Pacific Power M6204 IEC Flicker Impedance Unit

The Pacific Power M6204 IEC Flicker Impedance Unit provides the requisite lumped impedance between the AC Power Source and the Unit Under Test (UUT) used to test for flicker compliance to IEC 61000- 3-3. Designed to meet IEC 60725 - Consideration of reference impedances and public supply network impedances for use in determining the disturbance characteristics of electrical equipment having a rated current ≤75 A per phase – the M6204 simulates the typical public utility impedance characteristics found in most European countries in order to provide a common flicker measurement reference. Compatible with 360AMXT and 3120AMXT AC Source Models.

Product Info

Resistive:	Phase A: 0.24 Ω
	Phase B: 0.24 Ω
	Phase C: 0.24 Ω
	Neutral: 0.16 Ω
	Accuracy: ± 0.002 Ω
Inductive:	Phase A: 0.15j
	Phase B: 0.15j
	Phase C: 0.15j
	Neutral: 0.10j
	Accuracy: < 2%
Voltage:	300 Vrms
Current:	16 Arms
Power:	4000 VA/W

Three phase flicker impedance network
Z-ref impedance values per IEC 60725
Compatible with 360AMXT and 3120AMXT AC source models
High qualify impedance components used
Dual connectors on rear panel
standard 19" rack mount enclosure

EM Test 3-Phase Netwave Series AC/DC Power Supply

Wide Power Bandwidth; DC - 5kHz
Output Power up to 60,000VA AC / 72,000W DC
Output Voltage up to 3*360V AC (p-n), +/-500V DC

EM Test DPA 503N Power Analyzer per IEC 61000-3-3, IEC 61000-3-11 and IEC 60725

Real-time data acquisition
Internal hard disk for data storage
16-Bit A/D converter

EM Test DPA 500N Single Phase Power Analyzer with Harmonics & Flicker

Real-time data acquisition
Internal hard disk for data storage
16-Bit A/D converter

EM Test Netwave Series, Single Phase AC/DC Power Source

Wide Power Bandwidth; DC - 5kHz
Output Power up to 7,500VA AC and 9,000W DC
Output Voltage max. 360V AC and +/- 500V DC

Newtons4th IMP16 IEC Reference Impedance Network

Newtons4th PPA5531 Flicker and Harmonics Analyzer

Fully Compliant Harmonics and Flicker Test Solutions
Leading wideband accuracy Basic 0.01% with class leading high frequency performance
ISO17025 accredited ISO17025 IEC61000 certification available

Teseq Profline 2105 | 1 ph, 5 KVA

5 kVA output power
Immunity test system that is simple to upgrade, pc-based
Accessible control interface

Pacific Power 320ASX Single / Three Phase AC Power Supply | 2000 VA

22 Waveform Library – Arbitrary Waveform Generator
15 to 1,200 Hz Operation – 5,000 Hz Bandwidth
Precision Voltage Programming – 0.05% with CSC engaged

California Instruments MX45 AC Power Source | 45 kVA, 3P

Three Phase Mode Phase mode programming on MX30-3Pi and MX45-3Pi allows for a three-phase output
Phase mode programming on MX30-3Pi and MX45-3Pi allows for a three-phase output
High Power AC and DC Power Source Programmable AC and DC power for frequency conversion and product test applications

California Instruments CSW5550 Programmable AC/DC Power Source, 5550VA

Combination AC and DC Power Source
40-5,000Hz Output Frequencies
Arbitrary and Harmonic Waveform Generation

Teseq NSG 1007 AC & DC Power Sources

Combination AC and DC power source and power analyzer
Arbitrary waveform generation
Built-in digital power analyzer

EM Test Harmonics & Flicker Test System for IEC/EN 61000-3-2/3-3

Real-time data acquisition
Internal hard disk for data storage
16-Bit A/D converter

Teseq Profline 2103 3 kVA Harmonics & Flicker Measuring System

Low cost system for small DUTs
Complete test system including clean power source
Simulated flicker impedance, no need for expensive physical impedance

Kikusui KHA1000 16A/1PH Harmonics/Flicker Analyzer for IEC 61000-3-2 & 3-3

No need for a PC for compliance testing
Customization of test conditions
Easy-to-view screen and real-time measurement

Pacific Power ECTS2-3500Z 50 kVA Power Source

AC only or AC and DC Test Systems
Single Phase and Three phase Output Modes
Regenerative Systems Available

Advanced Analyzers HFA-3-36-REF Harmonics and Flicker Analyzer | 3 ph, 36 A

Up to Harmonic 40
Can be optionally selected to show 2 - 9 kHz
0 - 350 V-rms ±500 Volt peak std

Yokogawa WT3000 Precision Power Analyzer

Basic accuracy: 0.01% of reading
Basic power accuracy: 0.02% of reading
30A current input element

California Instruments MX Compliance Test System Series

Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high speed data transfers, unlike competing
PC based Harmonic and Flicker test software provides real-time full color data display updates and continuous PASS/FAIL monitoring.
Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.

CNS Poway HFA-16/75 1 Phase Harmonics & Flicker Analyzer

ISO-17025 accredited device
16 bit USB based data acquisition
PLL based sampling method

California Instruments 5001iX AC Power Source

Combination AC and DC Power Source and Power Analyzer
3000 VA - 15000 VA of Output Power
Arbitrary Waveform Generation

EM Test ACS 500N2.3 Single Phase AC/DC Voltage Source, 2 kVA

Voltage range: 0V to 330V AC/DC
Voltage resolution: 0.025% (12 bit)
Output frequency: DC, 10Hz to 80Hz

California Instruments 2300CL Harmonics and Flicker Calibrator

2300W
100-240VAC
178 mm (7 inch) high-rack chassis

Yokogawa WT5000 Precision Power Analyzer

Unmatched basic power accuracy of ±0.03%
10 MS/s, 1MHz power bandwidth, 18 bit resolution enabled by Yokogawa isoPRO™ fiber optic isolation technology
Precision current measurement guaranteed by innovative symmetric coaxial shunt design

Newtons4th IMP753 Impedance Network

Teseq 2145 45kVA 3-Phase Flicker and Harmonics Measuring System

AC fast switching unit for standards specified in the IEC 61000-4-11
Unit has two inputs, AC source and AC Mains
Allows for single or three phase mode testing