Chroma 63212E-150-1200 DC Load
- Rated power: 2kW, 3kW, 4kW, 5kW, 6kW, 8kW, 10kW, 12kW, 15kW, 18kW, 20kW, 24kW
- Voltage range: 150V, 600V, 1200V
- Current range: 2000A max.
Chroma 63200A High Power DC Electronic Loads
- Up to 20 units master/slave parallel control
- Dynamic synchronous control in static and dynamic loads
- User defined waveform (UDW)
Chroma 63103A DC Electronic Load Module 80 V, 60 A, 300 W
- Up to eight channels in one mainframe, for testing multiple output SMPS
- Parallel load modules up to 1200W for high current and power applications
- Synchronization with multiple loads
Kikusui PLZ1002W Electronic Load 1000W 3-110V 200A
- 1000 watt electronic load
- Voltage range 3-110V
- Current range 0-200A
Chroma 63206A-600-420 DC Load | 600 V, 420 A
- 600 V and 6 kW
- High precision and accuracy
- Up to 10 units master/slave parallel control
Webasto (AeroVironment) ABC-150 Dual Channel Cycling Station
- 99% power factor
- Bidirectional current and power
- Reverse power flow returned to grid
Webasto 900EX High Voltage Battery Test System | 900 VDC, 250 kW
- Industry standard for high performance testing
- Flexibly test virtually any DC source, load, or battery storage system
- Enhanced error detection & fault correction
Megger TXL 850 Extra Load Unit
- 300A / 16.4kW / 56V
- Internal Resistance: 0.184 Ω, 0.275 Ω, 0.55 Ω
- Operating Temp: 0°C ... +40°C
Megger Torkel 840 DC Battery Load Tester
- "In Service" batteries can be tested
- Load currents in the test parameters are included as the unit adjusts
- Adjustable alarm and shutdown points to prevent excessive discharge
Chroma C8000 LED Power Driver Test System
- Output voltage
- Output current
- Ripple Current (RMS & p-p)
Kikusui PLZ153W 150 Watt Electronic Load
Chroma 63212 Programmable DC Electronic Load
- 150A, 1000V, or 10 kW max.
- CC, CR, CV, CP, Dynamic load modes
- Master/Slave paralleling control mode, allow synchronous load control under static and dynamic loading mode (Up to 93.6kW)
Chroma 63110A LED Load Simulator
Eagle Eye LB-480-300-CC DC Load Bank
- Rated Voltage: 480V DC
- Current Capacity: 300A
- Single Phase Power Supply
Transistor Devices XBL-600-200-6000 Dynaload
- Excellent Programming Accuracy
- High Speed Programmable Slew Rate
- Ethernet Control
Keysight 6060B Single-Input DC Electronic Load 60 V, 60 A, 300 W
Simplex Watt-Muncher DC Resistive Portable Load Bank 32 V, 70 A
Chroma 63802 AC/DC Load
- Power rating of 1800 W
- 350 V
- 18 A
Maynuo Electronic Load M9718E | 6kW, 0-600V, 0-120A
Pacific Power 3210RGS-4C Regenerative Grid Simulator
- 21 kW/kVA
- Input Power Factor 0.85
- 15 - 200 Hz
NH Research 9210 Single Channel DC Test System | 40 V, 600 A or 600 V, 40 A
- Smaller footprint makes it easier to move within a lab (roughly half the size of the 9200)
- Custom waveform/profile generation
- Sub-mS voltage, current & mode transition times
NI (NH Research) 4800 Bidirectional Power Supply | 80 VDC 16.5kW (to 165kW)
- Fully integrated battery cycler: built-in isolation contactor relays, pre-charge circuit, reverse polarity checker
- Voltage models from 80 VDC
- Modular and scalable power
Keysight SL1720A Scienlab | 100 kW, 1500 V
- SiC technology for higher dynamics, precision, and efficiency
- Up to 1.5 MW power due to parallelization
- Small footprint thanks to (modular and) compact design
Kikusui PLZ6000R Regenerative Load | 6 kW
Chroma 63108A DC Electronic Load Module 500 V, 20 A, 800 W
- Up to eight channels in one mainframe, for testing multiple output SMPS
- Parallel load modules up to 1200W for high current and power applications
- Synchronization with multiple loads