Bolab AN-ABCD-60 Artificial Network System | 1000 V, 60 A

The Bolab AN-ABCD-60 Artificial Network System is part of the AN-Series. These robust systems have high voltage and high current. With a current of 60 A, a maximum voltage of 1000 V, and a typical isolation resistance of 200 MΩ, the AN-ABCD-60 is ideal for HV applications. This model has a IP20 protection rating.

Product Info Related Products

Model	AN-ABCD-60
Series	AN-Series
Current	60 A
Maximum Voltage	1000 V
Maximum Voltage Ripple	80 Vpk
Typical Isolation Resistance	200 MΩ
Protection Rating	IP20

In accordance with LV123, ISO 21498, MBN 11123, VW 80300, and IEC 61851-23
Liquid cooled for stable resistance temperature and constant ohmic value
True continues current loading without derating, ideal for in-the-loop testing during the development stage of HV components
2x tighter tolerance than required in ISO 21498
Modular and upgradable system that grows with your testing needs
Self-monitoring, safe and reliable system

LV123
ISO 21498
MBN 11123
VW 80300
IEC 61851-23

SKU: BOLA-AN-ABCD-60

ETS-Lindgren 95236-1 Bulk Current Injection Probe

Teseq CT 419-5 Current Transformer for IEC / EN 61000-4-19

Coupling transformer designed for IEC/EN 61000-4-19
Frequency range 2 kHz to 150 kHz
4 mm banana sockets

EMC Partner IMU C-SHORT Common Mode Short Duration Testing Extension

IEC 61000-4-16 Standard
Testing capabilities that find conducted immunity
Common mode extension

PMM CDN-AF2 Coupling Decoupling Network

150 kHz - 230 MHz
4 mm Safety Lab Connectors
250 V AC / 250 V DC

Fischer Custom Communications BCICF-1 Calibration Fixture

Excellent VSWR over a broad bandwidth: <2:1 over the frequency range of 10kHz – 400 MHz when the probe is in fixture
Accommodates a wide variety of Bulk Current Injection Probes that operate between 10 kHz – 400 MHz

Solar 9142-1N Bulk Current Injection Probe | 2 MHz – 450 MHz

Bulk current injection probe
Frequency range of 2 MHz to 450 MHz
Maximum input power of 200 W

Com-Power CLCE-438 RF Current Probe | 9 kHz – 400 MHz

Frequency range of 9 kHz to 400 MHz
Suitable for CISPR, MIL-STD-461, and DO-160
Individual calibration

Com-Power CDN-S4 4 Wire Coupling/Decoupling Networks (CDN)

For Signal Lines
Frequency Range - 150 kHz - 80 MHz
Meets EN 61000-4-6 requirements

Pearson Electronics 110 Current Monitor Probe | 1Hz – 20MHz

Current monitor probe
Robust peak current capacity of 5 kA
Frequency response reaching up to 20 MHz

AH Systems ICP-621 Injection Current Probe | 10 kHz – 100 MHz

Broad frequency range of 10 kHz to 100 MHz
Individually calibrated
Split type clamp-on design

Com-Power CDN-AF2 Coupling/Decoupling Network (CDN)

For Signal Lines
Frequency Range - 150 kHz - 80 MHz
Meets EN 61000-4-6 requirements

Teseq Mil-Std-461 CS114 10kHz - 400 MHz Conducted Susceptibility Test System

Signal generation: NSG 4070-0
Modulator: included in NSG 4070-0
Power meter: 3x included in NSG 4070-0

Fischer Custom Communications F-33-2 Current Probe | 1kHz - 250MHz

Compact probes with an external diameter of roughly 71 mm and an internal diameter of 32 mm
Frequency spectrum from 1 kHz to 250 MHz
BNC connector

Solar 9123-1 Current Monitor Probe | 10 kHz – 500 MHz

Bulk current injection probe for EMI testing
Clamp-on design
Frequency range of 10 kHz to 500 MHz

EM Test LD200S19 Load Dump Generator

Load Dump generator as per Toyota Specification
Generates pulses Test 1, Test 2 and Test 3
Built-in coupling network for 60V/25A DC

Schwarzbeck CDN-S25-SUBD

Part of the coupling decoupling network series
For conducted common mode immunity testing according to IEC 61000-4-6
Frequency range of 10 kHz to 230 MHz

Frankonia MTS-800 Magnetic-Field Low-Frequency Emission and Immunity Test System

Frequency range for emission and immunity measurements: DC – 250 kHz
800W precision power amplifier, signal generator and spectrum analyzer in one compact unit
All instruments may as well be used as stand-alone devices