Tektronix A6303 AC/DC, Split Core Current Oscilloscope Probe
This oscilloscope probe is an accessory and is only available to rent with an oscilloscope.
See All Oscilloscopes
The Tektronix A6303 AC/DC, Split Core Current Oscilloscope Probe offers a wide range of current measurement capability for the lab and bench environment. The A6303 measures higher amplitude, lower frequency currents, it clips onto conductors up to 21.1 mm (083 in,) in diameter. Its frequency range is DC to 15 MHz It will measure continuous currents up to 100 A and peak currents up to 500 A, as long as the amp/second product of 10,000 A/μs is not exceeded. The A6303 is also compatible with the 11A16 2-CH Current Probe Amplifier for the 11000 and DSA Series Oscilloscopes. With the 11A16, the A6303 is rated for 525 A.
| A6303 with AM503 (Current Probe Amplifier) | |
| Sensitivity: Scope @ 10 mV/div | 10 mA/div to 50 A/div |
| Bandwidth | Dc to 15 MHz |
| Rise Time | 23 ns |
| Max Ac Current CW | 200 A p-p |
| Derated Above | 20 kHz (12 A @ 10 MHz) |
| Maximum Current (Peak Not To Exceed A-S Product) | 500 A |
| A-S Product | 10,000 x 10-6 |
| Insertion Z | 0.02 ohms @ 1 MHz |
| 0.15 ohms @ 15 MHz | |
| Max Hardware Volts | 700 V |
| Max Conductor Diameter | 0.83 inch |
| Cable Length | 2 m |
| Magnetic Susceptibility | 25 mA/Gauss |
- 100 A Ac and Dc Current Measurements
- Peak Pulse Measurement to 500 A
- Ac or Dc Coupling
- 25 x 21 mm (1 x 0.83 in) Jaw Opening