.png "Yokogawa WT300E Series Digital Power Analzyers")
Yokogawa WT300E Digital Power Analyzer Series
- Basic Accuracy: ±0.15% (at 50/60 Hz)
- DC Measurement: 0.1 Hz - 100 kHz
- 100 ms data update rate
Yokogawa WT333E Digital Power Analyzer
- 5mA to 20A
- DC, 0.1 Hz to 100 kHz
- 3-Phase
Montena POG-CS116-9 Transient Generator 10 kHz - 100 MHz
GSSI Flex NX25 Concrete GPR System
- Depth range up to 75cm (30in)
- Dual cross-polarized antenna
- Operating Temp: -20°C ... +50°C
Teseq CDN 3425 Burst/EFT Coupling Clamp
- With Safety Cover or Interlock
- New design
- Complies with IEC 61000-4-4 Ed 2.0 2004
GAUSS INSTRUMENTS TDEMI X40 | 9 kHz – 40 GHz
- Frequency range from DC up to 40 GHz
- 645 MHz real-time analysis bandwidth
- Dynamic range of more than 100 dB
Teseq CDN 3083-S100 CDN | 3 Ph, 100 A, 690 V
- 100 Amps per phase with generous overload capacity
- For EUT power supplies up to 620 Volts
- Complies with IEC/EN 61000-4-5 and ANSI C62.45
Chroma 61601 Programmable AC Power Source 500 VA, 15 Hz - 1 kHz
- Low output impedance for testing IEC 61000-3-2
- Compact size and weight attributable to advance PWM technology
- Built-in PFC, provide input power factor over 0.98 (full load)
Fluke DSX-8000 Cable Analyzer
- Class 6A & 8 cable certification
- Unmatched certification speed
- ProjX management system
Gigatronics 80303A Standard Power Sensor
SKF Static Motor Analyzer Baker DX6
- 4 to 40 kV voltage testing capability to test fractional HP motors to 40 megawatt generators
- High and low voltage testing capability in one unit to test the motor circuit and all the insulation
- Intuitive graphical user interface with touch screen
Electro-Tech 204 Charged Plate Analyzer
- Use as a static meter, CPM & electrostatic analyzer
- Chopper-stabilized sensor
- Operates in ionized air
PMM L3-100
- Current: 100A
- Frequency: 9kHz – 30MHz
- Max. Voltage (L/N): 565 VDC
Noiseken ESS-2000 Electrostatic Discharge Simulator
- A light weight discharge gun
- Meets and far exceeds the requirements in EN/IEC61000-4-2
- Up to 30kV output in both contact and air discharges
Yokogawa WT1806 Power Analyzer
- DC Power Accuracy ±0.05%
- Voltage/Current Frequency Range: 5 MHz
- Voltage Range of 1.5 V to 1000 V
Keysight 11947A Transient Limiter | 9 kHz – 200 MHz
- Protects the spectrum analyzer input from damage caused by high-level transients
- Frequency range of 9 kHz to 200 MHz
- Insertion loss of 10 dB
Haefely PLINE 1610 Voltage / Interruption Tester for IEC 61000-4-11
- Totally reproducible test results
- Fully automated, time saving design
- Integration in a full EMC test system
Tenney T-Shock Junior Thermal Shock Chamber
- Vapor-tight interior liners made of 100% continuously welded stainless steel
- Control system provides fully automatic, PID, chamber control through a user-friendly alpha-numeric display
- Available in horizontal or vertical configurations
Anritsu PIM Master MW82119B-0260 Passive Intermodulation Analyzer, LTE 2600 MHz
- Passive Intermodulation (PIM) Analyzer with the following measurement types: PIM vs. Time Swept PIM Distance-to-PIM (DTP) Noise Floor
- PIM vs. Time
- Swept PIM
Com-Power ACS-181 Power Amplifier 150 kHz - 80 MHz, 100 W
Teseq Profline 2103 3 kVA Harmonics & Flicker Measuring System
- Low cost system for small DUTs
- Complete test system including clean power source
- Simulated flicker impedance, no need for expensive physical impedance
Noiseken ESS-B3011 & GT-30R ESD Simulator
- "Pre-checking function" taking the confirmable test into the account
- "CR constant checking function" (No indicator) to make the correct unit attachment sure"
- Discharge Detecting Function" to realize the air-discharge confirmation
Haefely ONYX 16
- Voltage: 16kV
- Contact Discharge: 1000V - 16,000V
- Air Discharge: 1000V - 16,000V
FLIR T640 Thermal Imaging Camera
- 5 MP visible light camera with lamp
- 4.3” Bright Touch-screen LCD
- 8× Digital Zoom
Haefely AXOS8 Compact Conducted Immunity Test System
- 0.2 – 5.0 kV ±10% at coaxial output
- 50 Ohms
- 5 ns ±30%