Dewetron HSI-STG-D High-Speed Isolation AmplifierHigh-Speed Isolation Amplifier Rentals

Dewetron HSI-STG-D High-Speed Isolation Amplifier

The Dewetron HSI-STG-D High-Speed Isolation Amplifier is a reliable, high-performance signal conditioner. The HSI-STG-D is a single channel strain gauge amplifier that offers an analog ±5 V output, working with many Dewetron instruments but also many other common tools for signal conditioning. With a bandwidth that can reach 2 MHz, this amplifier excels with an isolation of 350 VDC and resistance that ranges from 25 mΩ to 100 kΩ.

Module Specifications
Strain Gauge, Bridge Sensors	±0.1 to ±1000 mV/V (@ 5 VDC excitation)
Piezoresistive Bridge	±0.5 to ±10000 mV/mA (@ 1 mA excitation)
Voltage Input	±500 μV to ±10 V
Resistance	25 mΩ to 100 kΩ
Isolation	350 VDC
Gain	0.5 to 10 000; free programmable
Input Impedance	>100 MΩ (power off: 50 kΩ)

Module Specifications

Strain Gauge, Bridge Sensors

±0.1 to ±1000 mV/V (@ 5 VDC excitation)

Piezoresistive Bridge

±0.5 to ±10000 mV/mA (@ 1 mA excitation)

Voltage Input

±500 μV to ±10 V

Resistance

25 mΩ to 100 kΩ

Isolation

350 VDC

Gain

0.5 to 10 000; free programmable

Input Impedance

>100 MΩ (power off: 50 kΩ)

Vishay 2210 Signal Conditioning Amplifier System

Isolated constant-voltage/constant-current excitation
Guarded input structure with + 350V common-mode capability, +10V and tape outputs
Automatic wide-range bridge balance

Bruel & Kjaer 2692D NEXUS Conditioning Amplifiers for High Input

Vishay P3 Strain Indicator & Recorder

Four input channels
Direct reading LCD display
On-board data storage

Vishay 2311 Signal Conditioning Amplifier

Easy-to-use device with an LED display
Wide frequency response and versatile excitation
A current of 0 to 100 mA (limited at 175 mA, maximum)

Endevco 133 Three-Channel PE/Isotron Signal Conditioner

Three-channel PE/IEPE signal conditioner
200 kHz bandwidth (-3 dB Corner)
Built-in 4-pole Butterworth high-pass filter with optional corner frequencies

Vishay 2310 Signal Conditioning Amplifier System

Accepts all strain gauge inputs (foil and piezoresistive), potentiometers, DCDT’s, etc.
Selectable bridge excitation, 0.7 to 15 VDC (11 steps), plus 0.2 to 7 VDC continuously variable
Fully adjustable calibrated gain from 1 to 11,000