Related Products
Tescom 635 QuickBERT-T1 Bit Error Rate Test
- Transmits all standard T1 BERT patterns and loop codes
- Transmits HDSL loop codes
- Has the ability to insert logic, BPV, and frame bit errors
Fluke 675 Ethernet & Token Ring LanMeter
- Network Statistics: Shows Utilization, Errors and Broadcasts
- Error Statistics: Shows the defected errors by type and error count
- Protocol Mix: Shows a percentage-ranked listing of the top seven protocols
Keysight 71603B Error Performance Analyzer - BERT
- High performance 100 Mbit/s to 3 Gbit/s pattern generation and bit error ratio (BER) measurement
- 1 bit to 4 Mbit user programmable test patterns
- Low-phase-noise clock source
Keysight 81130A Pulse Data Generator
- 400/660 MHz single- or dual-channel pulse data generator
- 400 MHz, 3.8 V, 50 Ω into 50 Ω (81131A) or 660 MHz, 2.5 V, 50 Ω into 50 Ω (81132A)
- Pulse, burst, and pattern modes selectable
Keysight 86130A BitAlyzer® Error Performance Analyzer
- Integrated pattern generator Test high-speed digital components Test system hardware Customize your own patterns
- Test high-speed digital components
- Test system hardware
Viavi ANT-20se Advanced Network Tester
- Multi-rate transmission testing from DS1 to OC-192c and E1 to STM-64c
- Modular platform offering SONET, DSn, SDH, and ATM capabilities
- Large color touch screen display
Viavi ANT-5 SDH / PDH Access Tester
- Bit Error Rate testing
- Performance analysis according to international standards: G.821, G.826, G.828, G.829, M.2100,M.2101 and ANSI
- APS-measurement including Service Disruption
Tektronix BSA Series BERTScope Bit Error Rate Tester
- Integrated, calibrated stress generation to address the stressed receiver sensitivity and clock recovery jitter tolerance test requirements for a wide range of standards Sinusoidal jitter to
- Sinusoidal jitter to 100 MHz
- Random jitter
Tektronix BSX-BERTScope Series Bit Error Rate Testers (BERT)
- Provides a single solution for receiver stress testing, debugging, and compliance.
- Test Gen-3 and Gen-4 standards including PCIe, SAS, and USB 3.1 and proprietary standards.
- DUT handshaking capability above 16 Gb/s supporting RX test requirements for loopback initiation and adaptive link training for key standards such as PCIe.
Tektronix BSX125 Bit Error Rate Tester (BERT)
- Provides a single solution for receiver stress testing, debugging, and compliance.
- Test Gen-3 and Gen-4 standards including PCIe, SAS, and USB 3.1 and proprietary standards.
- DUT handshaking capability above 16 Gb/s supporting RX test requirements for loopback initiation and adaptive link training for key standards such as PCIe.
Tektronix BSX240 Bit Error Rate Tester (BERT)
- Provides a single solution for receiver stress testing, debugging, and compliance.
- Test Gen-3 and Gen-4 standards including PCIe, SAS, and USB 3.1 and proprietary standards.
- DUT handshaking capability above 16 Gb/s supporting RX test requirements for loopback initiation and adaptive link training for key standards such as PCIe.
Tektronix BSX320 Bit Error Rate Tester (BERT)
- Provides a single solution for receiver stress testing, debugging, and compliance.
- Test Gen-3 and Gen-4 standards including PCIe, SAS, and USB 3.1 and proprietary standards.
- DUT handshaking capability above 16 Gb/s supporting RX test requirements for loopback initiation and adaptive link training for key standards such as PCIe.
Rohde & Schwarz CBT Bluetooth Tester
- Qualified by the Bluetooth SIG for RF measurements
- Highly flexible troubleshooting in R&D
- Very short measurement times for high throughput in production
Anritsu CMA5000a OTDR Module
- Sophisticated analysis software provides consistent and accurate fiber characterization
- Dedicated testing modes simplify commonly performed tasks
- Easy to use for any skill level – from fault location to advanced fiber analysis
Tektronix Clock Recovery (CR) BERTScope Series
- Instrumentation quality clock recovery.
- Accurate, variable loop bandwidth from 100 kHz to 12 MHz, with optional 24 MHz for the jitter transfer function (JTF) bandwidths of USB.
- 3.0, SATA 6G, and PCIe Gen-3.
Tektronix CR125A Clock Recovery Instrument
- Instrumentation quality clock recovery.
- Accurate, variable loop bandwidth from 100 kHz to 12 MHz, with optional 24 MHz for the jitter transfer function (JTF) bandwidths of USB.
- 3.0, SATA 6G, and PCIe Gen-3.
Tektronix CR175A Clock Recovery Instrument
- Instrumentation quality clock recovery.
- Accurate, variable loop bandwidth from 100 kHz to 12 MHz, with optional 24 MHz for the jitter transfer function (JTF) bandwidths of USB.
- 3.0, SATA 6G, and PCIe Gen-3.
Tektronix CR286A Clock Recovery Instrument
- Instrumentation quality clock recovery.
- Accurate, variable loop bandwidth from 100 kHz to 12 MHz, with optional 24 MHz for the jitter transfer function (JTF) bandwidths of USB.
- 3.0, SATA 6G, and PCIe Gen-3.
Tektronix CSA907A 700 MHz Bit Error Rate Test Set
- Frequency Range
- Internal Clock Source: 150 Kb/s to 700 Mb/s
- External Clock: 150 Kb/s to 700 Mb/s Freq. Resolution (Internal Clock): 1 kHz Clock Output Amplitude: 500 mV to 2.0 Vp-p Clock Output Offset: -2.0 V to 1.8 V Data Output Amplitude: 500
Tektronix CTS710 SONET/DS3/DS1 Test Set
- STS-1, STS-3 (Electrical)
- STS-3c and OC-3c
- OC-1, OC-3, OC-12 (optical)
Tektronix DG2020 Data Timing Generator
- 200 Mbits/s maximum output data rate - Up to 64 K words/channel data word length
- Up to 36 output channels in 12-channel increments
- Up to 12 independent variable delay output (20 ns, 100 ps minimum resolution)
Viavi FST-2310 (2000 Module) TestPad
- Multi-rate transmission testing from DS0 to OC-48 in a single, handheld unit.
- Multi-service testing capabilities including ATM, GR-303, ISDN, signaling, voice frequency (VF), and digital data service (DDS).
- Ability to manipulate bytes in the SONET overhead.
EXFO FTB-1v2/Pro Single-Carrier Portable Test Platform
- FTB-1v2-Pro (A) Portable Modular mainframe with dual carrier configuration Windows 10 OS, QUAD Core CPU Multi-touch widescreen, color, 1280 x 800 TFT, 203 mm (8 in) RAM: 4
- Windows 10 OS, QUAD Core CPU
- Multi-touch widescreen, color, 1280 x 800 TFT, 203 mm (8 in)
EXFO FTB-2/Pro Platform
- FTB-2 with Features Listed Below FTB-2-PRO (A) 2-slot capacity PRO Modular mainframe Windows 10 OS, QUAD Core CPU Touchscreen, color, 1280 x 800 TFT, 256 mm (10.1
- 2-slot capacity PRO Modular mainframe
- Windows 10 OS, QUAD Core CPU Touchscreen, color, 1280 x 800 TFT, 256 mm (10.1 in) RAM: 4 GB Interfaces: RJ-45 LAN 10/100/1000 Mbit/s USB 2.0
EXFO FTB-200-S1 Compact Platform
- Connects anywhere: USB, 3G, Wi-Fi, VPN and Bluetooth
- Loaded with utilities: all the tools required to maximize field testing, plus third-party applications
- Like a PC: Intel processor with Windows Embedded Standard operating system
EXFO FTB-200-V2-S1 Compact OTDR Platform
- Connects anywhere: USB, 3G, Wi-Fi, VPN and Bluetooth
- Loaded with utilities: all the tools required to maximize field testing, plus third-party applications
- Like a PC: Intel processor with Windows Embedded Standard operating system
EXFO FTB-4 Pro Platform BERT/SONET/SDH
- Connects anywhere: USB, WiFi, Bluetooth, mobile and virtual private network (VPN)
- Loaded with utilities: equipped with all the tools required to maximize field testing
- Like a PC: quad-core processor with Windows 10 operating system
EXFO FTB-400 Universal Test System for Fiber Optic Networks
- Measures throughput, back-to-back (burstability), latency and frame loss as per RFC 2544
- EtherBERT™* for bit-error-rate testing of 10 Gigabit Ethernet circuits
- Performs packet jitter measurement (IP packet-delay variation as per RFC 3393) to qualify Ethernet transport networks for transmission of delay-sensitive traffic such as voice-over-IP (VoIP)
EXFO FTB-700G Series Optical, Ethernet and Multiservice Tester
- Dynamic range up to either 36 or 39 dB
- Test through high-port-count splitters (up to 1×128)
- Combined singlemode/multimode wavelengths
EXFO FTB-8510B Packet Blazer
- Complete EtherSAM (ITU-T Y.1564) test suite allowing full validation of today's Ethernet services (bidirectional results through dual test set)
- Throughput, back-to-back, latency and frame loss measurements as per RFC 2544 (bidirectional results through dual test set)
- Multi-stream generation and analysis, providing per-stream measurements for throughput, latency, frame loss and packet jitter
EXFO FTB-8510G Packet Blazer
- Measures throughput, back-to-back (burstability), latency and frame loss as per RFC 2544
- EtherBERT™ for bit-error-rate testing of 10 Gigabit Ethernet circuits
- Performs packet jitter measurement (IP packet-delay variation as per RFC 3393) to qualify Ethernet transport networks for transmission of delay-sensitive traffic such as voice-over-IP (VoIP)
EXFO FTBx-88400NGE Bit Error Rate Tester
- 400G Ethernet testing capabilities based on the IEEE 802.3bs standard
- State-of-the-art Open Transceiver System (OTS) design for full flexibility with current and future transceivers
- Flex Ethernet (FlexE) testing capabilities with low and high-speed Ethernet clients supported on 4xQSFP28 ports
EXFO FTBx-88460 Bit Error Rate Tester
- 400G Ethernet testing capabilities based on the IEEE 802.3bs standard
- State-of-the-art Open Transceiver System (OTS) design for full flexibility with current and future transceivers
- Flex Ethernet (FlexE) testing capabilities with low and high-speed Ethernet clients supported on 4xQSFP28 ports
Tektronix GB1400 Gigabert Bit Error Rate Tester
- Frequency Range Internal Clock Source: 1 Mb/s to 1400 Mb/s External Clock with Burst Mode: 150 kb/s to 1400 Mb/s
- Internal Clock Source: 1 Mb/s to 1400 Mb/s
- External Clock with Burst Mode: 150 kb/s to 1400 Mb/s
Tektronix GB700R Bit Error Rate Tester
- Operating Frequency Range 700 Mb/s
- Internal PLL Synthesized Clock Source
- PRBS 2n-1; n = 7, 15, 17, 20, 23
Keysight J2127A Field Transmission Test Set SONET/SDH
- Fully integrated all-rate SONET/SDH testing
- Multi-port, multi-rate Ethernet testing
- Full range of standard and concatenated mappings
Keysight J2298B T1 Simulate/Monitor Interface Card
- J2298B: balanced 100 ohms RJ-48C and WECO mini-Bantams
- ATM: B8ZS
- WAN: B8ZS, AMI
Keysight J2300C WAN Internet Advisor
- Complete protocol analysis for WAN testing with a powerfull and rugged personal computer.
- Monitor all major WAN communication protocols from 50 b/s to 2 Mbps
- Protocols: frame relay, ISDN, X.25, HDLC, SDLC, SNA, async PPP and encapsulated LAN protocols running over the wide area network
Keysight J2300D WAN Internet Advisor
- Complete protocol analysis for WAN testing with a powerfull and rugged personal computer.
- Monitor all major WAN communication protocols from 50 bps to 622 Mbps
- Protocols: frame relay, ATM, ISDN, X.25, HDLC, SDLC, SNA, async PPP and encapsulated LAN protocols running over the wide area network
Keysight J2300E Agilent Advisor WAN
Keysight J3444A LAN Internet Advisor
- 10/100 Mbps data rate with auto-negotiate
- 2 RJ-45 connectors with hub logic allows testing in switched environments
- MII connector for universal Fast Ethernet testing through external transceivers
Keysight J-BERT M8020A Bit Error Rate Tester (BERT)
- Data rates up to 8.5 and 16 Gb/s expandable to 32 Gb/s
- 1 to 4 BERT channels in a 5-slot AXIe chassis
- Integrated and calibrated jitter injection: RJ, PJ1, PJ2, SJ, BUJ, sinusoidal level interference
Keysight M8030A Multi-Channel BERT
- Data rates up to 8.5 Gb/s and 16 Gb/s
- Up to 10 BERT pattern generator and analyzer channels in a 14-slot AXIe chassis
- Integrated and calibrated jitter injection: RJ, PJ1, PJ2, SJ, BUJ, sinusoidal level interference
Keysight M8040A Bit Error Rate Tester
- Data rates from 2 to 32 and 64 Gbaud
- PAM-4 and NRZ selectable from user interface
- Built-in 4 tap de-emphasis to compensate loss
Anritsu MT1000A Network Master Pro | Ethernet / CPRI / OTDR
- Supported for 100G/25G Ethernet
- Supported for 100G/40G OTN
- Condensing the communication network opening maintenance technologies into one module: Ethernet, eCPIR/RoE/CPRI/OBSAI, OTN, Fibre Channel, SDH/SONET, PDH/DSn
Anritsu MT1100A Network Master Flex
- All-in-one transport tester – supports testing from 1.5 Mbps to 100 Gbps
- Up to 4 ports at all rates
- Easy and intuitive GUI
Keysight N1610B Service Advisor Test Tablet
- Modular: Supports 2 single or 1 dual test module Hot swappable
- Display: 6.4" diagonal 640 x 480 color VGA backlit Active matrix LCD
- User Interface: GUI, Touchscreen, Stylus, Navigation keys
Keysight N1655B Dual Line DS3/1, E3/1 Test Module
N1660A Dual Line DS1/0 Test Module
- Normal: Tx originates line code, framing and BERT pattern on full T1 span. Rx synchronizes to input.
- Internal Loop: Tx and Rx internally looped
- CSU: Responds to CSU loop codes. Sends framed All 1s until looped. T1 monitoring available.
Keysight N1680A-001 SONET/SDH Test Module
Keysight N1690A- 010 Test Module
Keysight J-BERT N4903B High-Performance Serial BERT
- Excellent precision and sensitivity for accurate measurements
- Choice of feature set and frequency classes to tailor to test needs and budget
- State-of-the-art user interfaces with color touch screen
Keysight N4960A Serial BERT 17 and 32 Gb/s
- Full data rate pattern generation and error detection
- Integrated clock source with calibrated stress capability
- Built-in selection of PRBS and common telecom/datacom test patterns
Keysight N4962A Serial BERT
- Internal and external clock system
- 0.5 to 12.5 Gb/s operation
- Multiple clock and pattern triggers
Fluke NetTool NT-IL Network Connectivity Tester
- Media Access: 10Base-T and 100Base-Tx
- Identifies: 10Base-T, 100Base-Tx (Full and half-duplex), Token Ring (4/16 Mbps), Phone* (tip and ring pins)
- Cable Tests: Wiremap, cable length, opens, shorts, and split pairs. Accuracy: ±10% for Cat 5 cable
Viavi ONT-506 Optical Network Tester
- Portable 40/43G (SDH/SONET/OTN) and jitter/wander test solution
- Combination of multiple technologies and multiple ports for fast and flexible testing
- Selection of plug-in instrument modules for SDH/SONET, PDH/DSn, OTN, EoS, Jitter, and Ethernet testing
NetScout OPTIVIEW-GIG Integrated Network Analyzer
- Complete network vision in seconds
- Combines seven layer protocol analysis, active discovery, SNMP device analysis, RMON2 traffic analysis and physical layer testing into a mobile solution
- Design and user interface equally effective whether the unit is carried as a portable device or placed semi-permanently on a network link
Tektronix PB200 Bit Error Rate Test Set
- Packet or Cell BER Testing
- DC to 200 Mbits/s Data Rate, NRZ-1
- 256 Kbits Programmable WORD, PRBS, 1's Density and Selectable Mixed Mode
Tektronix CTS750 SDH/PDH Jitter Test Set
- STM-1E (Electrical)
- STM-1, STM-4 (optical)
- Compliance to ITU-T G.707, G.708, G.709
Tektronix CTS 850 SDH/PDH and Jitter/Wander Test Set
- STM-0, STM-1 and STM-4 Transmit and Receive
- STM-16 Transmit and Receive (with ST2400A)
- VC4-4c Concatenated Payload Testing
Keysight N1729A ISDN Tester
- Simulation
- Monitoring
- Teleservice and Supplementary Service Tests
Keysight 83492A Optical clock recovery module
Viavi SC Home v3 Tester
- Coax Map feature and the Noise Immunity Test to assess quality and to troubleshoot issues in a coax network
- Active ID can delineate multiple runs of coax in the building even through coaxial splitters and can use the integrated wiring tools to qualify twisted pairs, including Cat3, Cat5, Cat5e, and Cat6
- Fully functional built-in butt-set that can test POTS voice delivery along with wiring identification and toning to locate and identify cables
Wavetek SDA-5000-1 Stealth Digital Analyzer
- Qualifies the network for today's high-growth subscriber services
- Reduces technician time for the most labor intensive maintenance and troubleshooting
- Spectrum display from 5 to 1,000 MHz with cable modem analysis (Zero Span mode)
Tektronix / Microwave Logic ST103 SDH / SONET Analyzer
- VT Channel Scan
- Multiple SONET Alarm Generation
- J1 Trace Byte Programming
Tektronix ST112 SONET Test Set
- OC-1/3/3c/12/12c Framing and Payload per Bellcore and ANSI Specifications
- Complete Overhead and Bit Error Rate Testing (BERT)
- Extended Control and Measurement Display via VT100 and RS-232 Support
Tektronix ST2400A STM-16/OC-48 2.4 Gbit/s Test Set for DWDM Applications
- Optimized for Dense Wavelength Division Multiplexing (DWDM) Transmission Quality Testing
- Available in Transceiver, Receiver and Transmitter Only Versions
- Tributary Testing of STM-64/OC-192 Systems
Viavi T-BERD 6000 Compact Optical Test Platform
- Lightweight platform at only 2.4 kg/5.3 lbs
- Large 8.4 inch transreflective TFT color display
- Graphical user interface with touchscreen option
Viavi T-Berd 8000 Scalable Multitest Platform
- Modular test platform
- High-speed PowerPC processor with 100 GB SATA hard disk
- High-visibility touch-screen display
VIAVI T-BERD/MTS 5800-100G Ethernet Network Tester
- Supports comprehensive rate testing ranging from DSx PDH (1.5M/2M) through to 112G OTU4.
- Saves time with the industry’s fastest RFC 2544 and Y.1564 SAMComplete™ Ethernet service activation test including nanosecond accurate latency measurements and supports RFC 6349
- Ensures QSFP+/QSFP28 and CFP4 modules run error-free with the field optimized Optics Self-Test.
Viavi T-BERD 6000a v2 BERT/MSAM
Tektronix TC2000 Protocol Analyzer
- Provides full-duplex, dual-port monitoring of data communications networks at speeds up to 72 Kbps and emulation up to 64 Kbps
- Standard Protocols: SDLC, SNA, HDLC, X.25, DDCMP, IPARS, and ISDN protocols: LAP-D, CCIS7, AND Q.931
- Features include: detailed protocol decoding split screen display, filtering, emulation/statistic/graphic programming, time stamping on character basis to 0.1 ms, 1 Mb capture buffer, lead state
Tektronix Y400 NetTek Analyzer
Tektronix YBA250 RF Antenna Analyzer
- Improve quality of service through preventative maintenance activities on antennas, before they become service-affecting
- Quickly analyze the most important antenna and transmission line problems
- Easy-to-Use Distance-to-Fault (DTF) measurements for locating antenna and transmission line trouble