Conducted LF/RF Immunity

The Teseq NSG 4070B is a multifunctional device for EMC immunity tests, including LF/RF immunity and transient, with a frequency range of 9kHz to 1GHz. Its modular setup uses internal or external amplifiers to...

The Frankonia CIT-1000 Conducted Immunity Test System builds on the quality of the CIT-10 and adds an extended frequency range of 10 kHz to 1200 MHz. This system comes with integrated touchscreen technology as...

The Schloder CDG7000 Conducted Disturbances Test System is a multifunctional device, designed to meet interference immunity standards. With an RF signal generator, an RF power amplifier, a 3-channel RF voltmeter,...

The Amplifier Research CI00402 RF Conducted Immunity System is a fully integrated state-of-the-art system that is engineered to perform RF conducted immunity tests. Amplifier Research CI00402 systems incorporate...

The AE Techron 7234 Audio Power Amplifier is a single-phase amplifier and battery simulator with an RMS power output of 900 W. This rugged and user-friendly audio power amplifier is the ideal device for a variety...

The AE Techron DSR 100-200 is an automotive voltage dropthat provides complete a single-box solution for immunity testing. The DSR 100-200 includes a powerful, four-quadrant, AC/DC supply capable of up to 800A...

The BOLAB AN-ABCD-300-C10 Artificial Network is a robust and self-monitoring system that is ideal for EV HV testing. This model has a current of 300 A, a maximum voltage of 1000 V, and an IP20 protection rating...

The Bolab AN-ABCD-60 Artificial Network System is part of the AN-Series. These robust systems have high voltage and high current. With a current of 60 A, a maximum voltage of 1000 V, and a typical isolation...

The BOLAB 100-TS Series includes several models of arbitrary 4-quadrant voltage and current amplifiers with output powers spanning from 400 W to 18000 W. With a full bandwidth range of DC to 200 kHz, this series...

The AE Techron 3110  is a standards waveform generator which generates ripple wave forms of up to 300 kHz and equips technicians with a vast library of automotive and aviation test standards, holding a max...

The AE Techron 3110A Standards Waveform Generator is can generate LF wave sequence with a bandwidth of DC to 1 MHz. This 3110A model reduces test time for repetitive test sequences, featuring a rise time of under...

The AE Techron 7224 Power Amplifier generates 900VA RMS of energy for high-power applications to 40kHz, with a small signal bandwidth of 20Vp-p to 300 kHz and 16A of DC power at 13.5 VDC. A single 7224 can output...

The AE Techron 7228 Linear Power Amplifier produces 1000W RMS model AC power up to 20kHz, and for high-power applications, up to 100kHz. This model operates at a small signal bandwith of 8Vp-p to 1MHz and outputs...

The AE Techron 8302 RF Amplifier is a reliable audio amplifier capable of helping technicians meet several testing requirements. The device has a bandwidth of DC to 50 kHz, a distortion of <0.2%, and more. The...

The T1000 Magnetic-Field Susceptibility Transformer was designed to exceed the AF Magnetic Field susceptibility test requirements of DO 160 Section 19 and Boeing D6-16050 Section 7.2.2. It may also be used as a...

The T2000 Audio-Bandwidth Conducted Susceptibility Transformer was designed to meet or exceed the LF conducted susceptibility test requirements of DO 160 Section 18. The T2000 is used to apply the required test...

The T3700 Electric-Field Susceptibility Transformer was designed to meet or exceed the voltage requirements of DO 160 Section 19 and Boeing D6-16050 Section 7.2 testing. It may also be used as a 1-to-37 step-up...

The Model CI00250A is a fully self-contained state of the art system designed to test RF Conducted Immunity. The CI00250A contains all the instruments needed to perform conducted immunity testing to the IEC 61000...

The Model CI00400A is a fully self-contained state of the art system designed to test RF Conducted Immunity. The system contains a signal generator, 3 channel power meter, 100W nominal AR amplifier 10kHz to...

The Amplifier Research MT06000 Multistar Multi-tone RF Radiated Immunity System 80 MHz - 6 GHz is a state-of-the-art system designed to test RF Radiated Immunity faster than ever before possible. By testing...

The BOLAB Systems BLS-130-70N-TS 4-Quadrant Voltage Amplifier features a bandwidth range of DC to 200 kHz and an output power of 3000 W. With a maximum voltage of 70 V and a current of 114 A, the BLS-130-70N-TS...

Com-Power CDN-AF2 Coupling / Decoupling Networks (CDN) are for testing from 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted disturbance induced by radio frequency...

Coupling / Decoupling Networks (CDN) are for testing from 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted disturbance induced by radio frequency fields. As the...

Com-Power CDM-AF8 Coupling / Decoupling Networks (CDN) are for testing from 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted disturbance induced by radio frequency...

Coupling / Decoupling Networks (CDN) are for testing from 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted disturbance induced by radio frequency fields. As the...

The Com-Power CDN M125 Coupling / Decoupling Networks (CDN) is used to couple common mode and modulated signals onto single power line systems.

Coupling / Decoupling Networks

Com-Power CDN-M325 units are for testing from 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted disturbance induced by radio frequency fields. As the name...

The Com-Power CDN-M425 Coupling/Decoupling Network (CDN) is for testing units in the range of 150 kHz - 80 MHz according to the EN 61000-4-6 standard for immunity to conducted disturbance induced by...

Coupling / Decoupling Networks (CDN) are for testing from 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted disturbance induced by radio frequency fields. As the...

The Com-Power CDN-S1 Coupling/Decoupling Network (CDN) is for testing from 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted disturbance induced by radiofrequency...

The Com-Power CDN-S2 2 Wire Coupling/Decoupling Networks (CDN) are designed for testing in the range of 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted...

Coupling / Decoupling Networks (CDN) are for testing from 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted disturbance induced by radio frequency fields. As the...

The Com-Power CDN-T2 Wire Coupling/Decoupling Networks (CDN) are designed for testing in the range of 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted...

Coupling / Decoupling Networks (CDN) are for testing from 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted disturbance induced by radio frequency fields. As the...

The Com-Power CDN-T8E CDN is designed specifically for testing compliance to IEC/EN 61000-4-6 conducted immunity requirements. Com-Power CDN-T8E CDNs feature RJ45 connectors for both EUT and AE connection and...

The Com-Power CLA-150 Absorbing Clamp was designed for EMC emissions measurement of from electrical instruments via their connecting leads. The absorbing clamp is described in CISPR 16 part 1-3: Radio disturbance...

Immunity test to conducted disturbances, induced by radio-frequency fields according to the standards IEC/EN 61000-4-6 and IEC/EN 60945 introduce different types of coupling/decoupling networks according to the...

The CWS 500N1 Continuous Wave Simulator is the most compact single box test equipment for testing conducted RF immunity as per IEC 61000-4-6, 60601-1-2, and related standards with a frequency range of 100kHz to...

The EM Test CWS 500N2 Continuous Wave Simulator is the first compact solution world-wide for testing RF conducted immunity for IEC 61000-4-6 to narrowband radiated electromagnetic energy. Apart from the injection...

The EM Test CWS 500N3 Low Frequency Simulator 10 Hz - 250 kHz is the state-of-the-art solution in a compact single-box design to test the immunity to conducted low-frequency disturbances and low-frequency...

The EM Test CWS 500N4 Conducted Simulator is the state-of-the-art solution in a compact single-box design to test for immunity to conducted, common mode disturbances in the frequency range 0Hz (DC) to 165kHz...

The EMC Partner CN16T8 DC Coupling-Decoupling Network is used to measure conducted immunity and reliably tests for Electromagnetic Compatibility (EMC). With 8 lines and 4 pairs, this coupling network works with 8...

The EMC Partner EXT-IMU C-SHORT Common Mode Short Duration Testing Extension provides additional testing options and versatility to TRA and IMU generators. Featuring a frequency range of 0 Hz to 150 kHz, the EXT...

The EMC Partner IMU Slave Smart I1V1External Module is a voltage and current test generator that allows users to test for the IEC 61000-4-19 industry standard. The device has a frequency range of 2kHz to 150kHz...

The EMC Partner IMU-MGS C Common Mode Extension works with IMU and TRA generators. The IMU-MGS C allows for common mode testing to meet the IEC 61000-4-16 industry standard. Featuring an adjustable sweep...

The ETS-Lindgren 95236-1 Bulk Current Injection Probe has a 1.6" window, making it suitable for injecting current into most power or signal cables. (AWG 4/0 cable, good for several hundred Amps, is 12.7 mm...

Injection Probe calibration fixtures are a part of the test equipment required by most of the Bulk current Injection Test Procedure Specifications. The FCC-BCICF-1 Calibration Fixture allows the user to quickly...

RF electromagnetic fields frequently degrade the performance of electronic equipment by generating common mode currents on cables. The effect of these E and H fields on the equipment can be reproduced by...

The Fischer Custom Communications F-130A is a versatile and high-performance injection probe, designed specifically for susceptibility testing, conforming to the standards of GM 9112P and SAE-J15447. This model...

RF electromagnetic fields frequently degrade the performance of electronic equipment by generating common mode currents on cables. RF immunity to these fields can be verified by injecting common-mode currents...

RF electromagnetic fields frequently degrade the performance of electronic equipment by generating common mode currents on cables. RF immunity to these fields can be verified by injecting common-mode currents...

The Frankonia CIT-10 Compact Immunity Test System, 10 kHz - 400 MHz is a complete test system for conducted RF-immunity tests according to IEC/EN 61000-4-6, ISO 11452-4, MIL-STD 461E/F CS114, SAE-J1113-2, DC...

The Frankonia MTS-800 Magnetic-Field Low-Frequency Emission and Immunity Test System is a compact test system for broadband generation and measurement of magnetic fields. Its internal components allow automatic...

The PMM 150-50-BCI Ohm Adapter is designed for BCICF-4 calibration Jigs with a frequency range of 10 kHz to 230 MHz and 9.5dB +.5dB insertion loss EUT/AE. This 150-50-BCI  model is used for conducted...

PMM BCICF-4 Injection Probe calibration fixtures are a part of the test equipment required by most of the Bulk Current Injection Test Procedure Specifications. The PMM BCICF-4 test fixture allows the user to...

PMM BCICF-6-150 Injection Probe calibration fixtures are a part of the test equipment required by most of the Bulk Current Injection Test Procedure Specifications. The PMM BCICF-6-150 test fixture allows the user...

The PMM CDN AF2 is part of the coupling/decoupling network series for conducting common mode immunity tests in accordance with IEC 61000-4-6. The PMM CDN AF2 is compliant with IEC 61000-4-6 Annex D3 and is...

The PMM CLA-050 absorbing clamp was designed for EMC emission measurements from electrical instruments via their connecting leads. The absorbing clamp is described in CISPR 16 part 1-3: radio disturbance and...

The PMM CLCE-400 RF Current Probe, a key component of Com-Power's comprehensive range of RF conducted emission/immunity testing and calibration solutions, excels in ensuring compliance with standards like...

The PMM Cond-IS/10 system has been designed to provide all necessary components required for testing in accordance to IEC/EN 61000-4-6 with just one “package”, not losing modularity but still...

The PMM Cond-IS/10-CIP Conducted Immunity System operates from 10kHz to 230 MHz for injection probe method applications. The PMM Cond-IS/10-CIP system has been designed to provide all necessary components...

The PMM EMCL-20 EM injection clamp establishes both capacitive and inductive coupling to the cable connected to the EUT, with a maximum cable diameter of 20 mm. The PMM EMCL-20 clamp (in contrast to the...

The PMM EMCL-35 EM injection clamp establishes both capacitive and inductive coupling to the cable connected to the EUT, with a maximum cable diameter of 35 mm. The PMM EMCL-35 clamp (in contrast to the...

The PMM F-120-9A injection probe is an additional component in the Cond-IS RF conducted immunity system. The PMM F-120-9A comes included with your Cond-IS RF conducted immunity system. The PMM F-120-9A...

The PMM Rad-IS/3G-600 radiated immunity system can offer several possible systems for a variety of tests (depending on the max field-strength required for testing). The PMM Rad-IS/3G-600 is a system for radiated...

The PMM Rad-IS/3G-600 radiated immunity system can offer several possible systems for a variety of tests (depending on the max field-strength required for testing). The PMM Rad-IS/3G-600 is a system for radiated...

The PMM Rad-IS/3G-601 radiated immunity system can offer a variety of tests (depending on the max field-strength required for testing). The PMM Rad-IS/3G-601 is a system for radiated immunity that tests up to...

The PMM Rad-IS/3G-602 radiated immunity system can offer a variety of tests (depending on the max field-strength required for testing). The PMM Rad-IS/3G-602 is a system for radiated immunity that tests up to...

The Solar 2352-1 Audio Power Amplifier has a wide band frequency response and is capable of providing up to 300 Watts at 1000 Hz into 2.0 Ω at low distortion levels. The 2352-1 requires approximately 0.5...

The Solar 9108-1N is a bulk current injection probe suitable for frequencies between 10 kHz and 200 MHz. This model has a 1.25-inch diameter window and supports a 10 A winding current. This 50 W probe is designed...

The Solar 9120-1N Injection Probe features a split toroidal design for easy clamping onto test wires and is calibrated for insertion loss and transfer impedance. The device's testing fixture ensures a low...

The Solar 9142-1N Bulk Current Injection Probe has a frequency range of 2 MHz to 450 MHz, a maximum input power of 200 W, and a maximum input current of 50 A. With a clamp-on design, this bulk current...

The Solar 9144-1N Injection Probe boasts a unique split toroidal structure, enabling it to open and clamp onto test wires. Calibrated in a specialized test fixture for its window size, each probe is accurately...

The Solar 9335-2 is a multifunctional impedance coupling device used in various EMC testing applications. Engineered as a split toroid, this device excels in its role as an impedance matching transformer. The...

The Solar 9719-1N Injection Probe is a high-performance device used in EMC testing for injecting high-frequency currents into cable bundles and wires. Operating within a frequency range of 10 kHz to 350 MHz, it...

The Teseq (Schaffner) KEMA 801A Decoupling Clamp is a decoupling network and RF absorbtion clamp. This clamp allows EMC testing to be done without the use of a CDN, but with the advantages of decoupling from...

The Teseq CDN USB/P is a CDN with a USB connector for EUT-peripheral devices. IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the...

IEC / EN 61000-4-19 specifies the differential voltage test in the frequency range 2 kHz to 150 kHz. Teseq offers with CDND M316-2 a coupling / decoupling network for single phase mains application. It can be...

The Teseq CN Series Coupling Network (CN) is designed for IEC / EN 61000-4-16, DC to 150 kHz. Each coupling network is related to the type of cable and connector; a specific 60 dB decoupling network is required...

IEC / EN 61000-4-19 specifies the differential current test in the frequency range 2 kHz to 150 kHz. Teseq offers with CT 419-5 a transformer with integrated matching network for testing EUTs like electricity...

The Teseq ITS 6006 Radiated Immunity Test System 6 GHz consists of an integrated RF signal generator, RF switch and EUT monitoring interfaces. The unit is designed for various radiated EMC applications in the 80...

IEC 61000-4-6 (EN 61000-4-6) defines three basic types of transducer used for the injection of test signals into the equipment under test (EUT). The basic requirement is to inject a known level of RF signal onto...

Advanced Test Equipment Rentals provides all components for the mil-std 461 CS114 test system using the Teseq NSG4070 as the nucleus.

The Teseq NSG 4060 is an EMC immunity test system for the frequency range 15 Hz to 150 kHz. It consists of sine wave generator, power amplifier and EUT monitoring interfaces. The application range includes tests...

The NSG 4070, successor of the NSG 2070, is a multifunctional EMC immunity test system. Its large frequency range from 9kHz to 1GHz and its modular set-up using internal or external amplifiers enable a large...

Teseq NSG 4070C Test Systems for Conducted and Radiated Immunity are a series of multi-functional EMC test instruments ideal for conducted immunity and radiated immunity testing. Teseq NSG 4070C models conform to...