Chroma 63803 AC/DC Electronic Load
- 1800W
- 50V ~ 350Vrms
- 45 ~ 440Hz
Pacific Power 3210AGX | AC & DC Load/Power Supply | 21 kVA
- 3-in-1 grid simulator, power source, and load
- 4 quadrants
- Fully regenerative
Adaptive Power Systems 4 Series Programmable Modular DC Electronic Loads
- Max. Power 300W per Module
- Wide Voltage Range, 0 - 500 Vdc
- Max. Current Range 60 Adc
NH Research 4700 Series DC Loads
- 120V, 1kW/200A to 36kW/7200A
- 18 Voltage, Current, Power and Timing Measurements
Kikusui PLZ 5 kW DC Electronic Load System
- Wattage: 0 to 1000 W
- Current: 0 to 200A
- Voltage: 1.5 to 150 Vdc
Chroma 63206 DC Electronic Load 80 V, 600 A, 10.4 kW
- CC, CR, CV, CP load modes
- Master/Slave paralleling control mode, allow synchronous load control under static and dynamic loading mode (Up to 93.6kW)
- Dynamic loading : Up to 20kHz
Pacific Power 3210RLS-4W AC/DC Load Simulator | 21 kVA
- Four Quadrant Operation with energy recovery back to the grid
- Standard Models in Power Levels from 6kVA to 21kVA. Parallel units up to 168kVA/kW per cabinet. Dual cabinets up to 252kVA/kW.
- Ultimate Flexibility with 6 configurations: 1, 2 or 3 Phase, dual or triple independent outputs/inputs, single + split outputs/inputs.
Megger Torkel 820 12, 24, 48 Volt DC Battery Load Unit
- External measurement input used to measure current in an external path by means of a clamp-on ammeter or a current shunt.
- Alarm output equipped with a relay contact for triggering an external alarm device.
- Start/Stop input used for starting and stopping discharging from an external device. Galvanically isolated.
Chroma 63210 DC Electronic Load 500 V, 150 A, 14.5 kW
- CC, CR, CV, CP load modes
- Master/Slave paralleling control mode, allow synchronous load control under static and dynamic loading mode (Up to 93.6kW)
- Dynamic loading : Up to 20kHz
Chroma 63105A DC Electronic Load Module 500 V, 10 A, 300 W
- Up to eight channels in one mainframe, for testing multiple output SMPS
- Parallel load modules up to 1200W for high current and power applications
- Synchronization with multiple loads
Chroma 63207 DC Electronic Load 80 V, 30 A, 1040 W
Chroma 62180D-100 Bidirectional DC Power Supply | 100 V, 18 kW
- Voltage rating of 20 to 100 V
- Current rating of 0 to 540 A
- Power rating of 18 kW
Chroma 63203 DC Electronic Load 1 to 80 V, 600 A, 5200 W
- Voltage range: 1-80V
- Power Rating: 5200W
- Current range: Up to 600A
Chroma 63630-80-60 DC Electronic Load 80 V, 60 A, 300 W
- Up to 10 channels in one mainframe,fit for testing multiple output SMPS
- 0.4V @ 80A (Typical) low voltage operating characteristics
- Flexible CC, CR, CV and CP operation modes
NH Research 4760 High Voltage Electronic DC Load | 600 V, 300 A
- 600 Volts, 300 Amps - Paralleling capability up to 1800 Amps or 36 kW
- 18 Voltage, Current, Power and Timing Measurements
- Complex load profile playback
NH Research 9300 High-Voltage Battery Test System | 1200 V, 100 kW – 2.4 MW
- Wide-operating envelope of 100kW per cabinet High-voltage range up to 1200 V & 167 A High-current range up to 333 A & 600 V
- High-voltage range up to 1200 V & 167 A
- High-current range up to 333 A & 600 V
Chroma 63600 Series Modular DC Electronic Load
- Max. Power : 100W x 2(Dual), 300W, 400W
- Voltage Range : up to 80V
- 5 module mainframe Max. 2000W, load modules up to 400W/ea
Megger Torkel 950 Battery Load Unit
- Display range: 0.0 to 2999.0 A
- Basic inaccuracy: ±(0.5% of reading +0.1 A)
- Resolution: 0.1 A
Chroma 63212E-150-1200 DC Load
- Rated power: 2kW, 3kW, 4kW, 5kW, 6kW, 8kW, 10kW, 12kW, 15kW, 18kW, 20kW, 24kW
- Voltage range: 150V, 600V, 1200V
- Current range: 2000A max.
Chroma 63200A High Power DC Electronic Loads
- Up to 20 units master/slave parallel control
- Dynamic synchronous control in static and dynamic loads
- User defined waveform (UDW)
Chroma 63103A DC Electronic Load Module 80 V, 60 A, 300 W
- Up to eight channels in one mainframe, for testing multiple output SMPS
- Parallel load modules up to 1200W for high current and power applications
- Synchronization with multiple loads
Kikusui PLZ1002W Electronic Load 1000W 3-110V 200A
- 1000 watt electronic load
- Voltage range 3-110V
- Current range 0-200A
Chroma 63206A-600-420 DC Load | 600 V, 420 A
- 600 V and 6 kW
- High precision and accuracy
- Up to 10 units master/slave parallel control
Megger Torkel 840 DC Battery Load Tester
- "In Service" batteries can be tested
- Load currents in the test parameters are included as the unit adjusts
- Adjustable alarm and shutdown points to prevent excessive discharge
Chroma C8000 LED Power Driver Test System
- Output voltage
- Output current
- Ripple Current (RMS & p-p)