Temptronic ECO-660 ThermoStream Temperature Forcing System
- Economy model with high thermal capacity
- Precise temperatures with fast transitions from -60 to 200°C
- No annual leak testing required per EU 517/2014 F-Gas Regulation
Temptronic SA177750 Hood Style THERMOCHAMBER
- Portable
- No LN2 or LCO2 required
- Frost-free low temperature testing
Thermonics T-2500SE Temperature Forcing Systems
- Fast temperature response time
- Temperature range of -90°C to +225°C
- Environmentally safe
Temptronic ATS-615 Thermostream Low Temperature Mobile Test System, -45 to +225°C
- Dry air purge for tester interface, prevents condensation: 0.5 to 3scfm (0.25 to 1.5 l/s)
- Heat only mode reduces power when cold temperatures are not used
- Fully adjustable thermal head
Temptronic TPO4100A ThermoStream Thermal Inducing System
- Airflow Rate: 2 to 6 scfm ( 1 to 3 l/s)
- Create up to 10 ramp/soak/cycle thermal test routines
- Intuitive, user-friendly menu control
inTEST ATS-505 Thermostream Advanced Temperature Source
- Temperature Range: -20° to +225°C
- No LN2 or LCO2 required
- 50/60 Hz operation
inTEST ATS-730 Thermostream High-Speed Thermal Test System
- Temperature Range: -85°C to +225°C (50Hz)
- Temperature Range: -90°C to +225°C (60Hz)
- No LN2 or LCO2 required
inTEST ThermoStream ECO-810-M Temperature Forcing System
- No annual leak testing required
- 20 A / 60 Hz circuit
- Windows OS
inTEST ATS-645 Thermostream Temperature Forcing System
- Temperature Range: -80°C to +225°C
- No LN2 or LCO2 required
- 60 Hz operation
inTEST ATS Thermostream Advanced Temperature Source Series
- Frost Free Feature: Dry air purge for tester interface Prevents condensation: 0.5 to 3scfm (0.25 to 1.5 I/s)
- Dry air purge for tester interface
- Prevents condensation: 0.5 to 3scfm (0.25 to 1.5 I/s)
Temptronic TPO4300A ThermoStream Temperature Source System
- Airflow: High capacity 9 l/s (18 scfm) continuous airflow optimizes temperature transition rate and throughput.
- Typical Temperature transition rate: -55˚ to +125˚C: approximately 7 seconds +125˚ to -55˚C: approximately 20 seconds
- -55˚ to +125˚C: approximately 7 seconds
MPI Thermal ThermalAir TA-1000A Temperature Forcing System
- Filtered to 5μ particulate contamination
- Oil Content: < 0.10 ppm by weight and filtered to 0.01μ oil contaminants
- Eco-friendly with up to 50% power energy savings
inTEST ATS-870 Thermostream Advanced Temperature Source
- Temperature Range: -100°C to +225°C
- No LN2 or LCO2 required
- 60 Hz operation
inTEST ATS-635 Thermostream Thermal Inducing System
- Frost Free Feature: Dry air purge for tester interface Prevents condensation: 0.5 to 3scfm (0.25 to 1.5 I/s)
- Dry air purge for tester interface
- Prevents condensation: 0.5 to 3scfm (0.25 to 1.5 I/s)
MPI Thermal ThermalAir TA-5000A Temperature Forcing System
- ECO Smart DC System - unique DC variable-controlled temp. compressor
- Low audible noise of < 49 dBA average
- Energy savings up to 50%
inTEST BT28 ThermoStream
- Filtered to 5μ particulate contamination
- Oil Content: < 0.01 ppm by weight and filtered to 0.01μ oil contaminants
- Wide temperature range and high airflow rate
inTEST ATS-515 Thermostream Temperature Test System
- Temperature Range: -45°C to +225°C
- 50/60 Hz operation
- No LN2 or LCO2 required
Temptronic TPO4310A Thermal Inducing System
- User Control from the front panel function keys and intuitive menus or via remote interface ( IEEE-488, RS232, ST/EOT)
- Two modes of operation: Operator Mode: Test and cycle at Hot/Ambient/Cold temperatures Cycling Mode: Utilize up to 12 thermal cycling sequences, "Smart Tuning" and other advanced
- Operator Mode: Test and cycle at Hot/Ambient/Cold temperatures
MPI Thermal ThermalAir TA-3000A High Capacity Thermal Air Stream System
inTEST ATS-605 Thermostream Advanced Temperature Forcing System
- Program & datalog storage
- User-defined temperature limits
- LabView drivers