| Frequency Range - LTE 700 |
Tx1: 1930MHz to 1945MHz, Tx2: 1965MHz to 1995MHz, Tx3: 2110MHz to 2155MHz
Rx1: 1850MHz to 1910MHz (using Tx1 and Tx2), Rx2: 1710MHz to 1755MHz (using Tx1 and Tx3) |
| Measurements |
PIM vs. Time
Noise Floor
Distance-to-PIM
Swept PIM |
| Frequency |
Carrier F1, Carrier F2, Intermodulation Order |
| Amplitude |
Ref Value, Scale, Auto Range (On/Off), Amplitude Tone (On/Off) |
| Setup |
Output Power, Test Duration (1 s to 1,200 s) |
| Limit Lines |
Limit (Upper/Lower), On/Off, Limit Move, Limit Alarm (On/Off, PASS/FAIL indicator) |
| Markers |
Markers 1–6 (On/Off), Delta Markers 1–6 (On/Off), Marker to Peak/Valley, All Markers Off |
| GPS |
On/Off, 3.3/5.0 V |
| DTP |
Cable Velocity, Distance |
| Save/Recall |
Setups (.stp), Measurements (.pim), Limit Lines (.lim), Screen Shots (.jpg) (save only) |
| Test Method |
Reverse (reflected) Passive Intermodulation (PIM) per IEC-62037-1 |
| Intermodulation Order |
3rd, 5th, and 7th order, when in receive band (user selectable) |
| RF Test Power |
Two CW tones 20 dBm to 46 dBm, 0.1 dBm steps
Accuracy: ±0.5 dB (excluding uncertainty) |
| RF Test Frequency |
Accuracy: ±1.0 ppm at 23 ºC
Stability: ±1.0 ppm from –10 ºC to +55 ºC, typical
Aging: ±1.0 ppm/yr aging, typical |
| Residual PIM Performance |
<–117 dBm, <–125 dBm typical (2x 43 dBm test tones)
<–134 dBm, <–140 dBm typical (2x 20 dBm test tones) |
| PIM Measurement Range |
–70 dBm to –140 dBm (Revision 1 instruments)
–50 dBm to –140 dBm (Revision 2 instruments) |