Skip to Content
800-404-2832

No results found

Keysight

Keysight 84115EM Pre-Compliance EMC EMI Test System

The Keysight 84115EM Pre-Compliance EMC EMI Test System (previously Agilent Technologies) makes ordering your EMC precompliance system easy. The 84115EM provides the tools and accessories you need to perform radiated and conducted emissions measurements to test your product to the major commercial regulatory agency requirements. In addition, the system provides the troubleshooting tools you need to locate emission hot spots. The 84115EM can also accommodate standards such as EN 61000-6.

Product Info Related Compliance Standards
Test System 84115EM
E7400A Series EMC analyzer At least three of the following options:
11945A, 11955A, 11956A, 11966P, 11966E, 11966J, E7415A, 11967D
Options Select and configure the E7400A series EMC analyzer of your choice.
E7402A, 30 Hz to 3.0 GHz (default selection)
E7405A, 30 Hz to 26.5 GHz
  • Preprogrammed, automated measurement
  • Interactive software that allows you to perform test from your PC
  • Automatic remeasure functions for consistent repeatable results
  • Includes necessary cables for basic testing


SKU: AGIL-84115EM

Related Compliance Standards

Explore All Standards
IEC 61000-6-5: Immunity for Power Station and Substation Environments
IEC 61000-6-5 sets immunity requirements for apparatus intended for use by Electricity Utilities in the generation, transmission and distribution of electricity and related telecommunication systems. The locations covered are the power stations and the substations where apparatus of Electricity Utilities are installed. Being part of Part 6 of the IEC 61000 series of standards, this covers generic immunity standards. IEC 61000-6-5 Immunity requirements are given for the frequency range 0 Hz to 400 GHz, but only in respect of electromagnetic phenomena for which detailed test procedures, test instrumentation and test set-up are given in existing IEC basic standards. The immunity requirements are suitable for satisfying the particular needs related to the functions and tasks of equipment and systems, for which reliable operation is required under actual electromagnetic conditions; in this respect, this technical specification establishes performance criteria for the different functional requirements. IEC 61000-6-5 has the task to specifiy a set of essential requirements, test procedures, and generalized performance criteria applicable to such products of systems operating in this electromagnetic environment.
EN 61000-6: Electromagnetic compatibility (EMC) - Part 6: Generic Standards
EN 61000-6 is an electromagnetic compatibility (EMC) standard developed to keep interference between electronic devices under control to reduce disturbance and improve immunity in residential, industrial, and commercial environments. EN 61000-6 has four parts to date comprised of the following: 1) EN 61000-6-1: Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments Applies to electrical and electronic apparatus intended for use in residential, commercial and light-industrial environments both indoor and outdoor. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered. This generic EMC immunity standard is applicable if no relevant dedicated product or product-family EMC immunity standard exists. This standard applies to apparatus intended to be directly connected to a low-voltage public mains network or connected to a dedicated DC source which is intended to interface between the apparatus and the low-voltage public mains network. This standard applies also to apparatus which is battery operated or is powered by a non-public, but non-industrial, low-voltage power distribution system if this apparatus is intended to be used in the locations. This standard supersedes EN 50082-1. 2) EN 61000-6-2: Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments Applies to electrical and electronic apparatus intended for use in industrial environments. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered. This generic EMC immunity standard is applicable if no relevant dedicated product or product-family EMC immunity standard exists. This standard applies to apparatus intended to be connected to a power network supplied from a high or medium voltage transformer dedicated to the supply of an installation feeding manufacturing or similar plant, and intended to operate in or in proximity to