PCB Piezotronics 350D02 Shock Accelerometer
- Fixed voltage sensitivity
- Low-impedance output signal
- Two-wire operation
Bruel & Kjaer 2706 Power Amplifier 10 Hz - 20 kHz, 75 VA
- 75 VA power output capability
- Switchable 5 A or 1.8 A max. current limiting
- 40 dB voltage gain
Endevco 2721B Charge Amplifier
- Small unit for laboratory and field use
- Front panel selectable filter
- Dial-in sensitivity for set output in mVg
PCB Piezotronics 086C01 Impulse Hammer
- Compatible with standard ICP® Signal Conditioners
- A variety of hammer tips provided so excitation content can be tailored to object under test
- Extender mass included with all models
PCB Piezotronics 333B52 Accelerometer, ICP
- Modal array, ceramic shear ICP® accel
- Adhesive mount
- Sensitivity of (±10%)1000 mV/g (102 mV/(m/s²))
Bruel & Kjaer 8210 Impact Hammer
- Robust construction
- 1-, 3- and 12-pound versions for a variety of structures
- DeltaTron (low-impedance) output
Endevco 2272 Piezoelectric Accelerometer
Endevco 2792B ISOTRON Signal Conditioner, 1 Hz - 30 kHz
- 9-Channel constant current supply/amplifier for ISOTRON (mv/g) Accelerometers or Remote Charge Convertors
- Transducer sensitivity normalization and LED status indicators
- Wide frequency range: 1 Hz to 30 kHz
PCB Piezotronics 086D50 Impact Hammer
Endevco 2735 Charge Amplifier
- Grounded Mode
- Isolated Mode (floating)
- Output Connections: All outputs are single-ended with one side connected to circuit ground
Endevco 2221F Piezoelectric Accelerometer, 45 kHz
- Requires No External Power
- Annular Shear
- Small Size
Endevco 2792a Signal Conditioner
- 90 - 110 V rms
- 105 - 125 V rms
- 210 - 250 V rms
Endevco 2228C Piezoelectric Accelerometer, 21 kHz
- Triaxial
- Ground Isolated
- Light Weight (15 gm)
PCB Piezotronics 607A11 Accelerometer
- 360º Swivel Mount
- Small Size (9/16 inch hex. Footprint, Low Profile)
- Lower Cost Alternative to Through Bolt Sensors
PCB Piezotronics 352A73 Accelerometer
- Miniature, lightweight (0.3 gm)
- Ceramic shear ICP® accel
- 5 mV/g, 2 to 10k Hz, titanium housing
Endevco 25B Piezoelectric Accelerometer ISOMIN
- RANGE: ±1000 g
- VOLTAGE SENSITIVITY: Typical 5 mV/g Minimum 4 mV/g
- RESONANCE FREQUENCY:50 kHz
Endevco 133 Three-Channel PE/Isotron Signal Conditioner
- Three-channel PE/IEPE signal conditioner
- 200 kHz bandwidth (-3 dB Corner)
- Built-in 4-pole Butterworth high-pass filter with optional corner frequencies
Endevco 2680M4-103 Accelerometer/Airborne Charge Amplifier
- Gain Range: 0.1 to 10.0
- Input Pulse: 5,000 pC
- Residual Noise: 1.5 mV rms
Bruel & Kjaer 4384 Piezoelectric Charge Accelerometer
- General purpose testing and analysis
- High sensitivity
- Vibration testing and analysis
PCB Piezotronics 356A45 Triaxial Accelerometer
- Wide frequency bandwidth
- High resonant frequency
- Hermetically sealed titanium housing