Skip to Content
800-404-2832

No results found

EM TEST

EM Test UCS 500N5E EFT/Burst Generator, 5.5kV

Discontinued
The EM Test UCS 500N5E EFT/Burst Generator, is a new dedicated EFT/Burst generator based on the successful UCS 500N series of ultra-compact simulators. Offering all the benefits of the well-known UCS 500N5 it is designed as a Burst generator only. This makes it the full performing Burst tester as per IEC/EN 61000-4-4 with the best benefit-to-cost ratio yet upgradeable to include other test abilities such as Combination Wave Surge and PowerFail.

Apart from its built-in single phase test capability it is extendable for testing three-phase DUTs by means of automatically controlled external coupling networks up to 100A. EM TEST supplies a large range of accessories for various applications.
 
Options:
  • CNI 503Ax: 3-phase coupling/decoupling networks as per IEC 61000-4-4 and -4-5 up to 100A per phase
  • CNE 503x: Coupling/decoupling networks for special EFT/Burst test applications, e.g. for energy meters, as per IEC 60255

 Product Info Available Add-Ons Related Compliance Standards
  • Test voltage:
    • 200V - 5,500V ± 10%;
    • 100V - 2,750V ± 10% into 50ohm
  • Pulse shape: 5/50ns into 50ohm and 1,000ohm
  • Rise time tr:
    • 5ns ± 30% into 50ohm;
    • 5ns ± 30% into 1,000ohm
  • Pulse width td:
    • 50ns ± 30% into 50ohm;
    • 50ns -15/+100ns into 1,000ohm
  • Source impedance: 50ohm
  • Polarity: Positive/negative
  • Trigger Circuit
    • Trigger of bursts: Automatic, manual, external
    • Synchronization: 0° - 360°, resolution 1° (16 - 500Hz)
    • Burst duration: td = 0.10ms - 999ms
    • Repetition rate: tr = 10ms - 9,999ms
    • Spike frequency: f = 0.1kHz - 1,000kHz
    • Test duration:
      • T = 0:01min - 99:59min
      • T > 99:59min --> endless
  • Output
    • Direct: Via 50ohm coaxial connector
    • Coupling mode: L, N, PE; all combinations
    • DUT supply:
      • AC: 300V/16A; 50/60Hz
      • DC: 300V/16A
    • CRO trigger: 5V trigger signal for oscilloscope
  • Fully compliant to IEC 61000-4-4 Am1 Ed.2
  • Test voltage up to 5.5kV
  • Up to 10,000 pulses per second
  • Up to 1,000 pulses per burst
  • Built-in single phase coupler 300V/16A
  • Manual operation from front panel
  • USB and GPIB-Bus for remote control


SKU: EMTE-UCS-500N5E

Available Add-Ons
EMTE-IEC.CONTROL1 Em Test Software: IEC.CONTROL
EMTest_HFK EM Test Type HFK Capacitive Coupling Clamp

Related Compliance Standards

Explore All Standards
IEC 60255: Electrical Relays
IEC 60255 specifies common requirements and rules applicable to measuring relays and protection equipment. This includes any combination of devices to form schemes for power system protection such as control, monitoring and process interface equipment in order to obtain uniformity of requirements and tests. The IEC 60255 specifies measuring relays and protection equipment used for protection within the power system environment covered by this standard. Other standards in this series may define their own requirements which in such cases shall take precedence. For special applications (marine, aerospace, explosive atmospheres, computers, etc.), the general requirements within this standard may need to be enhanced by additional special requirements. The requirements are applicable only to relays in new condition. All tests in this standard are considered type tests, unless otherwise declared. The object of IEC 60255 is to specify limits and test methods, for measuring relays and protection equipment, taking into account cominbations of devices to form schemes for power system protection including the control, monitoring, communication, and process interface equipment within those systems. This standard specifies the requirements for electromagnetic compatibility for measuring relays and protection equiment. The requirements are applicable to measuring relays and protection equipment in a new condition and all tests specified are type tests only. This IRC 60255 standard is retrieved from IEC 10-31-2013.