Com-Power CGC-255 Comb Generator, .05 MHz

Com-Power CGC-255 Comb Generator, .05 MHz - 30 MHz

The same principle that is used for verifying radiated emissions test site, can be employed to test the conducted emissions setup in an EMC test laboratory with a CGC series Comb Generator. This Comb Generator was specifically designed to test conducted emissions setups that utilizes Line Impedance Stabilization Networks (LISNs). The CGC series Comb Generator output is available on the standard three prong connector that can plug into any LISN that uses standard US 115 VAC socket to power the equipment under test. By using the Comb Generator the test engineer can quickly identify any problems with the conducted setup before making any final measurements.

Com-Power CGO-505 Comb Generator, 5 MHz - 1 GHz

Frequency range of 5 MHz to 1 GHz
Stable frequency output
Automatic low voltage signal shutoff

Com-Power CGO-501 Comb Generator, 1MHz - 1GHz

Com-Power CGO-515 Comb Generator, 1MHz - 1.5GHz

Com-Power CGC-255E Comb Generator, 50kHz - 400MHz

Reference Signal Source for LISNs
Frequency Steps of 50 kHz and 250 kHz
Usable Frequency Range up to 400 MHz

EMCO 4630 Reference Radiator | 10 kHz to 1 GHz

Frequency Range: 10 kHz to 1 GHz
Comb Generator Ranges: 0.01-1 MHz (Line Spacing: 0.1 MHz, Power Output: -17 to -20 dBm); 1-100 MHz (Line Spacing: 1 MHz, Power Output: -10 to -18 dBm); 100-1000 MHz (Line Spacing: 5 MHz, Power
Includes: Comb Generator, Remote Control Unit, 10 m Fiber Optic Cable, Power Supply 9 VDC, Square Loop Antenna Assembly, Short Dipole Antenna Elements Balun Assembly, Long Dipole Antenna Elements

Frequency Range	0.05 - 30 MHz
Step size	0.05 or 0.25 MHz
Mode	Conducted