Skip to Content
800-404-2832

No results found

ATEC is highlighting some newly available Power Electronics & Electrical equipment rentals. All are in stock and available to rent now.
 

ITECH Solutions 

ITECH IT8015-80-450 Regenerative DC Electronic Load

ITECH-IT8015-80-450-(1).jpg

  • Voltage: 80 V
  • Current: 450 A
  • Power: 15 kW
  • Recover DC energy to local grid with efficiency up to 95%
  • Built-in waveform generator, support generating arbitrary waveforms
  • Power accumulation function
  • Battery test function, short circuit test function

ITECH-IT8015-80-450-(2).jpg
 

ITECH IT8624 AC/DC Electronic Load

ITECH-IT8624.jpg

  • Voltage: 50 - 420 V
  • Current: 80 A
  • Power: 7200 VA
  • Measure Vrms, Vpk, Vdc, Irms, Ipk, Idc, W, VA, VAR,CF, PF and FREQ
  • Parallelable up to 43.2 kVA
ITECH-IT8624-(1).jpg

 

ITECH IT6018C-1500-40 Bidirectional Programmable DC Power Supply

ITECH-IT6018C-1500-40.png

  • Up to 1500 V
  • Up to 40 A
  • Up to 18 kW Power
  • Source and sink with energy regeneration
  • Partial pre-compliant with LV123, LV148, DIN40839, ISO-16750-2, SAEJ1113-11, LV124 and ISO21848 testing standards
ITECH-IT6018C-1500-40.jpg

 

Hipot Tester

Hipotronics 880PL-HD Digital DC Hipot Tester

HIPOTRONICS_880PL-HD-(1).jpg

  • Voltage: 0.4 - 80 kV DC
  • Current: 10 mA
  • Polarity: Negative Output, Positive Ground
  • DUT Insulation Resistance: 10kΩ-40GΩ
Hipotronics-880PL-HD.jpg

Relay Test Set

Doble F6150e Protective Relay Test Set

Doble-F6150e-(1).png

  • Frequency Range: DC, 0.1 Hz - 2.0 kHz, Continuous full load
  • Bandwidth: DC - 3 kHz at full power
  • Performs state simulation and transient testing
  • Delivers full VA power with resistive, inductive and capacitive loads at maximum current rating (6x35, 3x70, 1x210 amps)
  • Fulfills IEC 60068-2-27, IEC 60068-2-6, IEC 60068-2-2, IEC 60068-2-1, IEC 60068-2-30, EN 61000-6-2, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-11, IEC 801-2
Doble-F6150e.jpg
                                                                                                                                               

Electric motor Analyzer

Baker AWA-IV/12HO Static Motor Analyzer

 Baker-AWA-IV-(1).png
  • Voltage: Up to 12 kV
  • Current: Up to 800 A
  • Pulse Energy: 7.2 J
  • High Output Unit for heavy duty testing (low turn-count windings)
Baker-AWA-IV.jpg

If you have any questions or interest in renting these products please feel free to reach out to Kathy Adams or Jaime Arreola.

Kathy: 800 404 2832 ext. 311 or kadams@atecorp.com
Jaime: 800 404 2832 ext. 317 or jarreola@atecorp.com

June 03, 2024