Teseq 2145 45kVA 3-Phase Flicker and Harmonics Measuring System
- AC fast switching unit for standards specified in the IEC 61000-4-11
- Unit has two inputs, AC source and AC Mains
- Allows for single or three phase mode testing
California Instruments 2300CL Harmonics and Flicker Calibrator
- 2300W
- 100-240VAC
- 178 mm (7 inch) high-rack chassis
Dranetz 3105 Precision Power/Harmonic Analyzer
- Instant calculation of harmonic distortion of plus amplitude, percent and phase of each harmonic
- Calculation of power in Watts, VA or VAR and power factor, as well as network impedance
- Fast on-the-spot printed records with date and time recorded
Pacific Power 320ASX Single / Three Phase AC Power Supply | 2000 VA
- 22 Waveform Library – Arbitrary Waveform Generator
- 15 to 1,200 Hz Operation – 5,000 Hz Bandwidth
- Precision Voltage Programming – 0.05% with CSC engaged
California Instruments 5001iX AC Power Source
- Combination AC and DC Power Source and Power Analyzer
- 3000 VA - 15000 VA of Output Power
- Arbitrary Waveform Generation
Advanced Analyzers AA-HFA-1-16 | 1 ph, 16 A
- 16-bit USB based data acquisition: works with laptops and PC
- Very accurate Windows-7, 8, 10 compatible power analyzer with data storage
- Advanced reporting, data storage, and replay features
Advanced Analyzers AA-HFA-3-75-Z-REF-Z-TEST | 3 ph, 75 A
- 0 - 36 A-rms
- 0 - 100 A-pk for 10 seconds
- 1 - 15000 VA
EM Test ACS 500N2.3 Single Phase AC/DC Voltage Source, 2 kVA
- Voltage range: 0V to 330V AC/DC
- Voltage resolution: 0.025% (12 bit)
- Output frequency: DC, 10Hz to 80Hz
California Instruments CSW5550 Programmable AC/DC Power Source, 5550VA
- Combination AC and DC Power Source
- 40-5,000Hz Output Frequencies
- Arbitrary and Harmonic Waveform Generation
EM Test DPA 500N Single Phase Power Analyzer with Harmonics & Flicker
- Real-time data acquisition
- Internal hard disk for data storage
- 16-Bit A/D converter
EM Test DPA 503N Power Analyzer per IEC 61000-3-3, IEC 61000-3-11 and IEC 60725
- Real-time data acquisition
- Internal hard disk for data storage
- 16-Bit A/D converter
Pacific Power ECTS2-3500Z 50 kVA Power Source
- AC only or AC and DC Test Systems
- Single Phase and Three phase Output Modes
- Regenerative Systems Available
EM Test Harmonics & Flicker Test System for IEC/EN 61000-3-2/3-3
- Real-time data acquisition
- Internal hard disk for data storage
- 16-Bit A/D converter
CNS Poway HFA-16/75 1 Phase Harmonics & Flicker Analyzer
- ISO-17025 accredited device
- 16 bit USB based data acquisition
- PLL based sampling method
Advanced Analyzers HFA-3-36-REF Harmonics and Flicker Analyzer | 3 ph, 36 A
- Up to Harmonic 40
- Can be optionally selected to show 2 - 9 kHz
- 0 - 350 V-rms ±500 Volt peak std
Newtons4th IMP16 IEC Reference Impedance Network
Newtons4th IMP753 Impedance Network
Kikusui KHA1000 16A/1PH Harmonics/Flicker Analyzer for IEC 61000-3-2 & 3-3
- No need for a PC for compliance testing
- Customization of test conditions
- Easy-to-view screen and real-time measurement
Kikusui KHA3000 Harmonic/Flicker Analyzer for IEC61000-3-2/3/11/12, IEC61000-4/7/15
- Supports harmonic and flicker compliance testing of single-phase and three-phase equipment
- Installed with the latest standards of both harmonic and flicker limits
- No need for a PC for compliance testing
Pacific Power M6204 IEC Flicker Impedance Unit
- Three phase flicker impedance network
- Z-ref impedance values per IEC 60725
- Compatible with 360AMXT and 3120AMXT AC source models
California Instruments MX45 AC Power Source | 45 kVA, 3P
- Three Phase Mode Phase mode programming on MX30-3Pi and MX45-3Pi allows for a three-phase output
- Phase mode programming on MX30-3Pi and MX45-3Pi allows for a three-phase output
- High Power AC and DC Power Source Programmable AC and DC power for frequency conversion and product test applications
CA Instruments MX90 90kVA Power Source and Compliance Test System
- Combines AC/DC source and power analyzer functions
- AC, DC and AC+DC Operating Modes
- Powerful output transient generation
California Instruments MX Compliance Test System Series
- Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high speed data transfers, unlike competing
- PC based Harmonic and Flicker test software provides real-time full color data display updates and continuous PASS/FAIL monitoring.
- Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
EM Test Netwave Series, Single Phase AC/DC Power Source
- Wide Power Bandwidth; DC - 5kHz
- Output Power up to 7,500VA AC and 9,000W DC
- Output Voltage max. 360V AC and +/- 500V DC
EM Test 3-Phase Netwave Series AC/DC Power Supply
- Wide Power Bandwidth; DC - 5kHz
- Output Power up to 60,000VA AC / 72,000W DC
- Output Voltage up to 3*360V AC (p-n), +/-500V DC
Teseq NSG 1007 AC & DC Power Sources
- Combination AC and DC power source and power analyzer
- Arbitrary waveform generation
- Built-in digital power analyzer
Teseq NSG 1007-5 Single Phase AC and DC Power Source
- 5 kVA AC Source L-L three phase input
- Single phase output
- Arbitrary waveform generation
California Instruments PACS-1 Harmonics/Flicker Test System
- AC Line Distortion Compensation - PCTS Software compensates for AC Line distortion.
- PC Based Operation - Simple to use Windows GUI automates and documents test procedures and easily accommodates future IEC standard changes.
- Upgradable to Full Compliance Level - PCTS can be field upgraded to full compliance by adding a California Instruments AC Power Source.
Newtons4th PPA5531 Flicker and Harmonics Analyzer
- Fully Compliant Harmonics and Flicker Test Solutions
- Leading wideband accuracy Basic 0.01% with class leading high frequency performance
- ISO17025 accredited ISO17025 IEC61000 certification available
Teseq ProfLine 2100 Harmonics and Flicker Measuring System
Teseq Profline 2103 3 kVA Harmonics & Flicker Measuring System
- Low cost system for small DUTs
- Complete test system including clean power source
- Simulated flicker impedance, no need for expensive physical impedance
Teseq Profline 2105 | 1 ph, 5 KVA
- 5 kVA output power
- Immunity test system that is simple to upgrade, pc-based
- Accessible control interface
Yokogawa WT3000 Precision Power Analyzer
- Basic accuracy: 0.01% of reading
- Basic power accuracy: 0.02% of reading
- 30A current input element
Yokogawa WT5000 Precision Power Analyzer
- Unmatched basic power accuracy of ±0.03%
- 10 MS/s, 1MHz power bandwidth, 18 bit resolution enabled by Yokogawa isoPRO™ fiber optic isolation technology
- Precision current measurement guaranteed by innovative symmetric coaxial shunt design