Related Products
Testo 300 Combustion Analyzer
- Large scratch-resistant 5" HD display with smart-touch operation and replaceable protective film
- Stored, intuitive menus for all relevant measurements
- 4 strong magnets with rubber coating for material-friendly mounting
Testo 330-2G LX Industrial Combustion Analyzer Kit 2 with NOx Measurement
- Calculates NOx
- Over-range sensor protection
- Built-on dilution systems allows for CO readings to 30,000 ppm
Testo 350 Portable Emission Analyzer
- Increased measurement range for unlimited measurements, even when gas concentrations are higher
- Easy to change gas sensors / easy to access parts
- Sealed housing / built in impact protection
Thermo Fisher Scientific 42iQ NO-NO2-NOx Analyzer
- Predictive Diagnostics Address problems before they occur with improved serviceability and plug and play components. 24/7 access to analyzer’s information helps
- Address problems before they occur with improved serviceability and plug and play components. 24/7 access to analyzer’s information helps minimize troubleshooting time with
- Proactive Communications Maintain optimum performance through iQ360 and email alerts. When subscribed to iQ360 service, your instrument communicates directly to our
Teledyne API 430 Compact Ozone Monitor
- Proven UV absorption bench used in popular line of industrial ozone products
- Highest quality of construction
- Rugged and lightweight ABS polycarbonate chassis with handle
Thermo Fisher Scientific 43iQ Sulfur Dioxide Analyzer
- Utilizes pulsed fluorescence technology to measure the amount of sulfur dioxide in the air
- Pulsing of the UV source lamp serves to increase the optical intensity - greater UV energy throughput and lower detectable SO2 concentration
- Reflective bandpass filters allow for increased detection specificity and long term stability
Horiba APOA-370 Air Pollution Monitor
- Ambient O₃ monitor
- Cross flow modulation type
- Ultraviolet absorption method in conjunction with the comparative calculation method
Gasmet DX4000 Portable FTIR Gas Analyzer
- MCERTS certified
- Portable and easy set-up
- No sample pre-treatment needed
RKI Instruments Eagle 2 6-Gas Sample Drawing Monitor
- Monitor up to 6 different gases
- PPM, % LEL, or % Vol. auto-ranging combustible detection
- Specialty Sensors PID (Photoionization Detector) Low or high range for VOC detection Fence Electrode Technology for humidity and contamination
Bacharach ECA 450 Environmental Analyzer
- Measures up to 7 gases simultaneously (minimum O2 and CO), including NOx, SOx and combustibles
- Sensors are easily replaced or upgraded in the field
- Rugged suitcase design with large, easy-to-read display
KANE EGA-5 Gas Exhaust Analyzer
- Large graphic display
- Unique NDIR sensors for accurate measurements with fast warm up
- Connect to KANE LIVE & 3rd party apps
FLIR G346 Optical Gas Imaging Camera
- Optical gas imaging camera
- Primarily used for detecting carbon monoxide (CO) and several other gases
- Spectral range of 4.52 μm to 4.67 μm
FLIR GF320 Infrared Camera for Methane/VOC Detection
- CH4 gas leak detection
- Inspections are up to nine times faster than with traditional tools
- Increase worker safety
Teledyne GMI OXYGAS P-500 (Rechargeable) Leak Detector
- Combustible Gas Indicator (CGI) and Purge modes
- Simple 2-button operation, allowing user access to all features
- Audible and Visual Geiger (Ticker) in PPM range
Gasmet GT5000 Terra Portable Gas Analyzer
- 20.7 lb with battery (9.4 kg)
- 17.6 lb without battery (8.0 kg)
- Portable and quick set-up
Gasmet GT6000 Mobilis Portable Gas Analyzer
- Portable, mains powered high performance gas analyzer
- Typically set up to measure H2O, CO2, CO, NO, NO2, N2O, SO2, NH3, CH4, HCl, HF, and different VOCs
- Can measure up to 50 gases simultaneously
RKI Instruments GX-6000 PID Gas Monitor
- 6 Operating modes
- Smallest 6 gas sample draw
- 2 Interchangeable smart sensor slots
FLIR Gx320 Optical Gas Imaging (OGI) Camera
- Optical gas imaging (OGI) camera
- Part of the FLIR G-Series
- IR resolution of 320 x 240
Bacharach Insight Plus Combustion Analyzer
- Industry-exclusive Tune Rite on-demand HVAC “assistant”
- Measures O2, CO (w/NOx filter), stack/air temperature and draft/pressure
- Exclusive B-Smart pre-calibrated CO sensor for easy field replacement
Arizona Instrument Jerome J431-X Mercury Vapor Analyzer
- Automatic sensor regeneration when equipped with the communications option and used with the Jerome® Communication Software (JCS) program and the Jerome® Data Logger
- Regulated film heat voltage during sensor regeneration
- Survey mode can be locked in
AMETEK Land Lancom 4 Portable Gas Analyzer
- Monitoring of up 17 measurement parameters
- Up to 9 gas measurements in a single instrument
- High quality color display
RAE Systems MiniRAE 3000+ Portable Handheld VOC Monitor with Photoionization Detector
- Most advanced handheld VOC monitor on the market
- PID measures from 0-15,000 ppm
- 3-second response
mPower Electronics mPlatoon Multi-Gas Team Warning System
- Remote, wireless real-time readings and alarms including Man-down
- Up to 8 remote 4- or 5-gas monitors
- Up to 0.8 km (0.5 miles) distance to Squad Head
FLIR MUVE C360 Multi-Gas Detector
- 8-channel sensor delivers broad hazard coverage
- Analyze air quality surrounding active scenes before entry
- Select proper PPE before entering the scene
Bacharach PCA 400 Combustion & Emissions Analyzer
- Large touch screen display
- Bluetooth wireless communications
- Long-life O2 sensor
Horiba PG-250 Portable Gas Analyzer
- MCERTS Approved
- Single analyzer capable of measuring five components
- Compact and lightweight
Horiba PG-300 Portable Gas Analyzer
- Cross-flow modulation type detector
- Capable of measuring methane (CH4)
- Less warm-up time
Horiba PG-350 Portable Gas Analyzer
- Cross-flow modulation advanced efficiency of NDIR analysis
- Capable of measuring methane (CH4) for expanded options
- Ethernet communication facilitates data management
Horiba PS-300 Electronic Cooler Unit
- Electronic cooler unit
- Designed for the Horiba PG-300 Portable Analyzer Series
- Can accommodate low-temperature SO2 measurements
TSI Q-TRAK 7585 Indoor Air Quality Monitor
- Simultaneously measures and logs up to 20 IAQ parameters, including mass concentration and gas (in one instrument)
- Measures PM1, PM2.5, PM10 size fractions and total particle concentration
- Accommodates up to 6 optional, pre-calibrated gas sensors
Teledyne API 651 Ultrafine Particle Monitor
- Real time, continuous ultrafine particle monitoring
- Water-based condensation with laser detection
- Standard 19" rack mountable chassis
Arizona Instrument Jerome J405 Gold Film Mercury Vapor Analyzer
- Meets EPA & ATSDR Action Levels
- Battery Powered Sensor Regeneration
- 24 Hour Battery Life
SMC SF6 6100 Portable Gas Analyzer
- Modular design allows for bespoke sensor combination upon request
- Housed within a heavy-duty, transportable IP66 case
- Total weight of 46 lb (21kg)
Teledyne API T640 PM Mass Monitor
- Continuous, real-time PM10 and PM2.5 mass concentration results
- Simple set-up and 10-minute warm up time
- Superior measurement sensitivity and precision
RAE Systems UltraRAE PGM 7200 Benzene Monitor
- Lightweight and compact
- Dependable and accurate
- Programmable alarm thresholds
Fluke Biomedical VT Plus HF Gas Flow Ventilator Analyzer
- Bi-directional flow, pressure, volume, and oxygen concentration, and pressure measurements
- Low- and high-pressure, and flow measurement capability
- Special HF mode—up to 900 BPM (15 Hz)
Fluke Biomedical VT900A Gas Flow Analyzer
- Streamline your testing procedure, reduce errors and shorten your test time with the ability to create customized test profiles.
- Avoid confusion and ensure accuracy with one-channel, full-range air flow functionality.
- Reduce testing time with built-in line sensors which automatically test humidity, temperature and oxygen while compensating for atmospheric pressure and environmental conditions.