry´s only handheld network analyzer with MIL PRF 28800F Class 2 compliance with no exceptions
Megger FRAX 101 Sweep Frequency Response Analyzer
- Smallest and most rugged FRA instrument in the industry
- Highest possible repeatability by using reliable cable practice and high-performance instrumentation
- Fulfills all international standards for SFRA measurements
Keysight 4193A Vector Impedance Meter, 400 kHz - 110 MHz
- Test components in-circuit and out-of-circuit
- Measure impedance magnitude (10 mΩ to 120 kΩ) and phase (-180.0 to +180.0)
- Fixtures include low-grounded probe, spring clip fixture, and binding post fixture
Keysight 85093C RF Electronic Calibration (ECal) Module | 3.5mm
- 300 kHz to 9 GHz frequency range
- Fast full two-port calibration with a single connection
- Simple non-insertable device calibration
Keysight Streamline Series USB Vector Network Analyzers
- Get consistent technology, user interface, and automated code capabilities across bench, modular, and USB platforms
- Most compact VNA for easy sharing between test locations
- Wide choice of frequency ranges from 300 kHz up to 26.5 GHz
OMICRON FRANEO 800 Sweep Frequency Response Analyzer
- Extremely small and compact device
- Innovative connection technique
- Short measurement times
Keysight N5221B PNA Microwave Network Analyzer 10 MHz to 13.5 GHz
- PNA Network analyzer software tools for investigating, characterizing & troubleshooting designs
- Advanced Design System (ADS): complete, integrated set of fast and accurate circuit & system simulators
- Configurable test set
Anritsu ShockLine MS46131A | 1 MHz – 43.5 GHz
- 1-port VNA with frequency options from 1 MHz to 8 GHz / 20 GHz / 43.5 GHz
- Guaranteed performance to 43.5 GHz with Extended-KTM ports
- PC control takes advantage of external computer processing power and functionality
Keysight 8753E RF Network Analyzer, 30 kHz - 3/6 GHz
- 30 kHz to 3 or 6 GHz frequency range
- Integrated S-parameter test set with solid-state switching
- Up to 110 dB dynamic range
Keysight E4990A Impedance Analyzer | 20 Hz to 10/20/30/50/120 MHz
- Five frequency options: 20 Hz to 10/20/30/50/120 MHz
- ±0.08% (typical ±0.045%) basic impedance measurement accuracy
- 25 mΩ to 40 MΩ wide impedance measurement range (10% measurement accuracy range)
Anritsu MS2038C VNA Master & Spectrum Analyzer | 5 kHz to 20 GHz
- 2-port, 2-path, fully-reversing VNA
- S-parameters measured with a single connection
- 350 μsec per data point
Keysight 4291A RF Impedance Material Analyzer
- Basic accuracy +/- .08%
- Advanced calibration and error compensation
- Four component test fixtures (DUT size: 0.5mm to 20 mm)
Wayne Kerr 6500B Series Impedance Analyzers
- Precise high frequency impedance measurements
- Characterize components from 20 to 120 MHz
- Wide range of models with maximum frequencies from 5MHz (6505B) to 120MHz (65120B)
