Haefely PSURGE 30.2 Surge Test System | 30 kV / 30 kA
- Up to 30 kV impulse voltage
- Up to 30 kA impulse current
- automatic polarity switching
Haefely AXOS8 Compact Conducted Immunity Test System
- 0.2 – 5.0 kV ±10% at coaxial output
- 50 Ohms
- 5 ns ±30%
Haefely AXOS5 Compact Immunity Test System
- Easy to operate with manual and automated test modes, software assisted test preparation
- Pre-defined test routines and visual aided test setups
- Economic & efficient touch screen guarantees reduction of time and effort
EMC Partner IMU-MGE Conducted Immunity Test System
- Surge / CWG 4kV / 5 kV / 6kV / 8kV
- Ring Wave 6kV / 8kV
- EFT 4kV / 5kV / 6kV / 7kV
Thermo Keytek ECAT E521
- AC CDN for single-phase lines to 480V, 32A
- Surge Repetition Rate 1 shot/30 seconds @ <=10kV 1 shot/minute @ >10kV
- Open-Circuit Voltage: 1.2/50µs, 200V to 20.2kV ±10%
EMC Partner DOW3000 Oscillatory Wave Generator
- Slow wave, fast wave or impulse voltage testing or any combination
- Integrated 32 A three-phase coupler
- Oscillatory wave of 100 kHz to 30 MHz
EMC Partner IMU3000 Immunity Tester
- 7” Colour touch panel
- Rotary knob for navigation and data entry
- EPOS (EMC PARTNER Operating System) a new concept in graphical user interface
Teseq CDN 3063-S100 3-Phase Coupling/Decoupling Network
- Three phase models with broad current range up to 100 A
- Fully automated surge and/or burst coupling
- IEC and ANSI coupling methods
M Precision Laboratories EMCPro PLUS EMC Test System
- Portable, mid-range EMC test system
- Resident capabilities for compliance testing to 6 IEC/EN standards
- Addresses ANSI/IEEE C62.41, ITU, ETSI, & UL 864 standards
Thermo Keytek ECAT E103 Control Center
- Virtual Front Panel™ retains key operating parameters during set up & testing
- Multi-level system interlock architecture provides maximum safety
- Single output port/instant mode switching
Haefely PIM 155 Oscillating Magnetic Field Module | 100 kHz & 1 MHz for IEC 61000-4-10
- 100 kHz & 1 MHz frequencies
- Up to 100 A/m magnetic field strength
- Variable burst duration
EM Test OCS 500N6F | 3 MHz / 10 MHz / 30 MHz
- Fully automated single box test system
- Single DUT port
- Fast Damped Oscillatory Waves up to 4.4kV
Haefely MAG 1000 Magnetic Field Generator | 50/60 Hz, 1100 A/m
- Continuous and short duration testing exactly as it specifies in IEC 61000-4-8
- No external power supplies needed
- Up to 1100A/m field strength
EMC Partner IMU-MGS Conducted Immunity Generator
- One touch parameter editing in run state
- Impulse stability over long periods
- Intuitive multi touch graphical interface
Teseq NSG 3060 Transient Generator
- Modular, expandable system
- Surge voltage to 6.6 kV for overtesting
- Easy to use 7" color touch screen
Haefely PIM 150 Oscillating Wave Module for IEC 61000-4-12 & ANSI C37.90.1
- 100 kHz & 1 MHz frequencies
- 75 ns rise-time
- 3.3 kV impulse voltage
EM Test NX5 Multifunctional Test Generator
- Small transient generator with 7" color touch screen
- IEC 61000-4-4 | Burst testing, 5.5kV
- IEC 61000-4-5 | Surge testing, 5.0kV
EMC Partner IMU4000 Immunity Tester 4kV
EMC Partner DOW-CG1-S-F-I Slow/Fast Damped Oscillatory Wave Generator
- 7” color touchscreen
- High performance built-in CDN
- EUT overcurrent protection
Teseq NSG 3150 Combination Wave Surge Generator | 15 kV
- Surge voltage up to 15 kV
- CDN range: Single & Three Phase, up to 63 A, 690 VAC, 1000 VDC
- Safest 15 kV connector type on the market
Teseq INA 702 Magnetic Field Coil | 1200 A/m Pulsed
- 11 turns with tap off at turn 1,5,11
- Includes stand with socket, rotation mechanism with brake, vertical positioning mechanism, traceable calibration certificate, 2 termination plugs (Pulse and power), cable for connecting to MFO 6501
- Can be used with NSG 1007 sources and INA 2141 (impedance box for Magnetic Field tests) by use of optional adapter cable.
Teseq MFO 6502 Automatic Power Line Frequency Magnetic Field Generator | 50/60 Hz, 40 A/m
- Integrated function unit to NSG 3040
- Magnetic field test with 50 or 60 Hz up to 40 A/m
EMC Partner MF1000-1 Inductive Coil | 50/60 Hz, 1855 A/m Pulsed
Haefely / Bellcore 1089 Lightning Test System
- Full hybrid waveforms according to the lastest GR-1089 Core section 4
- 1st and 2nd level lightning surges
- Integrated automatic coupling for 2 and 4 wire telecom system
Haefely VTM 15000/05 Impulse Transformer For Isolation Testing
- 1.2/50μs voltage impulse
- Output amplitude up to 15kV (PSURGE 8000 & PIM 100)
- Output amplitude up to 14kV (AXOS 8)