IFI GT251-500A CW/Pulse TWT Amplifier 1 GHz - 2.5 GHz, 500 Watts

CW/Pulse TWT Amplifier 1 GHz - 2.5 GHz, 500 Watts

Product Info Related Products

Frequency Range	1-2.5 GHz
Min Pwr Out	500 Watts
Min Sat Gain	57 dB
Max NF	35 dB
Spurious Outputs	-40 dBc, maximum
Spurious Outputs	-50 dBc, available
Input Impedance	50 ohms, VSWR 2.0:1
Output Impedance	50 ohms, VSWR 2.0:1
Output Impedance	2.5:1 maximum
Input Connector	Type N (Female)
Output Connector	1.0 to 8.0 GHz, Type N or SC (Female), 8.0 to 12.0 GHz, WR90 12.0 to 18.0 GHz,WR62 7.5 to 18.0 GHz, WRD750 6.0 to 18.0 GHz, WRD650 (Other waveguides available Option 117)

Digital Display Monitors: Collector Current, Collector Voltage, Helix Current, Helix Voltage, Forward RF Power, Reflected RF Power, Filament Hours, Beam Hours
Status Indicators: Power On, Standby, RF On/Operate
Faults: Helix Overcurrent, VSWR Overload, Thermal Overloads, Air Flow, Collector Overcurrent
Controls: Power On/Off, Standby, RF On/Operate, Fault Reset, Local/Remote
Ease of Maintenance
Designed to meet the safety requirements of the IEC-348 and Underwriters Laboratory of American Standards
Broadband Coverage

MIL-STD-461/462
RTCA/D0-160
SAE Specifications
Radiated Susceptibility
Bellcore testing
Broadband Communications
Ruggedized Versions are available for Shipboard and Airborne applications

SKU: IFI-GT251-500A

Milmega AS0822-100 Broadband Amplifier, 800MHz - 2.2GHz, 100 Watts

Gain variation with temperature <0.06 dB/OC
IP3 typically 10 dB> P1 dB
Harmonics –20 dBc max

Advanced Amplifiers AA-500M6G-150 Solid-State RF Amplifier | 500 MHz - 6 GHz, 150 W

0.5 - 6 GHz
150 W
53 dB min

Advanced Amplifiers AA-12G-1000 Solid State Amplifier | 1.0 - 2.5 GHz, 1000 W

1.0 - 2.5 GHz
1000 W
60 dB min

Comtech PST AR178238-30 Solid State Amplifier 1.7 GHz - 2.3 GHz, 30 W

1.7 - 3.0 GHz
30 W
CW Amplifier

IFI T2618-10 TWT Amplifier 18 GHz - 26.5 GHz, 10 Watt

Digital Display Monitors: Collector Current, Collector Voltage, Helix Current, Helix Voltage, Forward RF Power, Reflected RF Power, Filament Hours, Beam Hours
Status Indicators: Power On, Standby, RF On/Operate
Faults: Helix Overcurrent, VSWR Overload, Thermal Overloads, Air Flow, Collector Overcurrent

Advanced Amplifiers AA-618G-300-T TWT Pulse Amplifier | 6.0 - 18.0 GHz, 300W

6.0 - 18.0 GHz
300 W
54 dB min

Amplifier Research 250S1G6

700 MHz- 6 GHz
250 W
54 dB

Comtech PST AR1929-50 Linear Amplifier, 1GHz - 2GHz, 50 Watts

Frequency Range: 1 GHz to 2 GHz; bandwidths to multi-octave
Power Output: 50 watts
CE Compliant

Comtech ARD88258-50 RF Power Amplifier, 800MHz - 2.5GHz, 50 Watts

Continuous 800 to 2,500 MHz Range
IEEE-488 Remote Interface Bus
CE Compliant Device

IFI T82-500 TWT Amplifier, 2 - 8GHz, 500W

Solid state power supply
Instantaneous broadband frequency range
Modular design, rugged construction, force air cooling

Empower 2198 Solid State Amplifier 20 MHz - 6 GHz, 100 W

Empower RF’s ISO9001 Quality Assurance Program assures consistent performance highest reliability
Solid-state Class AB design
Suitable for CW, AM, FM and pulse (Consult factory for other modulation types)

Amplifier Research 60S1G6 Microwave Solid State Amplifier 0.7 - 6.0 GHz, 60W

700 MHz - 6 GHz
60 W
CW Amplifier

CPI PTC6358 Pulse TWT Amplifier

EMC HIRF testing – meeting the most demanding RTCA/DO-160 requirements
Military testing for MIL Std 461 200 V/m
Scientific research

IFI T186-60 TWT Amplifier 6 GHz - 18 GHz, 60W

Digital Display Monitors: Collector Current, Collector Voltage, Helix Current, Helix Voltage, Forward RF Power, Reflected RF Power, Filament Hours, Beam Hours
Status Indicators: Power On, Standby, RF On/Operate
Faults: Helix Overcurrent, VSWR Overload, Thermal Overloads, Air Flow, Collector Overcurrent

Exodus AMP2065B Solid State RF Amplifier | 6 GHz - 18 GHz, 300 W

Class AB linear GaN hybrid design
Instantaneous ultra-wide bandwidth
Solid-state TWT replacement

Advanced Amplifiers AA-700M6G-150 Solid State High Power Amplifier

1.0 - 6.0 GHz
150 W
52 dB min

IFI S31-500 Solid State RF Power Amplifier 800 MHz - 3 GHz, 500 Watts

VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
Alternate Prime Power (specify at time of order)
GPIB IEEE 488 and RS232 Remote Control

Advanced Amplifiers AA-118G-20 Solid State Amplifier | 1.0 - 18.0 GHz, 20 W

1.0 - 18.0 GHz
20 W
43 dB min

Advanced Amplifiers AA-1M6G-30 Solid State RF Amplifier

1.0 MHz - 6.0 GHz
30 W
45 dB min

IFI T42-200 TWT Amplifier 2 GHz - 4 GHz, 200 Watt

Digital Display Monitors: Collector Current, Collector Voltage, Helix Current, Helix Voltage, Forward RF Power, Reflected RF Power, Filament Hours, Beam Hours
Status Indicators: Power On, Standby, RF On/Operate
Faults: Helix Overcurrent, VSWR Overload, Thermal Overloads, Air Flow, Collector Overcurrent

IFI T-1000 Series High Power, RF Microwave, TWT Amplifiers

Input/output Impedance: 50 ohms
RF Input/ Sample Connectors: Type N Female, unless specified otherwise
RF Output Connector: Type 716 Female up to 7.5 GHz, 4 – 8 GHz is WRD350 8 – 12 GHz is WR90, 12 – 18 GHz is WR62, 7.5 – 18 GHz is WRD750, 6.5 – 18 GHz is WRD650 Other

IFI T82-250 TWT Amplifier 2 GHz - 8 GHz, 250 Watt

Digital Display Monitors: Collector Current, Collector Voltage, Helix Current, Helix Voltage, Forward RF Power, Reflected RF Power, Filament Hours, Beam Hours
Status Indicators: Power On, Standby, RF On/Operate
Faults: Helix Overcurrent, VSWR Overload, Thermal Overloads, Air Flow, Collector Overcurrent

Logimetrics A330/C TWT Amplifier, 4 GHz - 8 GHz, 20 Watts

4 GHz - 8 GHz
20 W
CW Amplifier

IFI T188-500 High Power Amplifier | 7.5 – 18 GHz, 500 W

Digital Display Monitors: Collector Current, Collector Voltage, Helix Current, Helix Voltage, Forward RF Power, Reflected RF Power, Filament Hours, Beam Hours
Status Indicators: Power On, Standby, RF On/Operate
Faults: Helix Overcurrent, VSWR Overload, Thermal Overloads, Air Flow, Collector Overcurrent

Milmega AS0825-125 Broadband Amplifier 0.8 GHz - 2.5 GHz, 125 Watts

15 way rear mounted D-type allowing remote operation via TTL commands whilst providing access to an output signal sample
All data is measured at 25 OC driven from a 50 W source and driving into a 50 W load
Input power (for rated output) 5 dBm