California Instruments Asterion AST2253
- Output: 2250VA, 0-200/400V, 1ph/3ph
- Frequency Range: 16Hz - 1000Hz
- Input Power: 90/264VAC, 1ph/3ph
Pacific Power 3500 AZX Regenerative AC and DC Power Source | 50 kVA, 50 kW, 3P
- Full power source and sink capability
- Full 100% of current and power rating in both source and sink mode
- Parallel configurations for higher power
California Instruments RS90 AC DC Power Source | 90 kVA
- Output Power: 90kVA/0-300VAC/3ph
- Input Power: 480VAC/3ph
- Test Standards: MIL-STD-704, DO-160 S16, IEC 4-11, IEC 4-13
AMETEK i-BEAM Series
- Single system power up to 650 kW
- Parallel sytem power up to 1.3 MW
- Bidirectional output voltage up to 1000 V
Amrel HPS Series High Power Switching DC Power Supplies
- High Power Density: Up to 150 kW in 19" Rack-mount Cabinets with casters
- Fast Load Transient Response: Protection from undesired voltage excursions
- Fast Slew Rate: Industry-leading rise/fall times for speed-critical applications
Amrel SPS 10-400 DC Switching Power Supply 10 V, 400 A, 4 kW
- Two Modes in One: Automatic constant voltage and constant current mode crossover
- Protection Against Hazardous Faults: Remote Shutdown (S/D) and Interlock provide various external output shutdown capability – in case of hazardous faults
- Advanced External Analog Programming: Increased control and convenience in external programming applications achieved through various external voltage current and control methods
Amrel SPS40-250 Switching DC Power Supply
- Two Modes in One: Automatic constant voltage and constant current mode crossover
- Protection Against Hazardous Faults: Remote Shutdown (S/D) and Interlock provide various external output shutdown capability – in case of hazardous faults
- Advanced External Analog Programming: Increased control and convenience in external programming applications achieved through various external voltage current and control methods
Amrel SPS600 DC Switching Power Supply 600V, 2A
Amrel SPS 60-20 DC Switching Power Supply 60 V, 20 A
- Automatic mode crossover to constant current or constant voltage mode.
- Dual encoders, front panel on/off key, front panel indicators & simultaneous V/I Display for real-time control & monitoring, and to program & preview Iset, Vset, Over-current (OC), and
- Remote programming control with standardized SCPI commands, VLIST (voltage) and ILIST (current) stepping modes for advanced and integrated ATE Testing.
Anderson Electric Controls AC2250P DC Power Supply 250 kW
- Transition Time: < 110 µs Source to Sink.
- Step Response Time: < 10 ms for 10/90% or 90/10% step load at rated current.
- Voltage Sag: < 3.0% during step response.
Anderson Electric Controls AC2500P 500 kW DC Power Supply
- Two quadrant, regenerative to utility line (IEEE 519)
- Automatic transition from source to sink
- Liquid cooled package
Bitrode FTF-HP High Power Pack Testing System
- IGBT Design for efficiency and high performance operation
- Design for 100% duty cycle at max power
- Over-current, under-current, over-voltage and under-voltage protection standard on all models
California Instruments 15001IX AC / DC Power System
- Single Box AC Power System. Combines AC & DC power source, digital scope and power analyzer in one instrument
- DC Output Capability Use same instrument for DC output
- 3000 VA to 15000 VA AC Power Levels Match power source and cost to application requirements
California Instruments 3001iX AC Power Supply
- Combination AC and DC Power Source and Power Analyzer
- 3000 VA - 15000 VA of Output Power
- Arbitrary Waveform Generation
California Instruments MX45 AC Power Source | 45 kVA, 3P
- Three Phase Mode Phase mode programming on MX30-3Pi and MX45-3Pi allows for a three-phase output
- Phase mode programming on MX30-3Pi and MX45-3Pi allows for a three-phase output
- High Power AC and DC Power Source Programmable AC and DC power for frequency conversion and product test applications
California Instruments Sequoia Series | Regenerative AC Grid Simulator
- 480V overvoltage testing supported
- Non-Linear current waveform programming
- 500uS time resolution for Transients
California Instruments Tahoe | TA0045A1 Power Supply | 45 kVA
- Dual Voltage ranges that support over voltage testing on 480 V based systems
- Separate terminal blocks for single phase and 3 phase outputs
- High Power AC and DC Power Source
Chroma 62000D Bidirectional DC Power Supply Series
- Two quadrant operation: Power source and regenerative load
- High power density: 18 kW in 3 U
- Easy master/slave parallel & series operation up to 180 kW
Chroma 62000H Series Programmable DC Power Supply
- Power range: 5KW / 10KW / 15KW
- Voltage range: 0 ~ 1000V
- Current range: 0 ~ 375A
Chroma 62000H-60-1000 Programmable DC Power Supply
- Solar Array Simulator Rack for 60 kW / 1000 V / 60 A
- High power density (15 kW in 3 U)
- Precision V&I measurements
Chroma 62006P-100-25 Programmable DC Power Supply 100V, 25A, 600W
- Digital Encoder Knobs, Keypad and Function Keys
- Power Factor Correction (0.95)
- High-speed Programming
Chroma 62012P-600-8 Programmable DC Power Supply 600 V, 8 A, 1.2 kW
- Digital Encoder Knobs, Keypad and Function Keys
- Power Factor Correction (0.95)
- High-speed Programming
Chroma 62017E-600P DC Power Supply | 600 V, 1700 W
- Voltage rating: Up to 600 V
- Current rating: 22.5 A max.
- Single output models: 1.7 kW, 3.4 kW, 5 kW
Chroma 62017E-600P-3 DC Power Supply | 600 V, 1700 W
- Auto-ranging output model
- Auto sequence programming
- CV/CC modes priority
Chroma 62024P-40-120 Programmable DC Power Supply 40V, 120A, 2.4kW
- Digital Encoder Knobs, Keypad and Function Keys
- Power Factor Correction (0.95)
- High-speed Programming