Megger EVCC300 Battery Charger Tester

The Megger EVCC300 Battery Charger Tester introduces an innovative method of testing electric vehicle charge points. The device features a voltage range of 5 V to 300 V and a frequency range of 45 Hz to 65 Hz. The Megger EVCC300 offers an all-in-one design, providing a simple solution to check the safety and operation of mode 2 and single phase mode 3 EV chargers (level 1 and two phase level 2). The EVCC300 tester is ideal for checking EV charge points as part of an inspection or maintenance procedure.

Product Info

IP rating	IP40
Weight	583 g (1.29 lb.)
Dimensions (H x L x W)	24 x 18 x 8.6 cm (9.45 x 7.9 x 3.39 in)
Battery Type	AA
Voltage Range	5 V – 300 V
Voltage Resolution	1 V
Voltage Accuracy	±5% ±2 digits
Frequency Range	45 Hz – 65 Hz
Frequency Resolution	1 Hz
Frequency Accuracy	±1 digit
Operational Temperature	0ºC – 40ºC

Checks mode 2 and single phase mode 3 (level 1 and two phase level 2) chargers
Checks chargers with SAE J1772 Type 1 and Type 2 connectors
Performs four EV charger safety checks
Performs four EV charger operation checks
Checks to see if nuisance tripping or RCD/GFCI is likely to occur
Reads control pilot state response from EV Charger to IEC61852-1
PE touch pad to check ground connection and hazardous voltages

Safety and operation checks on mode 2 and single phase mode 3 charge points (level 1 and two phase level 2 in the USA)
Connects to SAE J1772 Type 1 and Type 2 charger connectors only
Checking charger following installation before hand over to customer
Checking charger as part of a regular maintenance schedule
Checking charger following repair before hand over to customer
Checking chargers following manufacturing as part of a QA inspection
Fault checking when customer reports charger issues to car dealership/service center