Y.I.C. Technologies EMProbe
- Frequency: Up to 13 GHz with the supplied Y.I.C. Technologies probes
- For component side of the PCB along with the EMscanner
- Capability: spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, and report generation
Electro-Metrics EM-6992 Near Field Probe Set
- Gain: 25 dB, typical
- Bandwidth (@ -3 dB): 1199.995 MHz
- Frequency Range: 5 kHz-1200 MHz
Noiseken FVC-777 EMI Noise Sensor, 30 MHz - 1 GHz
- Electric Field 100 KHz - 1000 MHz (F10006 Probe) 5.6-560mV
- Magnetic Field:100 KHz - 30 MHz (F100007 Probe) 0.01-1.0mA
- Magnetic Field: 30 MHz - 1000 MHz (F10008 Probe) 0.63-6.3mA
Y.I.C. Technologies NFPKit
- 10MHz - 13GHz
- Handheld EMI probe
- Live real-time probe position tracking to identify location of EMI
Y.I.C. Technologies EMScannerR
- Frequency: 150 kHz – 8 GHz
- EMC analyzer for EMI emissions or PCB
- Capability: Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, report generation and notes
PMM SHC-1/1000 CISPR Passive Probes
- 9 kHz to 30 MHz frequency range
- CISPR 16-1-2 compliant
- Suitable for lines up to 1000 Vac - 1500 Vdc
ETS Lindgren Holaday's HI-1801 Survey Meter
EMSCAN ERX EMC Scanner
- 150 kHz - 8 GHz frequency range
- 1,218 H-field probes built in
- Customizable spatial resolution of 0.06 mm - 7.5 mm
Com-Power PS-500 Near Field Probe Set for EMI/EMC Testing
- Complete Solution - Includes E and H fi eld probes
- Contact tip probe - Make contact with the circuit
- Locate Noise Source - Down to a pin with the fi ne tip
Keysight 11940A Close Field Probe | 30 MHz - 1 GHz
- Designed to measure magnetic-field radiation from surface currents, slots, cables, and ICs for EMC diagnostic and troubleshooting measurements.
- Operates from 30 MHz to 1 GHz
- Five antenna factors for calculating absolute magnetic-field strength (dBµA/m) from dBµV reading of a spectrum analyzer.
AH Systems AK-18G EMC Antenna & Probe Kit | 20 Hz - 18 GHz
Noiseken FVC-1000 EMI Noise Sensor, 30-1000 MHz
Keysight 11945A-E51 Closed Field Probe Set
- Designed to measure magnetic-field radiation from surface currents, slots, cables, and ICs for EMC diagnostic and troubleshooting measurements.
- Operates from 9 kHz to 1 GHz
- Five antenna factors with each probe for calculating absolute magnetic-field strength (dBµA/m) from dBµV reading of a spectrum analyzer.
Com-Power PS-400 Near Field Probe Set
Y.I.C. Technologies EMScanner
- Frequency: 150 kHz to 8 GHz
- EMC analyzer for EMI emissions or PCB
- Capability: Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, and report generation.
PMM SHC-2/1000 CISPR Passive Probes
- 9 kHz to 30 MHz frequency range
- CISPR 16-1-2 compliant
- Suitable for lines up to 1000 VAC – 1500 VDC
Keysight N9311X-100 Close Field Probe Set | 30 MHz - 3 GHz
- Frequency range: 30 MHz to 3 GHz
- Measurement tool for EMI precompliance test, troubleshooting and design verification
- Searches for sources of interference early in the design process
EMCO/ETS-Lindgren 7405 E/H Near Field Probes
- Broadband Frequency Range
- Linear Response
- Locates both E and H Field
EMSCAN ERX+ EMC Scanner
- 150 kHz - 8 GHz
- 1,218 H-field probes
- User-selected spatial resolution: 0.06 mm - 7.5 mm