Adaptive Power Systems 4 Series Programmable Modular DC Electronic Loads
- Max. Power 300W per Module
- Wide Voltage Range, 0 - 500 Vdc
- Max. Current Range 60 Adc
Adaptive Power Systems 5VP Series High Power Programmable DC Loads
- Up to 60kW per Cabinet
- Low Voltage Range, 0 - 6 Vdc
- Voltages up to 1000Vdc
Chroma 17011 Programmable Charge/Discharge ATS
- High-accuracy current output & measurement up to 0.02%
- Linear circuit design, low ripple current
- Long term stability suitable for life cycle testing
Chroma 17020 Regenerative Battery Pack ATS
- Regenerative Battery Energy Discharge Energy saving Environment protection Low heat output
- Energy saving
- Environment protection
Chroma 17030 Regenerative Battery Pack ATS
- Regenerative battery energy discharge Energy saving Environment protection Low heat output
- Energy saving
- Environment protection
Chroma 17040 Regenerative Battery Pack Test System
- Conforms to international standards for battery testing: IEC, ISO, UL, and GB/T, etc.
- Regenerative battery energy discharge (Eff. >90%, PF >0.95, I_THD <5%)
- 4 voltage and current ranges for auto ranging function to provide optimum resolution
Pacific Power 3210AGX | AC & DC Load/Power Supply | 21 kVA
- 3-in-1 grid simulator, power source, and load
- 4 quadrants
- Fully regenerative
Pacific Power 3210RGS-4C Regenerative Grid Simulator
- 12kVA / kW to 21kVA / kW in 4U chassis
- Parallel up to 168kVA/kW 333A per cabinet
- Dual cabinets up to 252 kVA / kW
Pacific Power 3210RLS-4W AC/DC Load Simulator | 21 kVA
- Four Quadrant Operation with energy recovery back to the grid
- Standard Models in Power Levels from 6kVA to 21kVA. Parallel units up to 168kVA/kW per cabinet. Dual cabinets up to 252kVA/kW.
- Ultimate Flexibility with 6 configurations: 1, 2 or 3 Phase, dual or triple independent outputs/inputs, single + split outputs/inputs.
NH Research 4700 Series DC Loads
- 120V, 1kW/200A to 36kW/7200A
- 18 Voltage, Current, Power and Timing Measurements
NH Research 4760 High Voltage Electronic DC Load | 600 V, 300 A
- 600 Volts, 300 Amps - Paralleling capability up to 1800 Amps or 36 kW
- 18 Voltage, Current, Power and Timing Measurements
- Complex load profile playback
NI (NH Research) 4800 Bidirectional Power Supply | 80 VDC 16.5kW (to 165kW)
- Fully integrated battery cycler: built-in isolation contactor relays, pre-charge circuit, reverse polarity checker
- Voltage models from 80 VDC
- Modular and scalable power
Keysight 60501A Electric Load Module
Keysight 60501B Electric Load Module
- Analog voltage control in constant current mode
- Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity
Keysight 60502A Electronic Load Module
- Maximum power of 300Watts
- 3 to 60V @ 60A
- Built-in IEEE-488 interface
Keysight 60502B DC Electronic Load 3 V - 60 V, 60 A, 300 W
- Analog voltage control in constant current mode
- Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity
Keysight 60503B Electronic Load Module
- Analog voltage control in constant current mode
- Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity
Keysight 60504A DC Electronic Load Module
- Output 1, Volts / Max. Current of 60Volts to 120Amps
- Load Regulation V/C of 10mA
- Total Power of 600W
Keysight 60504B DC Electronic Load Module
- Analog voltage control in constant current mode
- Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity
Keysight 6050A DC Electronic Load Mainframe 1800 W
- HP-lB control of current, voltage, and resistance
- HP-lB readback of current, voltage, and power
- Built-in pulse waveform generation with programmable amplitude, frequency, duty cycle, and slew rate
Keysight 6060B Single-Input DC Electronic Load 60 V, 60 A, 300 W
Chroma 62180D-100 Bidirectional DC Power Supply | 100 V, 18 kW
- Voltage rating of 20 to 100 V
- Current rating of 0 to 540 A
- Power rating of 18 kW
Chroma 62180D-1800 Bidirectional DC Power Supply
- Two-quadrant operation: source and load functions
- High power density: 18 kW in 3 U
- Easy master/slave parallel & series, 1 operation up to 180 kW
Chroma 62180D-600 Bidirectional DC Power Supply | 600 V, 18 kW
- Voltage rating of 120 to 600 V
- Current rating of 0 to 120 A
- Power rating of 18 kW
Chroma 63030 DC Electronic Load | 300 W
- Smart DC Electronic Load
- Maximum power of 300 W
- Maximum voltage of 64 V
Chroma 63103A DC Electronic Load Module 80 V, 60 A, 300 W
- Up to eight channels in one mainframe, for testing multiple output SMPS
- Parallel load modules up to 1200W for high current and power applications
- Synchronization with multiple loads
Chroma 63105A DC Electronic Load Module 500 V, 10 A, 300 W
- Up to eight channels in one mainframe, for testing multiple output SMPS
- Parallel load modules up to 1200W for high current and power applications
- Synchronization with multiple loads
Chroma 63108A DC Electronic Load Module 500 V, 20 A, 800 W
- Up to eight channels in one mainframe, for testing multiple output SMPS
- Parallel load modules up to 1200W for high current and power applications
- Synchronization with multiple loads
Chroma 63110A LED Load Simulator
Chroma 6312A DC Electronic Load Mainframe
Chroma 6314A DC Electronic Load Mainframe 4 Slots
- Max Power: 200W, 100W×2(Dual), 30W & 250W, 300W, 600W, 1200W
- Wide range 0~500V operating voltage
- Compatibility between 6310 and 6310A
Chroma 63200A High Power DC Electronic Loads
- Up to 20 units master/slave parallel control
- Dynamic synchronous control in static and dynamic loads
- User defined waveform (UDW)
Chroma 63201 DC Electronic Load
- Power 260W 2600W
- Current 0-30A 0-300A
- Voltage 1-80V
Chroma 63202 DC Electronic Load, 2.6 kW, 50A, 500V
- Power Rating: 2600W
- Voltage range: 0 ~ 500V
- Current range: Up to 50A
Chroma 63203 DC Electronic Load 1 to 80 V, 600 A, 5200 W
- Voltage range: 1-80V
- Power Rating: 5200W
- Current range: Up to 600A
Chroma 63204 Volt DC Electronic Load
- Dynamic loading: Up to 20 kHz
- Only need 1 V to draw rated current
- Programmable slew rate, up to 41 A/µS
Chroma 63205 DC Electronic Load 80 V, 180 A, 6.5 kW
- CC, CR, CV, CP load modes
- Master/Slave paralleling control mode, allow synchronous load control under static and dynamic loading mode (Up to 93.6kW)
- Dynamic loading : Up to 20kHz
Chroma 63206 DC Electronic Load 80 V, 600 A, 10.4 kW
- CC, CR, CV, CP load modes
- Master/Slave paralleling control mode, allow synchronous load control under static and dynamic loading mode (Up to 93.6kW)
- Dynamic loading : Up to 20kHz
Chroma 63206A-1200-240 DC Load
- 1200 V / 6 kW
- High precision and accuracy
- Up to 10 units master/slave parallel control
Chroma 63206A-600-420 DC Load | 600 V, 420 A
- 600 V and 6 kW
- High precision and accuracy
- Up to 10 units master/slave parallel control
Chroma 63207 DC Electronic Load 80 V, 30 A, 1040 W
Chroma 63208 DC Electrical Load 80 V, 60 A, 1560 Watts
Chroma 63209 DC Electronic Load | 15 kW, 80 V
- 15 kW, 1000 A, 80 V DC electronic load
- Four modes for different applications: CC, CR, CV, CP
- Master/Slave parallel control capability
Chroma 63210 DC Electronic Load 500 V, 150 A, 14.5 kW
- CC, CR, CV, CP load modes
- Master/Slave paralleling control mode, allow synchronous load control under static and dynamic loading mode (Up to 93.6kW)
- Dynamic loading : Up to 20kHz
Chroma 63211 DC Electronic Load 1000 V, 150 A, 15.6 kW
- CC, CR, CV, CP load modes
- Master/Slave paralleling control mode, allow synchronous load control under static and dynamic loading mode (Up to 93.6kW)
- Dynamic loading : Up to 20kHz
Chroma 63212 Programmable DC Electronic Load
- 150A, 1000V, or 10 kW max.
- CC, CR, CV, CP, Dynamic load modes
- Master/Slave paralleling control mode, allow synchronous load control under static and dynamic loading mode (Up to 93.6kW)
Chroma 63212E-150-1200 DC Load
- Rated power: 2kW, 3kW, 4kW, 5kW, 6kW, 8kW, 10kW, 12kW, 15kW, 18kW, 20kW, 24kW
- Voltage range: 150V, 600V, 1200V
- Current range: 2000A max.
Chroma 63224A Programmable DC Electronic Load | 1,200 V, 960 A or 600 V, 1,680 A
- Multiple operation modes
- Up to 10 units master/slave parallel control
- Dynamic synchronous control in static and dynamic loads
Chroma 63600 Series Modular DC Electronic Load
- Max. Power : 100W x 2(Dual), 300W, 400W
- Voltage Range : up to 80V
- 5 module mainframe Max. 2000W, load modules up to 400W/ea
Chroma 63630-600-15 DC Electronic Load 600 V, 15 A, 300 W
Chroma 63610-80-20 DC Electronic Load 80 V, 20 A, 100 W
- Up to 10 channels in one mainframe,fit for testing multiple output SMPS
- 0.4V @ 80A (Typical) low voltage operating characteristics
- Flexible CC, CR, CV and CP operation modes
Chroma 63630-80-60 DC Electronic Load 80 V, 60 A, 300 W
- Up to 10 channels in one mainframe,fit for testing multiple output SMPS
- 0.4V @ 80A (Typical) low voltage operating characteristics
- Flexible CC, CR, CV and CP operation modes
Chroma 63802 | 350 V, 18 A, 1800 W
- Power rating of 1800 W
- Parallel / 3-phase function
- Constant & rectified load modes for AC loading
Chroma 63803 AC/DC Electronic Load
- Â 1800W
- 50V ~ 350Vrms
- 45 ~ 440Hz
Chroma 63804 AC/DC Electronic Load | 350 V, 45 A, 4500 W
- Parallel / 3-phase function
- Constant & rectified load modes for AC loading
- Analog voltage & current monitor
Megger Torkel 840 DC Battery Load Tester
- "In Service" batteries can be tested
- Load currents in the test parameters are included as the unit adjusts
- Adjustable alarm and shutdown points to prevent excessive discharge
B&K Precision 8500 Series Programmable DC Electronic Loads
- Constant current (CC), resistance (CR), voltage (CV) and power (CP) operation.
- 8500 Series contains models with wide voltage and current range, 0 to 500 V, 0 to 240 A (5000 W max).
- Built-in transient generator.
B&K Precision 8524 Programmable DC Electronic Load 60V, 240A, 5000W
B&K Precision 8526 Programmable DC Electronic Load 500V, 120A, 5000W
B&K Precision 8622 Programmable DC Electronic Load 110/220V, 50/60Hz
- Voltage range up to 500V
- Current range up to 720 A
- CC/CV/CR/CW operating modes
NH Research 9210 Single Channel DC Test System | 40 V, 600 A or 600 V, 40 A
- Smaller footprint makes it easier to move within a lab (roughly half the size of the 9200)
- Custom waveform/profile generation
- Sub-mS voltage, current & mode transition times
NH Research 9300 High-Voltage Battery Test System | 1200 V, 100 kW – 2.4 MW
- Wide-operating envelope of 100kW per cabinet High-voltage range up to 1200 V & 167 A High-current range up to 333 A & 600 V
- High-voltage range up to 1200 V & 167 A
- High-current range up to 333 A & 600 V
Magna-Power ALx Series Air Cooled Linear DC Electronic Load
- MagnaLINK™ Distributed DSP Architecture
- 16-bit digital programming and monitoring resolution
- Many control modes, including: voltage, current, power, resistance
Chroma C8000 LED Power Driver Test System
- Output voltage
- Output current
- Ripple Current (RMS & p-p)
Chroma C8000 SMPS Auto Test System
- Open architecture software platforms
- Test command optimizer helps to improve test speed
- Capable of testing almost any power supply or related device
Aviation DCLB-28 28.5 VDC Load Bank | 300-1500 Amps
- 300 A continuous load
- 1500 A decreasing load
- Timer bypass switch
Transistor Devices DLP50-150-3000 Pulse/Steady State Electronic Load
Transistor Devices DLR400-15-2500 DC Load
Transistor Devices DLR50-15-150A Electronic Load
Transistor Devices DLVP-130-250-2500 Electronic Load
Elektro-Automatik EA-EL 9000 DT DC Load Series
- Multilingual color touch panel
- User profiles, true function generator
- Adjustable protections: OVP, OCP, OPP
Intepro Systems ELR 9000 Electronic DC Loads with Energy Recovery
- Energy recovery of the supplied DC energy into the local or public grid
- Galvanically isolated DC input
- Input power ratings up to 10.5 kW per chassis
Intepro Systems ELR 91000-30 Electronic DC Load with Energy Recovery 1000V, 30A
- Energy recovery of the supplied DC energy into the local or public grid
- Galvanically isolated DC input
- Input power ratings up to 10.5 kW per chassis
Amrel FCL Series Electronic Loads For Fuel Cell Testing
- Embedded FRA (Frequency Response Analyzer) Without the Hassles of External Cables
- Built-in Booster Power Supply to Test Down to 0Vdc at Full Operating Current
- Fully Integrated 200W, 400W, 800W and 1.5kW Air-cooled Electronic eLoad
ITECH IT6642C-1200-200 Programmable Bidirectional DC Power System | 1200VDC / 200A / 42kW
- Dual Channel: Allows simultaneous output with independent control.
- Bidirectional Functionality: Serves both as a power supply and an electronic load.
- Energy Recycling: Efficiently feeds energy back into the grid.
ITECH IT8015-80-450
- Regenerative up to 95% efficiency
- High power density and output of 15 kW with a 3U chassis, expandable up to 2 MW by paralleling
- Power accumulation function, list function, battery test function
ITECH IT8018-500-120
- Regenerative up to 95% efficiency
- High power density and output of 18 kW with a 3U chassis, expandable up to 2 MW by paralleling
- Power accumulation function, list function, battery test function
ASCO K492 Resistive DC Load Bank 150 A
- Flexible and Simple Operation
- Compact, Portable, Lightweight
- Easy to Read Meters
ASCO K571 Resistive Portable Load Bank 200 A
ASCO K576 Resistive Portable Load Bank 500 A
- Lightweight Construction
- Durable Load Elements
- Portable with Lifting Handles
Cannon Load Banks L-48-500 Load Bank 48 VDC, 500 A
- Load Steps: 100 A, 100 A, 100 A, and 100 A fixed steps, 0 - 100 A adjustable step
- Plug test pins for connecting test leads
- Meters: 0 -75 V voltmeter, 0 - 500 A ammeter
Eagle Eye LB-Series SMART DC Load Banks
- LED display for voltage, current, and test duration
- Three test conditions for discharge auto-stop: Test Time, End Voltage,
- Exceeded Capacity, and Cell Voltage*
Amrel LPL Series Low-Profile Programmable Electronic Loads
- Broadest Model Selection: 150W, 300W, 600W, 800W Models: 60V, 120V, 400V, 600V, 800V
- Save Rack Space: All LPL Models are 1U high & "Zero" Stackable
- Maximize ROI: In-rack Closed-case Calibration
Maynuo Electronic Load M9718E | 6kW, 0-600V, 0-120A
TDI Power MCL488 3500W Mult-Channel Loads
- Front Panel, Analog IEEE 488, or RS232 Control
- 60 Amp, 350 Watt Modules 30 Amp, 175 Watt Modules
- Channels in 50V, 100V, 400V, or 600V Configurations
Keysight N3300A DC Electronic Load 1800 Watt
Instek PEL-300 Programmable Electronic DC Load
- Simple operation with smart push buttons
- High resolution (20mV, 20mA, 0.33mΩ)
- With high voltage, current and power overload prevention functions
Amrel PEL600-600-60 Programmable Electronic Load 600 V, 60 A, 600 W
Kikusui PLZ 5 kW DC Electronic Load System
- Wattage: 0 to 1000 W
- Current: 0 to 200A
- Voltage: 1.5 to 150 Vdc
Kikusui PLZ-4WL Series High Speed-Large Current DC Electronic Load (CC/CV/CR/CP)
- Realizing low voltage operation
- Convenient feature for discharge testing
- Accurate low-rate discharge by the low-range (1/100)
Kikusui PLZ1002W Electronic Load 1000W 3-110V 200A
- 1000 watt electronic load
- Voltage range 3-110V
- Current range 0-200A
Kikusui PLZ1003W 1000W DC Electronic Load
- A multiple number of setting conditions can be stored in memory for instant setting capabilities
- Ammeter, voltmeter and power meter
- Sequence function allows setting conditions to be changed automatically
Kikusui PLZ1004W Multifunction DC Load
- Wattage: 0 to 1000 W
- Current: 0 to 200A
- Voltage: 1.5 to 150 Vdc
Kikusui PLZ153W 150 Watt Electronic Load
Kikusui PLZ2004WB Booster Unit for PLZ1004W
Kikusui PLZ303W Electronic Load
- A multiple number of setting conditions can be stored in memory for instant setting capabilities
- Ammeter, voltmeter and power meter
- Sequence function allows setting conditions to be changed automatically
Kikusui PLZ6000R Regenerative Load | 6 kW
Transistor Devices RBL488-400-600-4000 Dynaload 400 V, 600 A, 4000 W
- High Speed Adjustable Slew Rate
- Front Panel or Remote Control
- 19 inch Rack Mount - 5U high
Transistor Devices RBL488-600-200-6000 Dynaload 600 V, 200 A, 6000 W
- High Speed Adjustable Slew Rate
- Front Panel or Remote Control
- Operation to Less Than 200mv
California Instruments RS High Power AC DC Power Source Series
- High Power AC and DC Power Source: Programmable AC and DC power for frequency conversion and product test applications
- Expandable Power Levels: Available output power of 90 kVA per unit and multi-unit configurations for power requirements up to 540 kVA and above
- Arbitrary & Harmonic Waveform Generation: User defined voltage waveform and distortion programming
Keysight SL1550A
- Automate RFID swiping and push button interaction (physical buttons or touch-based UI)
- Up to five actuators are supported
- External mode (remote control via host PC)
Eagle Eye SLB-24/48-300/600 DC Load Bank
- Safely monitor live tests remotely with wireless communication to the SLB load bank
- DataView software includes live monitoring, data recording, and report exporting to Microsoft Excel
- Discharge auto-shutdown for time duration, total string voltage, capacity, and individual cell voltage
Tesco T4350 EVSE Test System
- EVSE test system
- DC current capabilities up to 350 A
- Integrated GPS system
Megger Torkel 820 12, 24, 48 Volt DC Battery Load Unit
- External measurement input used to measure current in an external path by means of a clamp-on ammeter or a current shunt.
- Alarm output equipped with a relay contact for triggering an external alarm device.
- Start/Stop input used for starting and stopping discharging from an external device. Galvanically isolated.
Megger Torkel 860 Battery Bank Load Tester
- Batteries can be tested "in service"
- Unit adjusts to include load currents in the test parameters
- User adjustable alarm and shutdown points to avoid excessive discharge
Megger Torkel 950 Battery Load Unit
- Display range: 0.0 to 2999.0 A
- Basic inaccuracy: ±(0.5% of reading +0.1 A)
- Resolution: 0.1 A
Tesco TS400 Electric Vehicle Service Equipment (EVSE) Test System
- Uses EVSE Connector J1772:201602 (18KW AC; 75KW DC)
- Inlets: Tesla, CHAdeMo, CCS1
- Easy to use - select a site and press "test"
Simplex Watt-Muncher DC Resistive Portable Load Bank 32 V, 70 A
Transistor Devices XBL-600-200-6000 Dynaload
- Excellent Programming Accuracy
- High Speed Programmable Slew Rate
- Ethernet Control