Anritsu S362E Site Master Cable & Antenna Analyzer

The Anritsu S362E Site Master Cable & Antenna Analyzer is a cable sweeper device essential for conducting Cable Loss and Insertion Loss testing, as well as VSWR testing and Return Loss testing. This device operates at a frequency range of 100kHz to 6 GHz as a spectrum analyzer and a range of 2 MHz to 6 GHz as a configurable cable and antenna analyzer. Anritsu S362E are multi-functional test instruments, featuring 2-port transmission measurement, a 32V bias tee and high-accuracy power meter and interference analysis.

Product Info Product Options

Spectral Purity
SSB Phase Noise @ 1 GHz	–100 dBc/Hz, –110 dBc/Hz typical @ 10 kHz offset –105 dBc/Hz, –112 dBc/Hz typical @ 100 kHz offset –115 dBc/Hz, –121 dBc/Hz typical @ 1 MHz offset
Amplitude Ranges
Dynamic Range	> 95 dB (2.4 GHz), 2/3 (TOI-DANL) in 10 Hz RBW
Measurement Range	DANL to +26 dBm
Display Range	1 to 15 dB/div in 1 dB steps, ten divisions displayed
Reference Level Range	–120 dBm to +30 dBm
Attenuator Range	0 to 55 dB, 5.0 dB steps
Maximum Continuous Input	+35 dBm
Amplitude Units	Log Scale Modes: dBm, dBV, dBmv, dBμV Linear Scale Modes: nV, μV, mV, V, kV, nW, μW, mW, W, kW
Amplitude Accuracy
100 kHz to 4.0 GHz	± 1.25 dB, ± 0.5 dB typical
> 4.0 GHz to 6 GHz	± 1.50 dB, ± 0.5 dB typical

Cable & Antenna Analyzer: 2 MHz to 6 GHz
Spectrum Analyzer: Spectrum Analyzer
Return loss, VSWR, cable loss, DTF
2-port transmission measurements with 32V bias tee
1-port phase, Smith chart
Optical DTF measurements
PIM 3 ^rd, 5th and 7th Order Frequency measurements
Dual display mode capabilities
Built-in, editable signal standard and cable standard lists
Trace overlay and trace math to monitor changes with - Reference traces
Marker table with automatic peak/valley markers
GPS tagging
Limit lines and alarming for providing reference standards
GPS tagging of data to verify location of tests
Master Software Tools for post-analysis and report generation

Cable & antenna installation and maintenance for wireless service providers, contractors, military, aerospace and defense, and public safety applications
2-port measurements of tower mounted amplifiers, duplexers, diplexers, filters
Phase matching cables
Antenna tuning
Spectrum monitoring
Transmitter verification: occupied bandwidth, channel power, adjacent channel power ratio
Interference analysis of cellular system, land mobile radio systems, wi-fi
Signal strength mapping
Field analysis of 2G/3G/4G signals
Field strength measurements
CPRI RF measurements
OBSAI RF measurements